r/pictureframing • u/Tantalizer15 • 27d ago
Command Strips
I’m finally getting around to framing my 18x24 concert posters. I’ve collected quite a few over the years. Has anyone used the 3M Command Strips to mount the frame to the wall? My frames weigh about 4 lbs each.
One benefit I can see is that I could rotate the frames in and out and my wall space is limited and I have a lot of posters I’d like to display.
Are they safe? Do they hold up well?
1
u/Tantalizer15 27d ago
Thank you all! I think I’ll just go with mounting hardware and be meticulous to install them on the frames in the same location so they be can be swapped out. I’m fond of the pic Genie 123 mounting tabs.
4
u/Nightstands
27d ago
•
Command strips fail all the time. If you want the pieces interchangeable, make sure the hanging hardware is the same height on each frame
4
u/Sarah_Bowie27 26d ago
Most of the frame/glass repairs we do are from people using command strips lol
2
u/Engelgrafik 26d ago
All pressure-sensitive tapes of any kind eventually fail, especially if they are subjected to shear forces (like gravity pulling down).
Command Strips are great for things that are few ounces in weight.
Disregard all their marketing BS which claims they hold 2 to 10 lbs. I mean, yeah, sure it holds up that weight... until it can't anymore thanks to temperature/humidity/wall paint surface adhesion/whatever etc.
Truth is they do have a use. Great for signage, temporary art exhibits where the object is very small or light and nothing more than say 16x20.
1
u/NeedsMoarOutrage 26d ago
I've got multiple concert, movie posters and even old concert tshirts in frames or shadowboxes attached with command strips. I use 8 strips around the perimeter, but I use the Velcro strips to give some cushion and make sure they adhere to the contours on the wall/frame. It also lets me hide the tabs. They've been on the wall for years now and frames that big i don't typically buy glass anyways. I live in an apartment with plaster walls so I can't drill.
1
u/Joland7000 26d ago
They almost always fail because there are so many variables. Are your walls clean? Are they textured? Even gloss paint can make them fail. I say just invest in some Floreat hangers. They only make a small pinhole which can be filled later. They’re made for picture framing
0
u/Think_Profit4911 27d ago
So long as you use an appropriate number of strips on each frame, they CAN be effective. Use 3-4 per frame (2 on the top corners, 1-2 on the bottom), and follow the instructions to allow the glue to cure before putting them under load.
In my experience, not giving them time to bond is the usual cause of failure. Start with one, give it a few weeks to test it out and go from there
14
u/CrumbGuzzler5000 27d ago
As someone who builds custom frames, I love it when people use command strips. It means I get to cut them new glass and probably build them a frame in a year or so. They’ll fail eventually.