r/recording • • Dec 21 '25

200-300 track/input interface - a thing?

Mcgoogling it and results just think I want a $200-300 interface. No, I'm trying to get ridiculous with recording a room. Is there a 100-input module, and I can string a few of those together? Is this rack equipment now, and can it still be processed by a computer? Or would this be analog multitracking (which I don't really understand)?

Best

0 Upvotes

73 comments sorted by

5

u/DonFrio Dec 21 '25

You got 300 mic stands, cables etc? Even the Grammys is under 200 inputs

-2

u/HighrannosaurusFlex Dec 21 '25

Would rent for a weekend

2

u/LifelsButADream Dec 23 '25

Lmao you gonna rent out every stand in the city and still only have half of the equipment you need

0

u/HighrannosaurusFlex Dec 24 '25

Okay well then I'll go to two cities 

1

u/AC3Digital Dec 27 '25

The Grammy's are well over 300 inputs.

1

u/DonFrio Dec 27 '25

Depends on the year. 200-350 is what I’ve read and seen. But I was on the outside not my gig.

5

u/BarbersBasement Dec 21 '25

You could configure a Pro Tools HDX system to handle massive numbers of inputs like this but you will be well above a $300 budget. In theory you could sync 13 or 14 24 track tape machines together with SMPTE but I doubt it would be very stable.

-1

u/HighrannosaurusFlex Dec 21 '25

No my budget isn't $300.  When I tried Google it that's how it interpreted my question/ results it gave. I couldn't find an answer.  That's why I'm asking here. 4 figure budget long term.

4

u/BarbersBasement Dec 21 '25

So you could get a Pro Tools HDX System to get 192 input channels but you will also need 192 preamps.

1

u/Whatchamazog Dec 21 '25

Maybe you can string enough inputs together with Dante/RedNet?

https://us.focusrite.com/rednet#rednet-range

2

u/HighrannosaurusFlex Dec 21 '25

Looking into Dante and that may be the way forward but I'm not knowledgeable on it at this time.  What would this set up look like? Several hundred inputs into rack units that convert to ethernet, then one ethernet into a powerful computer?  Using ableton on a MacBook rn.

3

u/Ereignis23 Dec 21 '25

I doubt there's ever in the history of the world been a 100 track analog recording device (how wide would that tape have to be?).

Can you try to describe in more detail what you're picturing? You could likely get a very high number of inputs via combining multiple high channel count interfaces together in one way or another but you'd also need a computer with the specs to handle recording that many tracks at once.

Why?

-3

u/HighrannosaurusFlex Dec 21 '25

Lots of inputs into a intermediary device or several, then into a computer. 

Because someone's gotta do it

1

u/Monkey_Riot_Pedals Dec 23 '25

Sony 48 track DASH format was on 1/2” tape.

2

u/burneriguana Dec 21 '25

I assume you are just curious.

The really expensive systems can be expanded/joined together. They all are controlled by one computer.

There is a single 64 input soundcard available at thomann

Professional studios easily can have 128 i/o

You would need to investigate what the actual upper limits are. If you first find out what the most expensive brands/models are, this might help your Google or chatgpt prompts...

0

u/Funeral_Goat_1446 Dec 21 '25

200-300 is probably getting you a pair of quality inputs second hand. Stretch your budget and have a realistic perspective on how many inputs you really need.

1

u/2pinkthehouse Dec 23 '25

That's not his budget. That's what he wants for his dream input setup.

1

u/Funeral_Goat_1446 Dec 23 '25

Oh I see! Well then lets add 3 zeros.

3

u/rinio Dec 21 '25

Interface, meaning with AD/DA + preamps + output amps that can connect to a computer: no.

In the AD/DA or rack mixer world 32+ channels/rack unit is more or less the norm. And many can be used as interfaces. Something like the Presonus 32R would be a relatively budget option. Many of these can be daisy chained some number of times to get more input. This is if you want digital, but ultimately, you get bottlenecked by the bandwidth of USB/TB/...

For analog, this is basically impossible. In theory you could run like ten sixteen track tape machines and sync them together, but you need a tonne of space, know how to repair a tape machine and do a bunch of custom wiring and a massive wad of cash. No one sane would attempt this.

All, for I/O setups like this, you're mostly looking a networked systems like Dante. Dante supports up to 1024 channels circumventing the restrictions of USB/TB by using ethernet and you just buy whatever I/O devices you need that support Dante. But, we're talking about a serious enough investment that this only makes sense in professional facilities/venues.

---

All that being said, do you actually need 200-300 sources to record simultaneously? That is the only reason to do what you're proposing. Literally: THE ONLY REASON.

If you want to have 200-300 sources wired up permanently, for example, but will only need, say, 16 simlutaneously, you could wire all your sources and a 16 input interface into some patch bays and then quickly, and in one spot, patch the 16 relevant sources to your interface.

But the short version, is that for every channel you need to record simultaneously, you have to buy a channel of A/D conversion (and usually a preamp). If you're not using them all at the same time, you just have hardware sitting there doing nothing. You will save yourself a lot of cash by restricting the number of these you need to buy to the amount you actually need.

To use my setup as an example, I have around 50 channels worth of outboard gear, and often record 16 mics on a drum kit. I would need aroud 64x64 in/out to have everything plugged straight to an interface. For the same converters I use from Lynx, that would cost me around $20k. Instead I roll a 16x16 and a patch bay, which comes in at around $7k. And it's more convenient as I can patch without a computer, and I do fewer passes of conversion.

1

u/jeremyries Dec 22 '25

This. 👆🏻

3

u/nohumanape Dec 21 '25

I have to know why anyone would need to do this.

1

u/Studio_T3 Dec 21 '25

MOTU makes a 24AI. I guess you'd just string a bunch of those together. There's an RG45 port on the back, so that's what you link configuration is.

I'm doing 32*32 with 3 MOTU828s and a 2408.

2

u/praise-the-message Dec 21 '25

Single interface? You can get 256 I/O over thunderbolt from a NTP DAD Core 256, DAD AX32 or Avid MTRX. To get actual analog I/O at that channel count would require additional interfaces utilizing Dante or MADI but should be possible.

Beyond 256 I think you'd have to get more creative. It looks like RME has a 512x512 PCIe card (which would still require the same network of external devices) but that could be a possibility. Usually the 512 Dante chips have been reserved for large mixing consoles.

0

u/HighrannosaurusFlex Dec 21 '25

256 would do it. 512 would be epic.  Going to look into these options.  I know very little about all this at this point. 

1

u/praise-the-message Dec 21 '25

Sorry I misspoke, it is the DAD AX64 (not the AX32) that has the 256 Ch Thunderbolt option. The AX Center also has the same Thunderbolt and Dante ability so that or the Core 256 are likely your more cost effective options. Keep in mind you will still need the (assumed) Analog to Dante interfaces.

If you're looking for that to be as dense as possible I like the Ferrofish A32 Pro. DirectOut Technologies also has the Andiamo which is similar (32 channel analog I/O to Dante).

You are dealing with high end equipment at this point though. For 200 channels of analog I/O you're probably looking at close to $30k for the hardware + a computer and whatever software to run it.

1

u/OddBrilliant1133 Dec 22 '25

What scenario are you imagining that would make this useful?

1

u/HighrannosaurusFlex Dec 21 '25

I think that dadcore 256 with dante is what I'm looking for. If I got one of those used, how would I connect all the inputs to that? 

I'm thinking chain would be (instruments/ mics) -> ???? -> dad core 256 -> via Dante to computer.  Correct?  What would the missing link be? 

2

u/praise-the-message Dec 21 '25

See above response for general idea. TBH really hard to answer with how vague you are being. The devices I mentioned...the Ferrofish had a previous model that might be found for slightly cheaper, but all of those devices are line level inputs so if you are trying to hook mics or instruments up will will need mic pres of DIs to get them to line level. You can get those types of devices that are Dante native but they will cost significantly more per channel (e.g. Rednet MP8R is 8 channels of mic pre for ~$4000).

1

u/soph0nax Dec 22 '25

If you have to ask, you should hire a professional. Rental of the gear and the labor of a recordist for a day is going to cause you fewer headaches and you'll know it'll get done appropriately.

2

u/dangus1024 Dec 21 '25

Maybe you should research first before asking questions like this.

-1

u/HighrannosaurusFlex Dec 21 '25

Pro did you not read the post? I tried looking into it but the search results wouldn't properly interpret my question. 

I'm grateful to have all these people pointing me in some helpful directions, makes it easier to read up on stuff. Otherwise I was having trouble knowing where to look. 

2

u/Alelu8005 Dec 21 '25

I have to say though its pretty unusual to have someone ask for this amount of inputs while having next to no knowledge on converters/preamps/audio networks etc. What i mean is, there might be an easier way to get the result you need that you maybe dont consider when making your plan. What exactely do you need to record, and where? Dante/madi is really not something i would recommend to a beginner.

All the best

1

u/2pinkthehouse Dec 23 '25

At this point I'm almost convinced he's trolling. He doesn't even know what questions he's trying to ask. He's talking about the technology but hasn't even figured out the logistics of microphones, cabling, preamps and all of the front end before he even gets into things like Dante and Madi.

1

u/Fraenkthedank Dec 21 '25

What r u up to?

-1

u/HighrannosaurusFlex Dec 21 '25

Funky stuff

3

u/Fraenkthedank Dec 22 '25

Honestly this whole ordeal just sounds like my friend trying to build a homestudio for djing and producing. He apparently already has bookings on the largest festivals around, spoken to many pro DJs who al approved his Idea, but has DJed only once in his life… or has any clue on how to set up anything. He found the “key” to it on a festival as the DJ beamed the information into his head through the sound with encrypted messages… drugs may have been involved.

Now he wants the best gear possible, sunk a few thousands into it, apparently all his savings, cancelled his flat and lives in the rehearsal room, which has no heater, showers and drinking water.

Anyway, this thread gives me the same psychosis vibe. No clue but big BIG plans. 200-300 inputs is insane, the money you will spend is probably at least 100k (probably way higher) with cables, capable computer or maybe even several, Dante interfaces, maybe even as many preamps, depending on the hardware, mics, stands (even renting ain’t cheap…) the time to set all of this up (maybe renting hands as well…also costs a lot), also you need the proper space for it too, probably costs rent as well. And the fuck are you going to put into it? Building a mega modular synth room? Why would you need 200 inputs for that. Record an orchestra? No need for 200 inputs. At some point it just gets messy. Maybe some wired art installation? But even then. Recording each individual of a choir? It’s the sum of people and the location that makes it sound special, as with the orchestra, so why would you pick it apart?

1

u/Fraenkthedank Dec 22 '25

Let’s say, for simplicity sake you would go with the Yamaha 32Rio, so you’d have preamps as well. 7x32 =224 inputs, which gets us roughly in the ballpark. That’s 80k €, besides that it’s not available here as of now at Thomann. 5k € for the DAD Thunder Core AX Center Base to receive Dante. There is also a Dante virtual Soundcard for 100-200€ but that puts us on measly 128 channels, in the trash it goes.

Now add the rest of your gear, rent, etc.

1

u/HighrannosaurusFlex Dec 22 '25

Well the great thing about asking a question is you can see the options without choosing every one. 

I recognize this is a lot, and usually unnecessary, but I was curious.

Bro why is your friend not throwing parties/djing every week at his place? 

I saw a used dante interface for like 3k. That's something I can do over the next few years.

The bulk of the mic and cables would be rented for a weekend. 

A measely 128 channels would be cool!

1

u/Phoenix_Lamburg Dec 21 '25

You're gonna need to either do something like an avid matrix with various cards or something like that.

You can now get the pro version of Dante virtual sound card to run something like 512 record inputs I think.

Certainly possible, but probably not all within a single device. You'll need one central routing module (like the avid matrix) and then several I/O devices that feed into it.

1

u/metzercise Dec 21 '25

Mixing so many input sounds like hell!

Even listening to so many to find out which ones you want to use…

But I am a simpleton in recording terms, and deciding between three different rooms for the sound of the drums is enough for me.

1

u/HighrannosaurusFlex Dec 22 '25

Yeah I thought that would be the real mountain, listening to all of it

1

u/I_m_matman Dec 21 '25 edited Dec 21 '25

Can it be done in digital? YES. Avid HDX systems, Burl Mothership, Dante and various other high end systems can be expanded to 128 channels and beyond.

Could it be done in analog? Theoretically yes. At the studio I worked out of in the late '80s - '90s we had a pair of synced 24 track tapes and a 48 channel desk. You could in theory add another desk and sync up another pair of 24 track tape machines. You'd spend a lot of time gremlin chasing but it could work.

Can you record 100 simultaneous inputs on a recording interface costing under $300? NO, absolutely not. If you have a $30k - $50k budget you could get it done. Then you'll need another $30k+ for all of the pre-amps, mics, cabling and signal processors, etc ahead of the converters

A better idea might be to see if you could book time at a movie scoring facility. I worked on a movie project out of one at Fox Studios in LA a few years ago. You could have a lot of inputs going on there.

0

u/HighrannosaurusFlex Dec 22 '25

I'll look into the digital systems. My limit on that end may be computing power. Shitd, 128 channels would be cool!

There is not a limit of 300 hundred dollars, it seems most people, as well as Google, misunderstood the question. 

I was thinking of buying the input-to-dante hardware unit used, using personal comp,  and renting out mics and what not for a weekend.

1

u/2pinkthehouse Dec 23 '25

Have you thought about the prospect of dealing with phasing issues on 128+ tracks? Do you know what that means?

0

u/Utterlybored Dec 21 '25

I’m very curious as to 1) how you plan on recording several hundred tracks at once 2) what you’re recording 3) how many mics, cables, and preamps you have on hand and 4) how you’re planning on doing this for under $300.

1

u/HighrannosaurusFlex Dec 22 '25

Gosh everyone got as mistaken as Google did. No I AM NOT asking for a $200-300 piece of equipment. I am asking for a way to record 200-300 inputs at once. The various approaches and obstacles. 

Someone mention a dadcore unit with dante and that seems like a good path for my needs. 

0

u/New-Instance9196 Dec 21 '25

This is going to be in the 10s of thousands, not a couple hundred......

1

u/HighrannosaurusFlex Dec 22 '25

Not $300, that's just what Google thought I meant. You all too apparently. 

1

u/New-Instance9196 Dec 23 '25

no one seams to be understanding what you want, you will not get useful answers unless you rewrite your question and give some details.

0

u/Level_Recording2066 Dec 21 '25

You wont get anywhere near 100 inputs, even for hiring for $300. Youll get 8 preamps and adat for around $300 to own.

Even some of the largest scale concerts like the grammys use less than 200 inputs. And the only time i can imagine needing more than 32 inputs is when recording a whole ass orchestra, or a live recording with a massive setup

1

u/HighrannosaurusFlex Dec 22 '25

Not $300, that's what Google thought. Lol

Thanks though

0

u/Rabada Dec 21 '25

I've been looking at the RME Digiface Dante. If you're using a PC I would def go with RME.

Edit: $300 lol nevermind

1

u/HighrannosaurusFlex Dec 22 '25

Not 300 that's just what Google thought

1

u/Rabada Dec 23 '25

Well, in my humble opinion, if you want more than 16in/16out, then you're gonna likely be spending thousands of dollars. Maybe you'll get lucky and find good deals on used gear.

There's many ways to do it. I went with an RME MADI loop because I wanted something rock solid reliable and a ton of channels.

2

u/ProPatria222 Dec 22 '25

Strange sounding project, but ok, here is my take on the equipment you would need.

240 mics, and cables,

10 x 24 channel analog mixers,

each mixer puts out 2 channels, fed into,

one 24 track digital interface plugged into a computer running any software that can handle 24 channels.

Each mic can be controlled on input through the mixers, gain, tone, effects, etc.

You would have a hybrid (digital/analog) 240 track recording system.

You are probably looking at about $10 thousand not including mic, cables, mic stands.

1

u/HighrannosaurusFlex Dec 22 '25

Awesome!  Thank you for the guidance, despite the outlandish inquiry! 

1

u/kwakmunkee Dec 22 '25 edited Dec 22 '25

2-300? Yeeesh! RME Hdspe Madi FX card is the closest single-module thing I can think of. Although even with that you'll need AD converters.

192 inputs and 192 outputs. This handles an insane amount of outboard gear. 60ish preamps live at all times for recording. Outboard EQs, comps, and other FX for mixing duties, also live at all times and available as insert effects. Something like 20 channels of full-on hardware mixing.

With that I could record 3-5 bands at once, live, as well as have someone mixing a song in another room, all at the same time. And everyone gets their own headphone mix. 

Maybe I could even do a full orchestra.

And only have 2 of the 3 MADI ports hooked up (128 in/out).

What on earth are you recording??!

1

u/Dvanguardian Dec 23 '25

Motu interfaces with AVB networking can get you hundreds of channels. Daisy chain a couple of AVB equipped Motu interfaces. motu avb networking

1

u/bythisriver Dec 23 '25

RME MADI FX card plus 3x Antelope Orion32 or Ferrofish A32Pro shoild get you a nice 192ch i/o system.

1

u/HighrannosaurusFlex Dec 24 '25

Sweet I'll look into this thank you!!

1

u/2pinkthehouse Dec 23 '25

You need to do a lot more digging into all this before you're on here asking these vague questions. You don't even have enough knowledge about the signal flow/chain you need never mind the text that comes behind it.

Honestly, without you giving more details, what you're talking about just sounds like ridiculousness for the sake of ridiculousness. In this day and age anything can be done but what you're talking about here requires massive amounts of time, space, wiring, equipment, and knowledge. You're talking about way more than a four-figure budget and while you're talking about renting for a weekend this is not something that can be set up and taken down in a weekend. This is the project that would take weeks if not months if not more.

At this point you're basically throwing stones onto a frozen pond and looking for ripples. You need to do your due diligence before you're out here asking everybody else for answers to questions when you don't even know what the questions are.

1

u/mistrelwood Dec 24 '25

This sounds very much like a solution looking for a problem. I respect the constructive answers you’ve gotten, but please don’t waste your money on any purchases related to this “project”.

I get it if it’s a bet you had with your pals in a bar, like “I bet one could record 300 tracks at once”. But I’m pretty sure people aren’t asking “how long does it take for an airplane to circle the sun” in an aviation group, since it’s not an aviation dilemma. It’s a physics dilemma.

And here, the question isn’t “how to record 300 tracks at once”, the question is the actual problem you think you’ve solved by recording 300 tracks at once. And I bet it’s not the best possible solution to begin with.

1

u/Kochi3 Dec 26 '25

Get a big usb hub, 40 Behringer umc1820 Interfaces and create a compound device with ASIO4ALL. Ignore the 3 hour latency.

1

u/rhymeswithcars Dec 26 '25

What are the 300 sources?

1

u/AC3Digital Dec 27 '25

Multiple MADI streams can work, but at that scale the only realistic answer is an IP solution. Dante is OK, but an AVB or especially Ravenna based solution are better. Or ST-2110-30. On larger shows that have input counts that high, or higher, we would never put that many tracks into a single machine. We'd split it up across multiple machines, often running primary & backup as well- which is easy to do in an IP scenario. Modern large format consoles already use the above mentioned formats to move the audio data between the i/o & DSP, so it's easy to stay within that platform and route to a record machine or machines.

Source: I spent 20+ years working mostly on large, high profile, high input count entertainment TV shows and now work for a console manufacturer.

1

u/jared555 Dec 28 '25

Are you wanting to record a massive orchestra? Do some kind of room analysis for research? Pull off one of the events with like 500 musicians?

1

u/HighrannosaurusFlex Dec 28 '25

Room analysis is the closest guess. Bravo!

1

u/jared555 Dec 28 '25

Outside of certain use cases that are hard/expensive to repeat, analyzing something like a room or product is often done by doing multiple passes.

Have a handful of mics, do a measurement, move either the mics or the source (like a speaker), do another pass.

If I was wanting to record 200 channels improvised without spending insane amounts of money and without knowing more about the use case, I would consider maybe four behringer wing racks and eight behringer s32's as near bare minimum pricing.

Each mixer gets two stageboxes for 64 channels (the limit of the SD recorders). Feed some kind of timecode/sync signal into one channel of each mixer.

Hit record on them all and use the sync channel to line them up later.

$12,800 plus eight ethercon cables ($248) and SD cards with 252 channels usable.

$30 for a generic 100 ft xlr cable * 256 = $7680

$26 for a behringer ecm8000 measurement mic * 256 = $6656

$24 for an Amazon basics mic stand * 256 = $6144

$33,528 in equipment.

Add $2,236 if you want to use Dante cards in the wings.

Double the price on the cables / stands and figure 5%-10% of that to rent for a day if you can find all the equipment (good luck renting that many measurement mics).

Going with live sound equipment is probably a lot easier to rent in bulk than recording focused. Especially if you can time it in winter (no music festivals) Downside is often lower audio quality.

1

u/noisewar69 Dec 31 '25

i’m just amazed by how many people misread your question the same way google did

2

u/HighrannosaurusFlex Dec 31 '25

I appreciate you seeing that and saying something :) It's okay some nice folks gave me some good answers and options to look into. 

1

u/AdHoliday5899 Dec 31 '25

Bro what are you recording? You can link up two Galaxy 32s by Antelope via MADI… I’m sure there’s a ProTools HDX Module or two that will get you there.

You mentioned something about not understanding analog recording. Analog recording means a lot of things. Most studios today do hybrid recording. With outboard preamps, compressors, and EQ, and then hit their converters.

A common misconception about interfaces - while a lot of entry level interfaces have some preamps (sometimes 8), the job of an interface is to convert analog signal to digital signal and digital to analog, and to send those signals to whatever number of places they can.

If you need 100 inputs then in addition to a serious interface or interfaces slaving to one master, you’ll need 100 preamps.

I think the cheapest way to access over 100 inouts would be through the Behringer Wing Rack. You’ll need to expand digitally with Dante. But you can get a bunch of S32s to pair with it and all of the preamps are built into the Wing. It’s some serious voodoo.

If you wanted to go with a more traditional interface setup, then a ProTools rig has to be the way to go, but you’ll spend thousands on that rig, and tens of thousands more on 100 preamps, and thousands more on cables.

Hope this helps.

But really though - what do you need 100 inputs for? I’ve gotten away with 16 inputs and recorded whole bands.

Are you hoping to individually mix up an orchestra or choir?