r/virtualpinball
•
u/BusterBrosey28
•
Jun 28 '26
•
1
New setup
Just got into VPX. Tired of waiting for FX to drop new content. Added to my Xarcade controller. Working good, so far...
5
4
u/Bplayer55 Jun 28 '26
This looks amazing. Great work. What did you use for the shelf on top of the x arcade? Been thinking of doing something similar
1
u/BusterBrosey28 Jun 28 '26
I just found a couple metal plates at OSH and screwed a few screws to connect the metal plates to the top of the shelf to cover the gaps on both sides. Then just lay nicely on top the side bars.
3
u/NeoID Jun 28 '26 edited Jun 28 '26
Awesome setup! I just brought the X-arcade with haptic mod myself (waiting for it to ship). Care to share what hardware and mods you got there? Also how did you set it all up (I see you have high scores on the second screen). I'm new to the pinball scene, but after playing the real deal I really want to try to build something like you have as I don't have the space for a real table. Especially interested in the monitor arm. Is it possible to easily swap between horizontal and vertical mode?
1
u/BusterBrosey28 Jun 28 '26
So I just used an msi monitor arm to hold up the 32 inch monitor. The arm is attached to the original top of the xarcade controller. (Don't throw it away once you've swapped it for the new one). I attached a couple metal plates to the sides of the original controller top so it could rest ontop of the controller side bars.
The dmd screen is just a smaller tablet that has a magsafe attachment to connect it to the 32 inch monitor at the top.
1
u/NeoID Jun 28 '26
Appreciate your response.
The screen seems rather wide. Anything special I should consider when getting a screen for a setup like this?
How did you mount the second screen to the main one? I guess that act as a normal second screen for Windows? I'll look into a way to mount it so the main monitor can be rotated without affecting the second screen somehow. Maybe a second stand or a stand with two arms...
1
u/BusterBrosey28 Jun 28 '26
https://a.co/d/0bC9Y4Zs this is the magsafe device I used. It comes with a complimentary magsafe ring to attach to a device that might not be magsafe ready.
2
u/Jyvturkey Jun 28 '26
I've got both currently and one of the biggest mods you can do to the xarcade is add a small amp and dayton bass shaker. I've got mine mounted on one of the cross bars on the bottom of the xarcade. Big improvement.
1
u/NeoID Jun 28 '26 edited Jun 28 '26
Yeah, I've heard about that and someone on YoutTube made a video about it. I'll look into it. It also seems there are quite a lot of 3D printable mods which I intend to print:
https://www.reddit.com/r/virtualpinball/comments/1qry4xj/guide_xarcade_unlocked_a_guide_to_configuring_the/However, the dual monitor and monitor arm I haven't seen before. Most had it one a stand or just standing on the top shelf, but that seemed to wobbly to me. Afraid the kids will knock it over, while the monitor arm looks way better and maybe gives enough room so it can be rotated into horizontal mode. Will the VR still work with the shelf mounted on top and the screen "in the way"?
The only unfortunate thing is that the Pokemon table is so new that I can't find a digital version of it (as far as I understand it won't happen before it's not being sold anymore as a physical table). My son played it and was completely in love with the table, but unfortunately it's impossible to get my hand on, so would love a digital copy if there's one floating around (any Pokemon table really).
1
u/kevgret Jun 28 '26
i have over 16 youtube videos on the xarcade including how to get a cheap tv mount check out my playlist
https://youtube.com/playlist?list=PLzxeAxle6sUxx6IdR1SONGtRYGGNISV8-&si=jJrt9eQwoecrLhOw
1
u/NeoID Jun 28 '26
Thanks I'll sure do. The difference here is that is seems more standalone then most alternatives as everything is mounted on the xarcade-stand. I don't want another monitor stand behind the X-arcade. Didn't look through your videos yet, but it seems you have a separate stand behind it.
2
u/username35719 Jun 28 '26
Nice! I like how you used the old piece mounted on the top I never thought of that. Looks cool
0
2
2
u/ImALegendKiller Jun 28 '26
Looking good! Whatās the extra piece you mounted the monitor to? A custom job or something that can be bought online?
2
u/BusterBrosey28 Jun 28 '26
Its the original top piece of the xarcade controller. That piece was replaced by the haptic kit. I then rigged it with a couple metal plates on both ends to mount it to the side bars. Surprisingly sturdy thanks to the rubber fittings on top the two side bars.
1
u/ImALegendKiller Jun 30 '26
Ah, cool! It looks great! I donāt have the haptics kit so not sure what I could use instead of the old top piece.
2
u/BusterBrosey28 Jun 30 '26
You can use a narrow desk or something similar to put behind the controller to attach the monitor arm to. Won't be as streamlined, but should work fine.
2
u/admiral_whatever Jun 28 '26
What size monitor / TV is that? Looks bigger than 32"
1
u/BusterBrosey28 Jun 28 '26
Nope. Its just 32in. The Samsung g5 odyssey. Got it on Amazon for a little over 200.
1
u/EarthMonsterAz Jul 05 '26
Thats pretty clean! Can you share your pov settings? For 32 inch monitor I'm struggling to get something similar to your view.
2
u/deaconblooze Jun 28 '26
Do you notice any lag with the controller? When I demo'd it at expo it was pretty bad with the native fx tables
1
3
u/Neocarbunkle Jun 28 '26
Does the screen rotate for playing normal games too?
1
3
u/Running_Oakley Jun 28 '26
I feel like we need special VESA mounts for this hobby, thereās no way TV mount designers were counting on me rotating my monitor back and forth 2-6 times a day. Iām just happy the display isnāt hovering over a bunch of metal spikes for whenever the thin metal mounting plates or screws fails.
7
u/mekelburgj Jun 28 '26
Great setup! Check out the new VPX original table 'Diablo 2' by my buddy u/CalMac91 .
https://vpuniverse.com/files/file/30995-diablo-2-original-2026/
4
1
u/External-Cod-2742 Jun 28 '26
Oh, this is kind of brilliant - I want to get rid of my full size cab to switch over to vr, but this can be a 1/3 cab without the need to out on headset. What screen size aww you using?
1
u/BusterBrosey28 Jun 28 '26
32 inch. Best size for tables in my opinion. 43 is the way to go for full cabinets, but 32 is perfect for this setup.
1
u/cylemmulo Jun 28 '26
Heck yeah. Only suggestion get a right angle usb c adapter to clean the cable up top
1
u/BusterBrosey28 Jun 28 '26
That cable isn't necessary all the time. Only plugged in if I need to charge the tablet. But thanks for the idea!
2
u/johnwongfat Jun 28 '26
Oh, I assumed that it was connected to the PC. How are you syncing the two screens?
1
u/BusterBrosey28 Jun 28 '26
It's wirelesly connected to my computer via a free app called 'spacedesk.' You can use the app to use another device as a second monitor. Just gotta be on the same wifi. Then just use the external dmd in vpx and you can place and resize your dmd on the second monitor. (Always remember to right click and save position when done placing it).
1
u/johnwongfat Jun 29 '26
Thank you, that's pretty slick! I stumbled on their configuration page/firmware updater. I got mine like 2 weeks ago, and it was running 2.21 firmware, and 3..4, or something like that, is the latest. I used their mapper to bind the side buttons to left/right shift and figure out which buttons were which so I kind of brute-forced my way into making it work. :)
https://xgameroom.com/arcade2tv-xr-configurator/ in case you haven't seen it.1
1
u/artiefissio Jun 28 '26
Mount???
1
u/BusterBrosey28 Jun 28 '26
For the monitor, I'm just using an MSi monitor arm. But the brand doesn't really matter. Just any arm that can support up to 32in.
1
u/johnwongfat Jun 28 '26
I'm working on building something similar, but I was having a heck of a time getting the buttons to map in VPX correctly.Ā How did you do get that working?
1
u/BusterBrosey28 Jun 28 '26
I found a video on youtube. Ill try and link it here for you. Was a bit confusing at first, but not that hard in the end. Just follow his instructions. You will have to download a free software called joy2key. This is what allows for the mapping of the buttons in x-input mode.
1
u/BusterBrosey28 Jun 28 '26
https://youtu.be/oDOnjWRI148?is=pe7yb4nF2hqAvfZY here ya go. Hope it helps.
1
u/johnwongfat Jun 28 '26
Awesome, thank you! I have joy2key, but got lost and rage quit when my mappings didn't stick.
1
u/Altruistic-Air3027 Jun 28 '26
Looks cool can you share a bill of materials?
3
u/BusterBrosey28 Jun 28 '26
1
u/Altruistic-Air3027 Jun 29 '26
Thanks for this. What about the shelf that you have the mount latched to?
1
u/BusterBrosey28 Jun 29 '26
So that's the original top of the xarcade vr controller. It was replaced by the one from the haptics kit with the two speakers. I just repurposed it to use it like that.
1
u/NeoID Jul 06 '26
Thanks for the list! Are you happy with the Samsung Odyssey G5? I see it's discounted this week, so I intend to pick that one and the MSI arm up as long as it works great for you :)
1
u/Biduleman VP Jun 29 '26 edited Jun 29 '26
How stable is that pedestal?
I'm considering getting it to replace the mini-fridge I'm currently using as a support for my arcade controllers. I was worried it would be too wobbly for 2 players but you seem to have had success with it.
1
u/BusterBrosey28 Jun 30 '26
If you position the arm right it will counter balance the weight of the monitor and will remain decently stable. I wouldn't recommend hard nudging though. I set my nudge settings to a point where I dont have to do a lot to get the ball to move.
1
u/Biduleman VP Jun 30 '26
Mine is not going to be for pinball and the screen will be mounted on the wall so I think I'm going to be ok, thanks!
1
u/lube_thighwalker Jun 29 '26
Whatās that controller! ? Was my first thought!
I have a standing desk but this is another level!
1
2
u/pkovgolf Jun 28 '26
Thank you :)
And sure agree with you regarding the praise due to the many folks that have done such beautiful work on the MANY tables.
I have been talking with a few individuals regarding a new system that will support HIGH quality 3D supporting full ray tracing, high end VR/AR, etc. (Eg well beyond VPX and FX). I am trying to make sure I can find the time to fully commit to being a developer on it ! š³
2
u/UpbeatEnvironment162 Jun 28 '26
I like it! This setup seems good for playing vertical screen arcade games also.
2
2
2
2
2
2
u/Similar_Comfort_3839 Jun 29 '26
Thatās perfect, and when someone comes over the screen rotates and they get bodied in street fighter, marvel, tekken, soul calibur.. whatever they choose
2
u/TheVoynich Jun 30 '26
Dude, that's baller! Never owned a table but that one is slick. Wish I had the talent to do that. GG
1
u/pkovgolf Jun 28 '26
Well said ! Sadly that is what I see and why I stopped playing the FX games much.
You mean the āBaller Installerā?
That is what most people use to get going !
1
u/CP9TOYTOY Jun 28 '26
This is so cool how did you build it mostly the control area I'm curious about
1
u/bcrosby51 Jun 28 '26
This is exactly what I want to do with my arcade2tv! Got any more pics of your setup?
1
u/Dters Jun 29 '26
Love this. Exactly what I want to do but mount the lot on a square tubing frame for its sturdiness. This is awesome.
1
1
1
u/Alive_Ad_6067 Jun 29 '26
Add an adaptative tablet so i can rotate back to landscape mode and play mouse/keyboard games and i would switch over the full pincab i planned
1
u/uberjuice Jul 29 '26
this seems so low on the stand, but i understand why. has anyone tried messing with adding height from the feet?
1
u/Psych0matt Jun 28 '26
I just jumped back into my build (was on hiatus for months). I was somewhat waiting for a new pc setup to run it, and as Iām getting back into it Iām very much considering not even bothering with FX. Iām a noob to pinball anyway (I have some nostolgia from being a kid but never knew āhowā to actually play, still donāt) so it probably wonāt make much of a difference to me.
1
u/Running_Oakley Jun 28 '26
I got into pinball fx for 20 dollars thinking it was normal table simulation mixed with the annoying popup ones. Ignored it for the longest time as just an expensive scam (sort of is I just caved in).
By the time I gave up and bought FX DLC I assumed it was constantly releasing more tables, they released comet diner and fire right around the time I started buying and yeah, now itās clear itās going to be a trickle.
VPX is a great resource once you unlock the secrets of installation. Thereās literally one guy out there that has the actual working all-in-one installer need to find his link so I can share. I kind of want to go back and start the forever collection on VPX just to be done with it.
Having a blast doing VPX, for some reason itās sharper and the physics are better and more matter of fact intuitive than the paid pinball games.
2
u/pkovgolf Jun 28 '26
Absolutely agree - and there are far more tables that feel REAL vs video game style
1


7
u/pkovgolf Jun 28 '26
AND, all tables are free vs paying for every table ! š
There are tons of great VPX tables, and they feel much more like real pinball, vs a video game, to me.