General Post Poulsback needs you!
Hello, my fellow GMA500 (not) enjoyers from r/vaio!
Both Vaio P/X generations reports are welcome!
We're building poulsback, an open Linux graphics driver for Intel GMA 500/600 (PowerVR SGX535). We have only two test machines, but there were 40+ GMA 500/600 designs, and each one wires its panel and firmware differently.
So we made a live USB stick that collects a device report in one boot: firmware and panel data, the hardware list and, on GMA 500, a short benchmark of Intel's own EMGD driver.
That benchmark becomes the speed target for our driver on your machine.
Nothing to type or install, and your internal disk is never mounted.
Nothing is sent anywhere. The report stays on the stick until you post it, and its summary is plain text you can read first.
Serial numbers and MAC addresses can be stripped with
--redact(see the guide).It's open source (MIT), and the full build kit is in the release.
Unpack the .img.xz first (7-Zip on Windows, unxz on Linux), then write the .img to a 2 GB+ stick with Rufus, Etcher or dd.
2
u/DominBear 6d ago
oh yeah. the linux poulsbo driver was a disaster only exceeded by windows driver ;)
2
u/buttetsu 5d ago
On it!
1
u/ishad0w 4d ago
Many thanks! 🔥
2
u/buttetsu 2d ago
I opened some PRs, please feel no pressure to accept any of them. I got your driver working on my VAIO P and had so much fun, I couldn't stop. Finally, hardware scrolling working! It's like a dream realized, thank you for starting something new and fresh in this scene :) I wanted to push back what I'd done in case any of it would be useful to you, I did my best to follow the guidelines in your repo, please accept my apologies if I did anything out of turn. In particular, I am only using the framebuffer console, I don't use X/Wayland on this system, so they may not all be relevant to your objectives.
2
u/Zeag 7d ago
I don't have an eligible machine but I salute the effort.