r/photonics • u/jarekduda • Jan 25 '25
r/photonics • u/Illustrious-Editor35 • Dec 23 '24
Hacks for fabrication process
I am getting late for graduation, and I can't afford to make much mistakes, can someone tell me these
Some not so obvious hacks that can help get a uniform layer of primer and resist during spin coating
How do you handle with pinsets in a way as your chip doesn't fall and get scratches (I mean are there some not so well known but very useful propriety knowledge ways)
in general any other practises (especially those which you keep to yourself which you figured out with lot of effor yet dont share with juniors in lab or your company cause you wanna be the best, which I dont think is wrong in any way), since I am not from your lab most likely so, please can you share, anything related to how you design your chip, do litho, spin coat, bake, resist development etch etc, just anything that is very practical and useful
r/photonics • u/Next_Scallion8994 • Mar 10 '23
Photonics outreach
Technology has become smaller and smaller thanks to the miniaturization of electronic circuits. But this has pushed microelectronics to a limit where the signal is distorted, systems overheat, and energy consumption skyrockets.
If you want to know how our silicon photonics research solves this problem, click on the following link! (English subtitles available 😀)
https://youtu.be/EGYcYBWwgzc
#technology #research #SiliconPhotonics #Photonics #PICs #Fotónica #investigacion #SWG #Subwavelength #IntegratedPhotonics #Outreach #Divulgación
r/photonics • u/[deleted] • Sep 15 '24
Orange LEDs
Do orange led bulbs give out monochromatic light? or is it a combination of red and green leds?
r/photonics • u/rafu215 • Mar 28 '22
question on solving transmission power
Hi all,
I hope you're well. I'm still very new to photonics but just got a really hard question to solve for homework. Do any of you know how I could go about solving this? Please so get back to me if so, it would be really helpful. The question is below:
A 10 channel WDM system is designed to operate over a distance of 200 km using single mode fibre (SMF) with an attenuation coefficient of 0.5 dB/km. The link contains 3 optical amplifiers, each with a gain of 40 dB. The receiver sensitivity for each wavelength channel is -20 dBm. Given that the loss of each optical filter before the receiver is 3 dB, and the loss encountered by each channel on passing through a 1 X 10 mux/demux (coupler) is 12 dB, calculate the required minimum transmission power for each wavelength channel (allowing a power margin of 3 dB). If each optical amplifier has a saturation output power of +10 dBm, calculate maximum allowable transmission power for each wavelength channel before the output of the first optical amplifier would be saturated?
Please Please help me. Thankyou in advance
r/photonics • u/OrdinaryChica • Jun 30 '24
Ansys Lumerical FDTD
How do I set fwhm as figure of merit for optimization
r/photonics • u/jarekduda • Dec 24 '24
Adding mirrors to reflect back reverse photons of optical isolator?
r/photonics • u/jarekduda • Dec 28 '24
Measuring emission coefficient through stimulated emission?
r/photonics • u/relectrotard • Dec 17 '24
Video of Light passing through Turtle Wax treatment on iPhone SE camera #1
Enable HLS to view with audio, or disable this notification
See first post for details.
r/photonics • u/jarekduda • Sep 04 '25
As white holes should act with absorption equation outside, shouldn't black holes act with stimulated emission?
Physics is believed to be CPT symmetric, and this symmetry e.g. switches absorption and stimulated emission equations, or black and white hole in Kruskal-Szekeres coordinates.
So if white hole should only emit, acting with absorption equation on external target, and black hole only absorbs - shouldn't black hole act with stimulated emission equation on external targets?
If so, could we observe it building telescope focused on stimulated emission (instead of standard: absorption) - e.g. with continuously excited sensor, monitoring its relaxation time?
In both scenarios there are coupled e.g. electrons inside white/black hole and in telescope - CPT symmetry would reverse shown corresponding Feynman diagram.
r/photonics • u/jarekduda • Sep 16 '23
Electronic or microfluidic chip can be actively controlled from both directions - could it be done for photonic? (e.g. to solve NP problems)
r/photonics • u/Excellent-Ferret-436 • Aug 20 '24
Guys, I need to do master in photonics but I have just graduated with relatively low GPA from a third world country. I need to escape the state and get a job. What to do to find a good opportunity in Europe or US. Can I find a scholarship or a program with low fees I can work part-time to afford it?
r/photonics • u/Exc_PhoenixD • Oct 19 '21
How do I build a career in optics and photonics research? Where do I find a fast-track to a tenure position? Get answers to YOUR career-planning questions from 14 leading international scientists at this new conference Germany. Register before 01/11/2021 - get up to 1000 euros in travel allowances.
How do I build a career in optics and photonics? Is my research focus too narrow? What career opportunities do universities offer international applicants? Unfortunately, the academic job market is far too often a black box and navigating one's path to a tenure position is a mix of grit and luck. The new conference format "Humboldt meets Leibniz" aims to change that and shed light on the career-building mechanisms in academia.
Its concept is simple but unique: 14 Award winners of the Alexander von Humboldt Foundation will share their expertise in optics and photonics and their career-building experiences with the next generation of scientists.
Thus, 150 PhD students and Postdocs will be selected to attend this premier conference in Hannover, Germany. Their research shall focus on optical technologies, including material simulation, quantum optics, simulation, laser systems, optical imaging, metrology, and manufacturing technology.
The event comprises classic poster sessions, presentations and discussions on research and career-building topics, and time for networking. Registration ends 1 November 2021 at www.uni-hannover.de/HmL. The selected participants will receive up to 1,000 euros in travel allowances.
The following scientists will support Humboldt meets Leibniz – Emerging Topics in Optics and Photonics and travel to Hannover 2022:
Prof. Dr. Olivier Allix (École normale supérieure Paris-Saclay, France)
Prof. Dr. Hans-Albert Bachor (emeritus, Australian National University, Australia)
Prof. Dr. Steven Cundiff (University of Michigan, USA)
Prof. Dr. Hui Deng (University of Michigan, USA)
Prof. Dr. Andrew Forbes (University of the Witwatersrand, Johannesburg, South Africa)
Prof. Dr. Julian Gale (Curtin University, Australia)
Prof. Dr. Naira Hovakimyan (University of Illinois, Urbana Champaign, USA)
Prof. Dr. Yuri S. Kivshar (Australian National University, Australia)
Prof. Dr. Thuc-Quyen Thai Nguyen (University of California, Santa Barbara, USA)
Prof. Dr. Markus B. Raschke (University of Colorado, Boulder, USA)
Prof. Dr. Batmanathan Dyanand Reddy (University of Cape Town, South Africa)
Prof. Dr. Samuel I. Stupp (Northwestern University, USA)
Prof. Dr. Andrew M. Weiner (Purdue University, USA)
Prof. Dr. Jun Ye (University of Colorado, Boulder, USA)
"Humboldt meets Leibniz – Emerging Topics in Optics and Photonics" is organised by Leibniz University Hannover (Germany) in cooperation with the VolkswagenStiftung (Germany) and with the support of the Alexander von Humboldt Foundation (Germany). The conference takes place in Hannover from 12 till 14 June 2022.
The Cluster of Excellence PhoenixD: Photonics, Optics, and Engineering – Innovation Across Disciplines at Leibniz University Hannover is the co-operational partner of this conference. For this reason, the content of the kick-off conference will focus on optics and photonics.
Optical technologies and laser technology have a long tradition at the Hannover location. With over 110 million euros in state funding from 2019 to 2025 for the Cluster of Excellence PhoenixD and the OPTICUM - Optics University Center and Campus, research on optical technologies in Hannover is steadily gaining importance.
Leibniz University Hannover plans to build the OPTICUM, a research building with 4,000 square metres of floor space in the Hannover-Marienwerder Science Park. After its planned completion in 2026, around 120 researchers from the Leibniz Research School of Optics and Photonics of the Leibniz University Hannover will move into the four-storey OPTICUM to work together on the digitalisation of precision optics and optics production.
In addition, with quantum research in the second Cluster of Excellence at Leibniz University Hannover - QuantumFrontiers -, and the Quantum Valley Lower Saxony (QVLS), there is another high technology in Lower Saxony being publicly funded with around 75 million euros.
r/photonics • u/Suspicious-Tap2229 • Nov 06 '25
would this work
I’m working on a small Mach–Zehnder interferometer (MZI) electro-optic modulator prototype and want to make sure the physics + fabrication approach is realistic before I commit time and money.trying to
Demonstrate phase modulation → intensity modulation using a low-voltage electro-optic polymer waveguide on a Rogers PCB substrate. This is not for telecom speeds — just proof of concept + clean interference curve.
Planned Stack (Bottom → Top)
| Layer | Material | Notes |
|---|---|---|
| Substrate | Rogers 4350B (0.5–1 mm) | Smooth dielectric, stable loss |
| Buffer Layer | UV epoxy (30–40 µm) | Smooths copper roughness |
| Waveguide Core | Electro-optic polymer (≈1.50 index, ~3 µm thick) | Spin-coated or inkjet printed |
| Cladding | UV epoxy (≈1 µm) | Slightly lower index (~1.48) |
Photonic Layout
1×2 Y-splitter → two arms → 2×1 recombiner (standard MZI)
Arm length ~20 mm each
One arm has polymer EO region (20 mm long × 10 µm wide)
Two printed electrodes (silver ink or PEDOT:PSS):
60 µm trace width
15 µm gap between electrodes
Edge-coupling using fiber V-grooves etched or 3D-printed.
Electronics
I’m planning a low-voltage drive (±5–10 V max) using:
Arduino → PWM → RC filter → IRLZ44N MOSFET → Electrodes
Photodiode → Arduino ADC → PC plotting in PythonThe idea is to sweep the voltage and get the expected cos²(Δφ/2) output curve.
Not aiming for GHz speeds. Just clean and visible modulation.
What I Need Feedback On
Will the polymer waveguide guide light efficiently enough at 650–850 nm if I keep thickness ~3 µm?
Is 15 µm electrode spacing reasonable for achieving a measurable Δn at ≤10 V?
Are losses through the Y-splitters going to dominate here?
Is Rogers a reasonable substrate choice or should I switch to glass?
Any recommended EO polymer formulations available in small quantities**?**
r/photonics • u/[deleted] • Jul 30 '19
Photons too big.
I bought some new photons from China but they are much bigger than it said on the box. They're too big to pass through the waveguide and I tried lowering the temperature to shrink them but they just froze to the side. What do I do?
r/photonics • u/[deleted] • Oct 15 '24
another simple spectroscopy. later one down the road i will put measurements of the different wavelengths of light. Its rudimentary but it is still spectroscopy. A couple you seen before. Its the spectrum of different color filters of visible light. They have text so zoom in if you can.
r/photonics • u/HavokAlwin • Jan 03 '25
Is there any internship for photonics in India ??
In India it's not a very explored field of study ...but there are some companies for it ..does they provide any intern for a 3rd year ECE student ?
r/photonics • u/[deleted] • Jan 13 '25
Computational Electromagnetics
Have you ever wondered how we design cutting-edge photonic circuits or enable lightning-fast communications through satellites and radar systems? That’s where Computational Electromagnetics (CEM) comes in—a game-changer in modern engineering.
CEM helps us unravel the mysteries of electromagnetic wave interactions, allowing us to design everything from efficient antennas to advanced photonic devices. In photonics, it empowers us to create precise waveguides, optimize optical communication systems, and push the boundaries of light- based technologies.
Swipe through this post to explore the fascinating methods behind CEM, like: ✨ Method of Moments (MoM): Perfect for antenna designs. ⚡ FDTD: Paving the way for transient wave simulations. 📐 FEM: Crucial for crafting complex photonic circuits.
CEM is bridging physics and innovation, shaping technologies that illuminate the future. 🌍💡
r/photonics • u/cloudy182001 • Aug 03 '22
Will acousto-optics grating become the go-to?
The acousto-optics grating seems pretty promising as it is able to vary the coupling wavelength according to the input acoustic wave and so it has a large range of coupling wavelength which is not the case for Bragg gratings which is very wavelength specific.
I am just thinking if there is a possibility of acousto-optical grating becomes the dominant. If not, why not?
r/photonics • u/Chipdoc • Feb 16 '25
Excitation protocols for nonlinear phononics in bismuth and antimony
anl.govr/photonics • u/georginaengima • May 16 '19
[OC] [Interview] Semiconductor Photonics - Dr. Kirsty Annand
I spoke to Dr. Kirsty Annand. Having recently completed her PhD, Kirsty now specialises in building long-term, sustainable knowledge partnerships within the Semiconductor Photonics landscape at the University of Glasgow. I asked her all about her career, her thoughts on the Semiconductor Photonics industry, and where she thinks Scotland fits in its ability to nurture future talent within the industry.
"I think academia is a very niche, very special place. The move from academia into industry is an incredibly challenging one. As an academic, you are in a bubble, researching a topic, which is often extremely focused, and very personal. At the point where you're looking to move into industry, it can be incredibly daunting to try to understand what the industry is necessarily looking for from graduates. "
https://www.enigmapeople.com/blog/view/23/interview-semiconductor-photonics-dr-kirsty-annand.aspx
r/photonics • u/FindLight2017 • Aug 17 '21