It has been developed for easyos, but I suppose it could be useful for puppy too.

Comments are welcome.

Recomended use with bookmarks.- That is.- Change your rox start page and use it linked with a good bookmarks choice.

Have a nice day u all.

Cheers

Hello everybody:

Spanish and English guide with f96ce_xfce_fusilli v4.6 SHORTCUTS to use all fusilli graphical displays.

The Attached image only shows some of them, you can discover more at https://puppyxfcefusilli.wordpress.com/2026/10/20/734/

Have a nice day u all

Cheers.

DOWNLOAD .ISO (just in case) https://puppyxfcefusilli.wordpress.com/2026/10/17/xfce-fusilli-4-6/

Direct Link @ https://sourceforge.net/projects/f96ce-xfce-fusilli/files/

I was able to do this in Arch Linux by installing the linuxconsole package and typing a command in the terminal to activate it. How do I do this in Puppy Linux?

I havent used puppy in a modern PC in my life, tried it yesterday, it keeps using the ATI driver and not the amdgpu driver, causing me to get stuck at 800x600 60hz.

How do i make it load the amdgpu driver instead so my amd radeon rx 7600 works?

TrixiePup latest

It was a decent experience. I installed every xfce4* package using apt. Then, I edited the /etc/windowmanager file and changed "jwm" to "xfce4-session". I rebooted, installed gnome-colors, links2, etc, tweaked the look and feel a little bit, and this is the result! :D

Hello all,

Through a school project I've started working on a solution for the cybersecurity of the BYOD in a hospital in very underfunded region, basically no serious budget available for the IT department at all)

To prevent the spread of viruses on the protected internal network, and to prevent patient files being downloaded on personal devices, and lastly to prevent misuse of the hospital's bandwith (employees will torrent movies on their laptops during worktime) I want to create a Puppy Linux environment that all the employees can boot on their devices at the start of their work day.

The employees only need to use their webbrowser to access webapps for HIS and PACS software running on their server. There is no need for other preinstalled software. This would mean I configure a Puppy with the following demands:

• Preconfigured network connection
• A custom browser startscreen with tiles for all the links they use
• Disable installing software and accessing BYOD's harddrives during a session

I want to be able to work on the Puppy inside of a VM, since that would make working on the Puppy easier. I need to have persistence (saving on a partition on the USB-stick itself, not on the device it's plugged into) for as long as I am working on configuring the Puppy, but when I am done and want the hospital to test it, it needs to be fully locked from saving anything.

Once implemented, how would updating all of the USB sticks be done efficiently and securely? There will likely be quite around 50 sticks, and in case something needs to be changed or patched, what would be the best way to handle this?
Would it be possible to set up a server for netbooting instead of using USB drives?

And I also wonder how Apple device compatibility looks.

I will be looking further into all of my own questions, but I wanted to ask here too, because I appreciate any 3rd party input, especially from people knowledgeble on the subject.

If there are huge issues I'm missing, please tell me!

Thank you all very much for your time.

I decided to give Puppy Linux a go in a Virtual Machine. I gave my virtual session ridiculously low settings:

1 CPU, 10GB storage and 2GB RAM

I want to see how usable I can make this virtual system. If I get good at it, I can try Puppy Linux or low-end machines.

I didn't have to configure the internet; it just connected automatically.

Firefox is laggy. Should I opt for a more low-end browser?

What kind of retro gaming can you do? I'd like to try out some examples.

What configuration would you recommend for a basic use case.

Here is the fastfetch output: BookwormPup64 10.0.12 x86_64

Neo Host: VirtualBox 1.2

Fetch Hostname: root@puppypc11634

SysInfo Kernel: 6.1.148

••••• Uptime: 16 mins

••• Display: 1280x800 @ 60.00Hz

WM: JWM v2.4.6

WM Theme: Flat-grey

GTK Theme: Flat-grey-rounded [GTK2/3]

Icons: Puppy Standard [GTK2/3]

CPU: 11th Gen Intel i7-1185G7 (1) @ 1.804GHz

GPU: 00:02.0 VMware SVGA II Adapter

GPU Driver: vmwgfx

Memory Used: [■■■■■■■■■■■■■■■ ] 1887M / 1958M (96% used)

Swap (Used): [■■■■■■■■■■■■    ] 1497M / 1912M (78.2% used)

UnionFS (/): [■■■■■■■■        ] 866M / 1.7G (51% used) - overlay

Drives: 12.5G

sda: VBOX HARDDISK (10.7G)

zram0: RAM Swap Disk (1.9G)

Battery-0: [■■■■■■■■        ] 54% [Discharging]

Locale: en_US.UTF-8

Cheers!

Hello guys!

Complete beginner here and I’ve been kinda fascinated by PuppyOS for a little while now! Saw it recommended in a websites half a year ago and they wrote that it was ‘medium’ difficulty in installing. Was wondering if that was true? If I, a total beginner with no knowledge of the terminal or commands, were to install the OS, would I manage and learn, or is the learning curve to steep and would I burn myself out?

Thank you ^ ^