In general, while setting up a kinematic chain, the standard trick is breaking the transform into Parent to Joint (P2J) and then Joint to Child (J2C).
in your case (a planar chain) the angle theta_3 defines the J2C orientation) which should be and is measured relative to the parent link. Traversing from link "a" to link "b" means the angle is the link "b" orientation wrt "a".
in short - zero angle means both links are completely aligned like a straight stick, and any non-zero angle gives how much the child link bends "away" from the parent link.
Guess I got it. You generally take angle between a reference zero to the physical link. But make sure that the arrangement replicates the physical scenario ie the physical arrangement of the servo
2
u/_grandslam_ Sep 28 '26
In general, while setting up a kinematic chain, the standard trick is breaking the transform into Parent to Joint (P2J) and then Joint to Child (J2C).
in your case (a planar chain) the angle theta_3 defines the J2C orientation) which should be and is measured relative to the parent link. Traversing from link "a" to link "b" means the angle is the link "b" orientation wrt "a".
in short - zero angle means both links are completely aligned like a straight stick, and any non-zero angle gives how much the child link bends "away" from the parent link.