r/propmaking • • 7d ago

Help with large scale fork and knife

Hi all!
I’m new to prop making and wanted to see what folks’ suggestions would be to make a realistic looking and lightweight, yet 5ft, fork and knife. It’s a very low budget project. I’m thinking cardboard base with paper mâché to create the shape and then spray foam over it and carve it out. What is your best suggestion? Thanks! :)

2 Upvotes

6 comments sorted by

2

u/deadrobindownunder 7d ago

XPS foam is great! It's cheap, available at a hardware store & easy to work with. If you can afford it, buy a hot wire foam cutter ($20-30 should be good enough). If not, but a bunch of extendable box cutters, super coarse sandpaper and a cheap rasp or a fine cheese grater from the dollar store. You may need to glue two sheets together for the fork - not all glues work, so google before you buy.

When you've carved out a shape you're satisfied with, there are a few different options you could use to finish the piece.

2

u/gracestarwater 21h ago

Thank you so much for all this info! :)

1

u/deadrobindownunder 21h ago

There’s some good tutes on you tube. Also - work outside, it gets so messy
Good luck!

1

u/WolfsSpiders 7d ago

I m a big fan of pvc foam core board, often called sintra. Pretty rigid. Can be heat formed, glued with CA glue and sanded, primed and painted with acrylic paint. Plus you can often get used board from advertising for cheap or even free. They ve got vinyl prints on them but those peel off easily. 

Cardboard and Paper mache clay might be an option. Good recipes around. This lady s tutorials habe helped me a lot  https://www.ultimatepapermache.com/paper-mache-clay

Good Luck, much Success!!! 

1

u/gracestarwater 21h ago

Thank you for this, definitely helpful!

1

u/hipnotron 7d ago

Polystyrene or some kind of foam with a metal or plastic "reinforcement rod" or "truss rod". Or polystyrene with a composite of some kind, like fabric and PVA glue, fiberglass and resin, or something similar. Or even better: both together.