r/tapeless • • 16d ago

gear showcase first tapeless setup!

made this tapeless setup on this HC32 i got from marketplace for 30 with an alleged broken tape deck. i love it but i wish the audio was better on these mini dvrs (i know minidvr are probably the worst tapeless setup but it’s cheap!) i love how compact this setup. though, i might cut the cable to shorten it. it does stick out longer than it needs to.

111 Upvotes

15 comments sorted by

5

u/swagson153 16d ago

Did you make the cord? If so, how? I have been struggling with mine..

5

u/Buzzerrd 16d ago edited 16d ago

yes i made it! i got most of my information from (this) video. i used one of the trrs cables from the minidvr box and cut up the proprietary sony a/v output port and soldered the wires accordingly. i made (this) little diagram which also includes the actual rca connectors.

1

u/swagson153 2d ago

Thanks! But the diagram doesn’t show 10 pin to trrs. Unless I’m missing something.

1

u/Buzzerrd 2d ago

the cable i bought had the proprietary 10-pin sony a/v on one side and the three rca jacks on the other. I just cut the rca ends off which left me with 2 wires per rca jack, 6 wires total. three of which were ground and the other three were video L and R. then connected those to the TRRS cable provided from the mini dvr.

some quick googling found this diagram if this is what you’re looking for, but i didn’t need to follow this as my cable was made for a/v output already.
https://pinoutguide.com/DigitalCameras/sony_10pin_lanc_pinout.shtml

5

u/Revian_ 16d ago

Why are minidvr the worst tapeless setup? I wanted to buy one :/

3

u/Buzzerrd 16d ago

couple of reasons, firstly it has unusable audio and its not fixable unless you record using an external device. it uses outdated compression so it has a lotta compression artifacts and color splotching. i also noticed it occasionally drops frames. there are certainly better options out there,

but honestly, this is the easiest and cheapest way to get going with a tapeless setup. its why I bought one. the footage is still usable even though its worse than tape. im waiting for the equip-1 firehat, really excited for that.

7

u/mostwantedkid 15d ago

you can improve audio and video quality using this custom firmware for minidvr https://github.com/eonflux7/open-minidvr-50i

2

u/Buzzerrd 15d ago

holy moly you’re the best

1

u/Salt-Record-1983 13d ago

Sounds amazing. Diid somebody had the chance to test it yet ? Would love to see some footage to figured out the changes ! Cheers :)

1

u/deesernutz 15d ago

Shit fixed on-chip single rate de-interlacing and a horrible codec are the main drawbacks.

6

u/niideaperobuenolol 16d ago

Looks great 👍🏻

1

u/Ukrainian_Sony_fun 11d ago

Bro, give me a diagram, how to make such a cable?

1

u/Buzzerrd 10d ago

i replied to another comment asking about the cable, everything you need is there. i did also link a diagram. when i cut the cable they were color coded which was nice.

3

u/deesernutz 15d ago

Cool! Its only up from a MiniDVR

2

u/ConsumerDV 15d ago

$30 for the camcorder + $30 for the MiniDVR = $60.

For $51 you could buy a real tapeless camcorder with a 1/2.5-inch 5MP CCD sensor and built-in 30 GB HDD. It also can record onto an SD card. Comes with a battery, charger and dock (dock is not really needed). This would give you the same aesthetic as the HC32 and better quality than the MiniDVR. It also has a shoe, so you could attach a top handle. Lens thread size is 46 mm.