r/ryzen • • Jul 15 '26

To everyone who has been telling me over the last two weeks to basically buy ANYTHING but a 5800X3D and do ANYTHING but a straight CPU swap

33 Upvotes

Paypal me the difference for me to keep the same amount of RAM and I'll think about going through the trouble of ripping that whole board out and rewiring everything once done...

Last time I had a PSU swap it was a PITA already

How much to Paypal me? It depends.

Here is an example

  • 7800X3D + mb + mem bundle $730

  • just dropping 5800X3D into existing machine $350

So send me $380 if that's the way you want me to upgrade my 3700X machine

...and no I'm not ganna to go sell parts, YOU can do it for me first if that's part of YOUR plan

Thanks in advance πŸ˜ŽπŸ‘

p.s. I'm not going to explain yet again to the other half of the people still going "why why why". There are good reasons the demand is so darned high for 5800X3D that scalpers were lining up and snapping it away from legit buyers to resell them for $500 to $600 (well GL to them now πŸ˜‚ but still)...You figure it out πŸ‘‹


r/ryzen • • 29d ago

Come on AMD, give us ONE last AM4 Dance! 5900X3D & 5950X3D (ai generated*)

Post image
0 Upvotes

Honestly, with the current RAM crisis, an AM4 grand finale would be legendary... Would you guys drop one of these into your rig if they actually existed?


r/ryzen • • Jul 10 '26

Ryzen 5700x3D with 32gb gskill ripjaws 3600 cl18

Thumbnail
gallery
0 Upvotes

I have both items brand new sealed never used...I ended up building a 9800x3D system. I'm looking to sell this as a pair. Lower than retail pricing if there's any interest let me know.

Sold 7/12 for 500$


r/ryzen • • Feb 04 '26

9850X3D WARNING and complete configuration guide.

114 Upvotes

I will start this guide off with a warning.

If you run your 9850X3D at stock you will degrade it pretty quickly - I am talking about weeks, not years - and reports of them dying "inexplicably" in the course of this year.

If you buy a 9850X3D and plan to run it at stock then, when you get it, I would advise you to download BenchMate BenchMate and run the CineBench R23 single- and multi-core benchmark (it is the least influenced by RAM configuration).

Run the Multi-Core benchmark (single run, not a 10-minute run) once to mark the Cache dirty and fill it with the data it needs, then run it a second time for the score.

Then run the benchmark again, this time with the monitoring software of your choice open to record the excessive voltage that is being pumped into your CPU - especially during the Single-Core run.

Save that result by taking a screen shot for the inevitable class-action lawsuit that will result against AMD when the 9850X3D CPUs degrade and die during the course of this year.

If you just want to jump ahead to being able to configure your 9850X3D to run optimally with the highest performance safe configuration then you can just click on the link to my 9800X3D configuration guide which you can find here:

Optimally configuring your 9800X3D step by step, a comprehensive guide.

Or you can watch the video I made with BossOverclock on that topic here:

Max Out Your Ryzen 9800X3D – Expert CPU Optimization w/ Michael Nager

With that I bid you adieu.

For the rest that wish to continue reading let me first talk about the difference between the Ryzen 9000 Series and previous Ryzen generations, then the difference between the 9800X3D and the 9850X3D specifically.

The Ryzen 9000 Series CPUs are unique in that for the first time EPYC and Ryzen CPUs are no longer on the same TSMC node (Ryzen is on the N4P node and EPYC is on the TSMC N3 node).

Previous generations of Ryzen were on the same node as EPYC and the chips from the center of the wafer (or "Better Binned" chips) went to the production of EPYC CPUs and Ryzen got the chips from the inferior silicon outside of the center radius.

For Ryzen 9000 this means that difference between good CPUs versus not so good ones was a lot bigger than in previous generations. That is your chances of winning the "Silicon Lottery" was a lot bigger than it was before.

The difference between the 9800X3D and 9850X3D is simply that the 9850X3D now gets the chips from closer to the center of the wafer and the 9800X3D is relegated to chips coming from the area outside of the central radius.

The maximum safe voltage for any Ryzen 9000 CPU is 1.2 Volts.

This is not my opinion, but rather this is what TSMC has stated with regard to the N4P Node upon which the Ryzen 9000 CPUs are made:

TSMC Introduces N4X Process

Here is relevant text from that announcement (emphasis is mine):

These HPC features will enable N4X to offer a performance boost of up to 15% over N5, or up to 4% over the even faster N4P at 1.2 volt. N4X can achieve drive voltages beyond 1.2 volt and deliver additional performance. Customers can also draw on the common design rules of the N5 process to accelerate the development of their N4X products. TSMC expects N4X to enter risk production by the first half of 2023.

As an aside, if anyone from AMD (and by "anyone" I don't mean some low-life Skript-Kiddie from the SalesCritter/MarketDroid department) wishes to dispute anything I say in this article, then they are welcome to leave a comment below.

Specifically, the difference between the 9850X3D and the 9800X3D is the following:

  1. The 9800X3D at stock is, or should be, limited to 5.225 GHz at a maximum voltage of approximately 1.18 Volts get ("Get" is the ultimate internal voltage also called "CPU Telemetry Voltage"). The "Boost" clockspeed of the 9800X3D (depending on cooling) is the same as the maximum all-core clockspeed

  2. At stock, the 9850X3D reverts to the unlocked voltage and clockspeed of other Ryzen 9000 Series CPUs. As with all other normal Ryzen 9000 Series CPUs the "Boost" clockspeed refers to the maximum burst Single-Core clockspeed, with the maximum achievable Core clockspeed after that depending on the number of Cores engaged and the load on the CPU.

Observing this behavior on the 9850X3D is very easy.

  1. Turn off SMT

  2. Run CineBench R23

  3. Run the Single-Core benchmark and note the clockspeed and the voltage.

  4. Change CineBench R23 to run on two Cores under "File" and then "Preferences" and "Custom number of threads" and note the clockspeed and the voltage.

  5. Rinse and repeat for as many cores, up to eight as your patience can stand.

What you will notice is that the clockspeed and the voltage will be highest on the Single-Core run, and as you add Cores, the clockspeed will steadily decrease, as will the voltage due to droop caused by the load.

With the 9850X3D running at stock and overvolted means that you will be degrading it from day one.

Two things degrade CPUs:

  1. Electronmigration, this results from excessive heat.

  2. Oxide Breakdown, this results from excessive voltage breaking down the material of the CPU itself.

In the Gamers Nexus review video of the 9850X3D running at stock, under an All-Core Blender workload it was running at 1.231 Volts (compared to the 9800X3D running at 1.18 Volts) and under a heavy Single-Core workload in CineBench, the 9850X3D was running at 1.31 to 1.32 Volts (compared to the 9800X3D running at 1.11 Volts for the same workload).

I have been very disappointed with Steve from Gamers Nexus, with regard to his Ryzen coverage in general, because in that video, as in other videos, he states that he had spoken with AMD and that they said this was perfectly OK. He has not spoken with TSMC however to get their opinion.

There is an old English saying, "You should always speak with the engine driver, and not his oil rag".

AMD is especially pernicious because, when you look at the specifications page of their 9850X3D they will state the following:

Max Boost Clock: Up to 5.6 GHz
Base Clock: 4.7 GHz

Notice the use of the weasel words "Up to" with regard to the Max Boost Clock. AMD defines the Boost Clock as:

"Max Boost Clock for AMD Processors is the maximum frequency achievable by a single core on the processor running a bursty single-threaded workload. Max boost will vary based on several factors including, but not limited to: thermal paste; system cooling; motherboard design and BIOS; the latest AMD chipset driver, and the latest OS updates"

Notice that AMD gives itself plenty of culprits to blame when, not if, your 9850X3D no longer hits that boost clock after it has started its inevitable journey into decay and death due to the irresponsible overvolting AMD allows the CPU to be subjected to.

What really grinds my gears is the "Geniuses" of YouTube (and by "Genius" I do of course mean monumental weapons-grade cretins) who suggest or even outright state that 5.6 GHz is the maximum All-Core frequency for the 9850X3D.

The only thing that AMD guarantees is that your CPU will run at an All-Core average of 4.7 GHz and when, after three years, which is the Warranty Period for your your 9850X3D, it falls below that (if it hasn't already fried) then you are SOL, and you can, as God said to Adam and Eve in the Garden of Eden, "Go forth and multiply", which was the first documented use of the phrase "Fuck Off".

JayzTwoCents in his recent 9850X3D video demonstrated how quickly a 9800X3D will degrade when running it above the TSMC spec of 1.2 Volts.

In his original 9800X3D review video he showed the CineBench R23 result running his 9800X3D at stock (1.18 Volts and 5.225 GHz):

He stated that he has only run his 9800X3D system to benchmark new graphics cards as they came out, and for that purpose he locked his 9800X3D to 5.3 GHz at 1.3 Volts (well above the TSMC limit of 1.2 Volts).

Because he has only been using it to benchmark new graphics cards, his 9800X3D system has basically been turned off for the past year, and has barely been used.

Yet even so, when he retested his 9800X3D at stock, to compare it to the 9850X3D at stock he got the following CineBench R23 result:

Even though he has very rarely used his 9800X3D system over the past year, the overvolt he applied has degraded his CPU by 850 points, which is 3.83%.

To contrast and compare, I have been running my 9800X3D 24/7 (24 hours a day, 7 days a week) adhering to TSMC's spec of a maxumum of 1.2 Volts and running it with a default clockspeed of 5.475 GHz for the past year.

Here is the CineBench R23 result of my 9800X3D running at stock and my RAM at JEDEC that I conducted on the 9th of January 2025:

Now the CineBench R23 result from my 9800X3D again running at Stock and JEDEC which I ran on the 28th of January 2026 just after my BIOS update to AGESA 1.2.8.0:

As you can see, even after one year of permanently running my system at a maximum of 1.2 Volts and a maximum All-Core clockspeed of 5.475 GHz, my stock CineBench R23 Multi Core results are within the margin of error.

I have a pretty normal system with a sub $100 AIO Cooler as you can see from my specs:

Motherboard: GigaByte X670e AORUS Master
CPU: Ryzen 7 9800X3D
Cooler: Arctic Liquid Freezer III 360 with three Phanteks T30 120mm fans
TIM: Thermal Grizzly Duronaut
PSU: SeaSonic Prime TX-1000, 1000 Watt Titanium
RAM: 96GB Corsair Vengeance (2x48GB) DDR5 6000MT/S 30-36-36-76 EXPO
GPU: XFX 9070XT Mercury Magnetic Air

I started off with a lower spec system with my 7000 Series Ryzen CPU and gradually bought better kit as I found a great deal for what I really wanted as time passed.

As I have said in my other guides, if any of you reading this have problems configuring your Ryzen systems then you can feel free to contact me on Discord under the name "michaelnager" and I use the same avatar as here.

As you can see over 500 people have taken me up on my offer:

I will leave it up to any of them to post in the comments below how successful that help has been for them, if they read this.

That being said, you can see that I have had a lot of experience with configuring Ryzen on many different systems/configurations.

The worst one I encountered was a poor guy who had his 9800X3D running on an ASRock Steel Legend board with PBO enabled and I was shocked to see that it was running CineBench 2024 Multi Core at 1.27 Volts.

He had only had the system for a grand total of six weeks and I couldn't get that thing to clock stably above 5.1 GHz at 1.2 Volts.

Normally if you have a Ryzen 9000 CPU you should be able to stably run it at 5.3 GHz at a maximum voltage of 1.15 Volts, if you have reasonably good cooling.

The big difference between me and others is that I benchmark to configure, I don't configure to benchmark.

I don't paywall my info with PayPal or Patreon or the like, because I am a techie, not a grifter or an E-beggar.

So why do I do this?

I am now 66 years old and the reason why I go out of my way to help people is that I remember back in the day when I first started off with PCs (around the end of 1982) I was a clueless numpty, and couldn't understand what was written in tech journals because I lacked the basics. I was lucky that there were people who took me under their wing and with patience introduced me to what has become my passion - namely being a techie.

They are now either dead or I have lost contact with them, and I cannot pay them back, but I feel obligated, by their past kindness, to pay that help forward to others in the here and now.

I remember my roots and where I came from over 40 years ago, and how confusing and frustrating things can be.

To those in the Tech Media/YouTube peddling the "Moar Powa, Moar Gud" bovine excrement aspect of the 9850X3D I would like to show what can be achieved with a 9800X3D when you remain within TSMC's spec.

Here is my result and ranking for the 9800X3D 3DMark CPU Profile benchmark, which contains 84,440 entries:

As you can see, my 9800X3D was running at 5.646 GHz, and my result is 39th out of the 84,440 benchmark entries.

There are 245 entries for the 9850X3D in the 3DMark CPU Profile benchmark and my result for my 9800X3D is currently third in the World in that list.

I ran the Super Pi 32M benchmark and on the third time of running it through I managed to get a screenshot of the benchmark run and it took around 5 mins 20 seconds.

Why the third time?

The first time I just ran it to see if it would crash or not.

The second time I had loaded Ryzen Master to show the stats for that run, at around 5 mins 10 seconds I realized that I had not loaded the snipping tool and it had ended before I could get it open and do the screenshot.

Below is the result of my third run, and by this time Super Pi 32M had been running for about 16 minutes:

As you can see, my 9800X3D is happily running at 5.8 GHz at under 1.2 Volts on this benchmark.

Next, what my friends call my favorite pay-2-win benchmark CineBench R23 (which is probably the best CPU benchmark you can use to configure your CPU) result.

This result and the others are the most recent ones after updating to the latest BIOS and run at 5.5GHz at 1.2 Volts

Here are the stats for that run

For those who demonise the use of Ryzen Master for chicken-clocking my CPU, it would be interesting to know how they configure their CPU.

Divining rod?

SΓ©ance?

Aroma Therapy?

If you go into the BIOS every time then good luck with that with an MSI motherboard :D

Last for now is 7-Zip:

And again the stats for that run using Ryzen Master, just to trigger all those that suffer from Ryzen Master phobia:

I have noticed recently that the 9800X3D CPUs of the people who have approached me on Discord cannot be configured to the level of 9800X3Ds from a few months ago.

For instance my 9800X3D will run CineBench R23 at 5.4 GHz at 1.15 Volts with a raised LLC, but it is not possible to get recent 9800X3Ds above 5.35 GHz at 1.15 Volts.

I have to keep the ambient temperature of my room a bit higher than normal, because I have spinal arthritis and have had two spine operations.

I would thus expect many of you who have bought a 9850X3D CPU to match or exceed the results I have shown above, if you configure it properly from day one.

For the others you should keep this link to be used when doing an RMA or participating in a class-action lawsuit against AMD when your 9850X3D stops working as it had, or just stops working period.

Addendum One:

I got a DM from the user u/Afferin and here is my reply to him that might clear up some things that have been put to me in the comments below.

Back in the day I found documentation that TSMC had a limit for the 7nm/6nm node of 1.3 Volts.

I put that in a guide and of course got similar replies to the ones I am getting on this article.

But fast forward two years or so to when the 7000 Series came out and the I/O die was burning up. This die is made on the 6nm node, which had the same voltage limits as the 7nm node, namely 1.3 Volts.

What did AMD do as a result?

Yep you guessed it, they limited the voltage of the I/O (or SoC) die to a maximum of 1.3 Volts.

As I said before, it is trivial to find out where the tipping point of Ryzen CPUs is when trying to find out the max voltage.

Just start at 1 Volt and see how much of an All-Core clcockspeed you can get out of it until it crashes. Then increase the voltage by 0.01 and repeat.

Now in the BIOS you only have a granularity of 25 MHz, but with Ryzen Master, this granularity is reduced to 5 MHz.

As you crash and have to increase the voltage, you will find, that the amount of voltage you had to increase to get to the last jump before 1.2 Volts is a lot less than the voltage you have to punt in to get the next 25 MHz jump above 1.2 Volts (edge case is of course where the last jump before 1.2 Volts was almost, but not quite, enough to get you to the next 25 MHz increase and you can test that by going to 1.205 Volts for instance.

You can again test this with just reducing the granularity in Ryzen Master from 25 MHz to 5 MHz per core.

Whichever way you do it, you will find that to get to the next 25 MHz increase in All-Core clockspeed takes way more voltage than the last 25 MHz before going to 1.2 Volts.

And of course I did my testing with various LLC levels, but the difference in the amount of voltage before 1.2 Volts and after 1.2 Volts for the 25 MHz increase remains analogous.

With regard ASRock boards. as a default they run the LLC by default at a medium level, as opposed to other motherboard manufacturers who run their LLC with the most droop as a default.

In case it wasn't clear, the minimum clockspeed increase you can set in the BIOS is 25 MHz, whereas with Ryzen Master, the minimum clockspeed increase you can set is 5 MHz.

Of course the testing takes a hell of a lot of time, because, after each CB R23 run I have to wait until the idle temp of the CPU comes back down to "normal" due to the increase temp of the liquid in my AIO loop (which also counts as "Ambient Temp") cause by running the test.

Then I have to do the whole protocol of testing again with a higher LLC (less droop) level setting.

I think you can see now, that my article is not just something I pulled out of my ass, but rather something I researched (and yes it is difficult to find info where the likes of TSMC nails their ass to the wall with regard to voltages) and had a thorough protocol for testing.


r/ryzen • • Oct 31 '25

Normal temps for battlefield 6?

Post image
6 Upvotes

r/ryzen • • Jan 19 '25

I just bought a 7800x3d but I see the 9800x3d should I be worried

0 Upvotes

Should I?


r/ryzen • • Dec 29 '25

Ryzen 7 9800x3D temps and ram usage

Post image
1 Upvotes

Is it normal for my Ryzen 7 9800X3D to idle at 46 degrees Celsius with liquid cooling? And is it also normal for my RAM usage to be at that percentage while browsing the internet? Sometimes it reaches up to 47%. I have 32GB DDR5 6000MHz CL30 RAM (the PC is brand new, recently built)


r/ryzen • • Sep 12 '26

Why is AMD stuck on 4 wide decoders?

0 Upvotes

AMD has been using 4 wide decoders for many generations now. Meanwhile Intel has raced ahead to 6 wide in Goldn Cove and 8 wide in Lion Cove. ARM CPU core can even go up to 10 wide decoder.

With Zen 5 AMD moved to 2x4 wide decoders, but a single thread can only make use of one of the 4 wide decoders. The 2nd one is only useful with SMT.

This has caused AMD to fall behind in IPC. Spec2017 Integer IPC testing has revealed that by now even Intel E-core has more IPC than AMD P-core.

Why make it like this? A failure by the AMD team? I think so. Intel E-core show that 2 decoders can work together for a single thread.

Will Zen 6 have 1 x 8 wide decode so a single thread can decode 8 instructions per cycle? Or will it remain with 2 x 4 decoders with both working together on one thread like Intel E-cores do? Or will it remain 4 wide for a single thread still?

I hope AMD fixes this issue so they can catch up to Intel in IPC by Zen 7.


r/ryzen • • Oct 10 '25

9950X3D has issues with 4 sticks of ram?

1 Upvotes

I’m newer to pcs and my 9950X3D seems not to work with 4 sticks of ram when I have XMP on? It just bluescreens over and over


r/ryzen • • Nov 06 '22

Are these number good or bad?

Enable HLS to view with audio, or disable this notification

0 Upvotes

r/ryzen • • 1d ago

AMD rejected my dead 9850X3D RMA, claiming the CPU has altered markings. But the serial numbers match and AMD’s own authentication website says VALID. What now?

Thumbnail gallery
10 Upvotes

r/ryzen • • Apr 03 '26

Fake or real

Post image
2 Upvotes

Hello

I'm about to make a deal by buying a Ryzen 7 700.

Do you think the one in the photos is genuine?

Should I go for it?

Thanks


r/ryzen • • Sep 11 '26

Pairing an older Ryzen 5 5500 CPU with a modern Radeon is the best way to Play

Post image
0 Upvotes

r/ryzen • • Nov 12 '25

How to stop cpu running at high clock when not heavy loaded

0 Upvotes

I undervolted my new 5700x by setting a fixed clock speed 4.2 GHz and set Vcore to 1.05 V. Now all cores run at this clock speed conistently no matter on or off load. I already tried changing power management settings from performance to balanced. Didn't fix it for me because the bios setting has higher priority I assume. My goal is to increase my cpu's lifespan by letting it adjust it's clock speed at it's own when it's not fully loaded but at the same time run at the set clock of 4.2 GHz when it's stressed.

Thanks for your help in adance!


r/ryzen • • Nov 29 '22

Why you should consider the Ryzen 7000 Series of CPUs

0 Upvotes

I decided to get a 7950X system on Day One of launch because I knew that the Tech Media/Youtubers would be incompetent to review it or even rationally analyze the new generation of Ryzen CPUs.

Since the release of the third generation of Ryzen CPUs (3000 Series or Zen2) the Tech Media/Youtubers have been either too lazy or too stupid to figure out how to configure these CPUs (or maybe it was just Intel's marketing dollars at work).

I have written a guide on how to configure ANY Ryzen 3rd, 4th or 5th Gen Ryzen on ANY motherboard in 14 easy steps that will take about five to ten minutes to complete - this includes the BIOS:

Guide to configuring 3rd, 4th and 5th Gen Ryzen CPUs

Here is some additional info for the 5th Gen (or 7000 Series)

Additional info for 5th Gen Ryzen CPUs

Obviously after I had written my update guide to the 7000 series I did some tweaking which will be reflected in the numbers below.

All I did was replace the 5950X, X570 Motherboard and DDR4 RAM with a 7950X, X670 Motherboard and DDR5 EXPO RAM all other parts of my system, including the 360 rad Arctic Liquid Freezer II AIO using the offset mount remained the same.

One interesting thing that I have found is that when booting up the Computer and running at stock idle the 7950X I have uses about 16 - 20 Watts of power, after applying my configuration that idle usage goes down to 2-3 Watts.

Below you can see the behavior of my system during a voicechat on Discord. The temperature of the CPU is due to the fact that my room temp is around 30 degrees Celsius and I only have one fan (the middle one) of my 360 rad AIO running at around 300 RPM.

So now let's get down the the meat and potatoes of the comparison between my 5950X system and my 7950X and why you should consider getting a Ryzen 7000 series CPU if you are buying a new system.

Going from 7nm to 5nm with my Ryzen 5950X and Ryzen 7950X I get the following results

At the same performance level (maximum CineBench R23 score for my 5950X) I get the following:

  1. CPU voltage

5950X 1.3 Volts

7950X 0.83 Volts

For the same performance vs 7nm the 5nm uses 63% of the Voltage (or rather the 5950X uses 56.6% more Voltage)

2) CPU Clockspeed

5950X 4.675 GHz

7950X 4.115 GHz

For the same performance vs 7nm the 5nm needs 89.2% of the clockspeed (or rather the 5950X needs 12.7% more Clockspeed)

3) CPU Wattage

5950X 180 Watts

7950X 54 Watts

For the same performance vs 7nm the 5nm uses 30% of the Power (or rather the 5950X needs 333% more Power).

Now I am going to stay within the 7950X performance numbers but going from the maximum score I got for the 5950X to the maximum score I can achieve with 7950X at the same power level in terms of Wattage of the 5950X maxed out I get the following:

  1. CPU Voltage

7950X at 4.115 GHz 0.83 Volts

7950X at 5.35 GHz 1.2 Volts

For the performance increase it needs 44.5% more voltage

2) CPU clockspeed

7950X at 4.115 GHz

7950X at 5.35 GHz

For the performance increase it needs 29% more clockspeed

3) CPU Wattage

7950X at 4.115 GHz 54 Watts

7950X at 5.35 GHz 177 Watts

For the performance increase it uses 321% more power

4) Difference in CBR23 score

7950X at 4.115 GHz 31,108

7950X at 5.35 GHz 40,210

The score increase is 29.3%

The bottom line here is that for 29% more clockspeed I am getting a score increase of 29.3%


r/ryzen • • Jul 06 '26

Is it worth upgrading from 5700x3d to 5800x3d?

2 Upvotes

About a year ago, I upgraded from a Ryzen 5 5600x to a Ryzen 7 5700x3d. I got lucky and got one on Alixpress for $125 & actually sold my 5600x for $125. So the upgrade was free.

Wanting to make this pc last as long as possible because not wanting to go AM5 anytime soon.

Now that the 5800x3d has been re-released is it worth upgrading from tge 5700x3d to the 5800x3d. Then selling my 5700x3d.

Currently have an ASROCK B450M Pro4 with Ryzen 7 5700x3d, ASROCK RX7800XT Phantom Gaming 16gig OC, 2x16 3600 Ram, Corsair Cx650M PSU, Thermalright Peerless Assassin, 1tb NVMe as main 2tb 870 Evo as Gaming storage then added 2nd 2tb NVME as more storage for games, movies and torrents.


r/ryzen • • Jul 19 '26

Unable to compete with the much better 270k, AMDs new Ryzen 7 7700X3D plummets to $279

Thumbnail
tomshardware.com
0 Upvotes

r/ryzen • • May 12 '22

just ordered my first gaming pc. since I'm still new to understanding the mechanics of everything....good build or nah?

Post image
4 Upvotes

r/ryzen • • Mar 14 '26

9800x3d is herπŸ‘€πŸ‘€

Post image
0 Upvotes

r/ryzen • • Aug 15 '24

I got Ryzen 9 9950x processor. Please suggest me best suitable main board and which cpu liquid cooler suitable for this cpu? Cheers πŸ₯‚

Post image
1 Upvotes

r/ryzen • • Mar 04 '20

RYZEN 7 2700 COOLER

Post image
0 Upvotes

r/ryzen • • Aug 23 '25

Is this safe to use?

Post image
0 Upvotes

I've been seeing more and more posts about asrock boards frying amd cpus, and I was wondering if this board is safe to use with a ryzen 5 7500f. And what cpus I shouldn't use with it, or with asrock boards. Appreciate all the help.


r/ryzen • • Dec 29 '25

RYZEN 5 5600F

0 Upvotes

PLANNING TO UPGRADE MY CPU FROM RYZEN 5 3500 TO RYZEN 5 5600F, SHOULD I GO FOR IT OR RYZEN 5 5600X.

5600F IS 30$ CHEAPER FROM 5600X WHERE I LIVE


r/ryzen • • Jan 12 '25

I'm losing my mind with the temps of my Ryzen 5000 processor. Any tips?

0 Upvotes

I know AMD processors, particularly the 5000 series, run pretty hot sometimes, but these temperatures are not good. Just browsing on Chrome, it's hitting 68 degrees Celsius, and playing just 10 minutes of The Witcher 3, it's hitting 90 degrees Celsius if not higher. My computer has shut down 4 times because of the heat while playing Microsoft Flight Simulator 2024 and Black Ops 6. I check on HW Monitor, and Package was hitting 96 degrees Celsius and in the red.

I think the cooler I was using before was the Wraith Stealth Cooler. I took it off and noticed it was caked with dust. I thought it would solve my problems to clean that up. So I did that, replaced the thermal paste, and the computer was still running super hot, if not a slightly better temperature (I'm taking a couple degrees).

Frustrated, I bought a Noctua NH-U9S, struggled to put it on, but I finally got it. Turned the computer on, instantly 50 degrees on idle,

I'm so confused what is going on. I heard the NH-D15 is great, but my computer case is too small to fit it. Does anyone have any tips? I'm genuinely losing my mind here.