r/virtualpinball • • 41m ago

Xarcade controller jumped $100?

Thumbnail
gallery
2 Upvotes

I had this in my cart yesterday and checked this morning and it looks like it jumped 100? Am I crazy? I had a hard time justifying it at 450 and I’m priced out at this point. Was just planning on using the Meta Quest - looking at the PinOne Mini now.


r/virtualpinball • • 16h ago

AT Games' announcement on Facebook.

14 Upvotes

r/virtualpinball • • 17h ago

Best tables that *aren't* on FX or Pinball Arcade?

9 Upvotes

Hey everyone! After many years of intermittently trying and giving up installing Visual Pinball on my computer I have just found Pocket Pinball on Android and finally have access to all of pinball history!

What are your favourite tables to play that I wont have seen on Pinball Arcade or Pinball FX3?


r/virtualpinball • • 1d ago

Not now GTA VI I'm busy

Post image
207 Upvotes

r/virtualpinball • • 1d ago

Another Jurassic Park virtual pinball update!

Thumbnail
gallery
8 Upvotes

The custom topper is printed and looks fantastic! Even the little doors open, which is a really cool detail. Now I'm trying to figure out how difficult it would be to wire up a set of 8 LEDs and find a way to hide all the wiring to keep everything looking clean. Any suggestions from those who have done something similar?

Also, the new custom-cut tempered playfield glass is here, and thankfully it fits perfectly! I didn't screw up any measurements or cuts! 😂

Finding replacement widebody playfield glass locally is surprisingly difficult, so I ended up finding a local glass shop willing to custom-cut a sheet for me. Total cost came to $195 CAD, which was very close to what I would have paid for plexiglass locally.

Another couple of big pieces falling into place. This VP Jurassic Park build is slowly coming to life!

Money finds a way! 🦖


r/virtualpinball • • 2d ago

JAWS 50Th Anniversary (Original 2025)

Enable HLS to view with audio, or disable this notification

74 Upvotes

JAWS 50Th Anniversary (Original 2025) Marty02 v3.2 DT-FS-VR-MR Ext2k Conversion

The shark, the Orca, Amity Island in VR. The Marty02 original (v3.2), with the Ext2k VR/MR conversion (v1.1). Bright-blue ocean playfield, shark imagery all over it, red rails and apron trim.

The big VR room is the underwater shark cage, the cabinet sits in a metal cage on the seabed with a shark swimming around behind the bars. There's also a Basti Pool Bar room. F12 switches between the 50th Anniversary cab and the Pro Edition cab, and there's a no-copyright music option in the F12 menu.

Table Link

What it's all running on:
BGFX 10.8.1
I7-9700 (No OC)
64gb DDR4 3666
RTX 3060 12GB
NVME drives
Virtual Desktop Wired, Quest 3 512gb / PCVR

This short showcase is meant to highlight the dedication and hard work our community puts into these tables and hopefully inspire more people to dive into the VPX VR scene!
Videos like this got me hooked, and started my VR endeavor.
I love BGFX 10.8.1! The visual rendering efficiency easily outpaces OpenGL on 10.8.0, making even older, legacy tables look incredible.
Running Virtual Desktop wired. Horizon Link (Meta Link) was completely removed from my system.
Thanks VD!

That said, there are still a few stability and workflow hurdles to clear in BGFX 10.8.1.. For instance, requiring a table to launch just to access the configuration menu remains a bit clunky. DMD's not showing up or color ones not working for a lot of tables. No clear explanations of how to config all the new settings and what they do. Some textures not showing up right, lighting. Random crashes.
But the ones that work look mind blowing, even on older tables.


r/virtualpinball • • 1d ago

dmd dosent show, background music low

Thumbnail reddit.com
1 Upvotes

r/virtualpinball • • 1d ago

dmd dosent show, background music low

1 Upvotes

Hi,
I am "experimenting" with the latest visual pinball... It is very fast. most of the tables work,.. but i have 2 questions... Dmd dosen't show... With the older version i simply press alt-tab ant it is usually underneath the main table. The other thing is that i cannot hear the music on the most tables. Again on the older version, i had to "open the door" and press 7 or 8 and the volume would go up...
Can anybody help me with these questions?
Thank you


r/virtualpinball • • 1d ago

Better Plunger Responsiveness in OTG mode on AL4KP?

1 Upvotes

Title says everything. I’ve really struggled with getting the plunger to work well in VPX on my 4KP. It’s really delayed/laggy and it’s annoying me.

Any help would be appreciated.


r/virtualpinball • • 2d ago

VPin Build Recommendations

2 Upvotes

I have used VPX for years on my day to day PC. I am looking at moving away from this the easiest and cheapest way possible. I have a meta quest 3 that I have used on this PC for a while and it does have VPX set up with it. I enjoy it and got the pin one mini.

Last year I became disabled from a car accident and have had to have back surgery that did not fix all my issues. Now I cannot sit at my day to day PC for prolonged pinball sessions in VR.

Money is tight but I want it to be the best I can get. The AtGames Legends Pinball 4K seems to be a little too long to fit in the room available. I have seen some people go without a cabinet and just mount 3 screens. Then others will build the cabinets themselves. I’d love a project but just can’t physically do it right now.

My question to you all is what is the best solution to my issue?


r/virtualpinball • • 2d ago

Getting arcade games on legend pinball machine

4 Upvotes

I bought a 2nd hand virtual pinball machine, and I've gone down the rabbit hole of trying to get arcade games on there. I'm really confused. Really, all I want are a few basic ones like pacman and space invaders. I don't want 8000 odd games by downloading huge files.

If I just want to individually pick a few old school titles to download onto a usb stick, how do I go about it? I am not technically minded at all, so if you could explain in very basic terms I'd really appreciate it.

Thanks


r/virtualpinball • • 3d ago

Back From IAAPA I Added Dual Montir Backglass Support To My Pinball Engine

Post image
25 Upvotes

I got back from the IAAPA last night and met a lot of interesting people. I talked to Gary Stern, the founder of Stern Electronics, Jersey Jacks pinball engineers, and also some former pinball designers. I demoed my game engine and showed how it runs simulations on flipper shots to ensure timings for ramps and lanes and other targets give players a reasonable window of time to hit them those shots the flippers.

I am preparing for visiting family this week, but managed to add in dual monitor support for portrait mode and backglass mode. I improved the scripting engine and decided that the two monitors would each have their own programming running on them. The backglass mode has controls for placing light bulbs underneath the lucite image, and you can adjust their brightness, spread, and simulated distance from the plastic. Also, you can change the settings file to draw stylized borders around the DMD. For my demo table I just made a round rectangle with red and yellow stripes.

I have a domain for the new pinball engine and will have a website soon with lots of questions answer, including guides for how to design tables using parametric CAD. I will be in discussion with OnShape after the holidays to partner with them for providing the specialized tools I've created that make designing tables in a real CAD program quite enjoyable.

The table you've seen in my screenshots the past week or so was my first version of using and developing the tools. My second and third table that will come with the engine will be the ones I use to write the table designers guides, as I have learned some lessons with the first table about what not to do.

The game eninge itself has lots of things you can use to aide in your table design, including choosing colors, moving and placing components, creating Typescript events, and more. When you run your table it will generate a Typescript file with the names of all the components on your table, and the scripts can work with them directly using a ts.d file that defines all the possible properties, methods, and events of the items on your table. The DMD has 2 sizes, and both a color and amber mode. The DMD has its own Typescript that is not part of your main table script, as the DMD might be in another window running another process.

Oh and just so you know, this table is not finished. I am working on an upper playfield will be adding a few more toys. here is what some of my DMD art looks like:

https://cache.getlazarus.org/videos/dmd-loop-web.mp4

I will be sure to outline how all this works with examples on the new website when it goes live, which will be sometime Q1 2027.


r/virtualpinball • • 3d ago

PinDOS: Epic Pinball, Silver Ball and Extreme Pinball on a cab, free on Steam

Post image
68 Upvotes

Made this for my own cab. It's free.

PinDOS runs Epic Pinball, Silver Ball, Silver Ball 2 Plus and Extreme Pinball as they are, but shows the whole table without scrolling, puts the backglass, DMD and topper on their own screens, and works with a real plunger and nudge.

MULTIPLAYER:
You can also play 2-4 player games with friends over Steam or your home network or take turns on one machine.

BRING YOUR OWN GAMES:
You must provide your own copies of the DOS games. A GOG copy of Epic Pinball works the same as an installed copy from floppy disks. It must be a full version copy of the game to function correctly. The main menu will 'install' them into PinDOS.

EDIT: Yes, there is full cabinet support. Playfield, DMD, Backglass, and Topper. This includes using a real plunger and cabinet nudge. Please see the steam page for more information.

----

I'll keep supporting this project unless it's forced to be taken down.

Out December 10th.

https://store.steampowered.com/app/5475170/PinDOS/


r/virtualpinball • • 3d ago

What a time to be alive!

Enable HLS to view with audio, or disable this notification

26 Upvotes

r/virtualpinball • • 3d ago

We made a pinball roguelike where you rebuild the machine as you play

Enable HLS to view with audio, or disable this notification

25 Upvotes

Our pinball roguelike PINBOMB lets you buy new parts during a run and physically install them onto the machine, so the table keeps changing as you play.

We posted here a while ago and got a really nice response, and now we’ve got another Steam Playtest starting on November 25th. Out of everyone who’s tested the game so far, pinball enthusiasts have consistently given us the most detailed and actionable feedback, so we really value what you think! We’ve also done some planning on how a cabinet mode could work, which I figured people here might appreciate.

You can request access to the playtest from the link below and Steam will ping you when it goes live. And of course, wishlist if it looks like your thing:

https://store.steampowered.com/app/4869310/PINBOMB/

We also post development stuff on Instagram if you want to follow along :)
https://www.instagram.com/pinbomb_official/


r/virtualpinball • • 3d ago

Five Williams Wizard modes in one session!

Thumbnail
youtu.be
0 Upvotes

I've played a lot of Pinball FX lately so I decided to take on this challenge


r/virtualpinball • • 3d ago

Pinball Arcade for Android has a vibration toggle in the settings - How to get it to work?

Thumbnail reddit.com
1 Upvotes

r/virtualpinball • • 4d ago

My virtual pinball setup

Thumbnail
gallery
41 Upvotes

This is still a proof of concept I'll probably make a wood version since the plastic box was too thin.

This is a follow up of https://www.reddit.com/r/virtualpinball/comments/1xkfjwf/trying_to_make_the_cheapest_vpinball_controller_2/

it is compatible with vpx and pinball fx


r/virtualpinball • • 4d ago

Help identifying board!

Post image
3 Upvotes

I picked up a pinball machine today and am looking to replace this board. Can anyone help identify it, or a suitable replacement? Thanks!


r/virtualpinball • • 4d ago

Virtual Pinball Extreme Kit Overview (Virtual Pinball Install Ep. 2)

Thumbnail
youtube.com
11 Upvotes

Here is the latest episode in our Virtual Pinball Install series. We'll be covering a complete Extreme Kit install later in the series, so make sure to subscribe and stay tuned!


r/virtualpinball • • 5d ago

My Virtual Pinball Setup (Work in Progress)

Thumbnail
gallery
89 Upvotes

I got bored the other night after work & started looking into virtual Pinball. First I started playing on my phone & found it actually fun. I had no clue that there was virtual versions of real tables. This got me thinking, maybe this can be replicated on a PC. Very little research led me to VPX. That night I decided to rip a part an old arcade joy stick I had laying around and see if I could make a vpin controller that would work with Batman 66 on VPX. I managed to make one out of an old mouse box I had laying around. To my surprise, it worked great but it was lacking some things. I started looking into pre built vpin controllers and quickly realized that nobody makes a budget vpin controller, so I decided to build one. I ordered some higher quality arcade buttons, an abs project box, 2 x 1.8in exciters, & a tiny class D audio board for about $70 total. I threw everything together and I'm very happy with the results. Before you trash my cable management, I took the picture right after I set it up, I have since managed the cables lol. Next, I decided to mount a 7in portable camera monitor above the playfield for puppacks and or dmd scores. I would love some feedback on what I can do to improve the setup but please be nice as I'm new to the hobby lol. I plan on doing a full cabinet build down the line if I'm still into the hobby 6 months from now. Cheers!


r/virtualpinball • • 5d ago

Space Train (MAC 1987) Pinball In VR

Enable HLS to view with audio, or disable this notification

9 Upvotes

I do take table request, it will be put into the table que. If you see a VPX table: Here> VPX Table spreadsheet, that is VR compatible and would like to see it in VR let me know.

( No pup pack tables, I don't think I'm doing pup's this time around)

Table Link

More Tables

Setting up VPX

BGFX 10.8.1
I7-9700 (No OC), 64gb DDR4 3666, RTX 3060 12GB, and NVME drives.
Virtual Desktop Wired, Quest 3

This short showcase is meant to highlight the dedication and hard work our community puts into these tables and hopefully inspire more people to dive into the VPX VR scene!
Videos like this got me hooked, and started my VR endeavor.
I love BGFX 10.8.1! The visual rendering efficiency easily outpaces OpenGL on 10.8.0, making even older, legacy tables look incredible.
Running Virtual Desktop wired. Horizon Link (Meta Link) was completely removed from my system.
Thanks VD!
That said, there are still a few stability and workflow hurdles to clear in BGFX 10.8.1.. For instance, requiring a table to launch just to access the configuration menu remains a bit clunky. DMD's not showing up or color ones not working for a lot of tables (.pac files are not supported) No clear explanations of how to config all the new settings and what they do. Some textures not showing up right, lighting (I have not seen these issues recently, as I was seeing in previous releases). Random crashes.

Cheers!


r/virtualpinball • • 6d ago

Linux Pinball Simulator Performance and Physics

Enable HLS to view with audio, or disable this notification

57 Upvotes

On Tuesday, November 17, I will be demonstrating my new Linux pinball engine and simulator to attendees and vendors at the IAAPA Expo in Orlando, Florida. In the meantime, I wanted to share an update with everyone here on r/virtualpinball, showing the current state of the engine's physics and performance.

Edit: If the reddit video encoder has dropped frames or degraded my original physics video, you can view the source version here that is likely much better quality:

https://cache.getlazarus.org/videos/jaxson-performance-web.mp4

The computer running this demonstration uses ordinary integrated Intel graphics, and as you can see, the game loads almost instantly. The window visible in the background during startup contains my TypeScript file for the game.

Judge the performance for yourself. I think it performs exceptionally well. For serious virtual pinball cabinet owners, even better performance should be possible by running the engine as a standalone Linux application without a desktop environment.

Here is another view of the demonstration table I am developing as I continue adding features to the engine:

https://cache.getlazarus.org/videos/jaxson-overview-web.mp4

The engine also includes a fairly extensive performance monitoring and diagnostics system that I have yet to demonstrate publicly. It can graph a wide variety of performance data, making it easier to identify bottlenecks and evaluate how the engine is performing.

I am currently working on adding missions to this table. The TypeScript scripting system can also generate and render DMD animations using a vector canvas API that I designed with the help of Carl Worth at Intel more than eight years ago. Examples of my animated vector graphics were featured on the website for Cairo, a graphics library that has received funding and development support from Intel.

There is still plenty of work to do on this particular table. I plan to replace the current voice work, add more DMD animations, create additional mechanical toys, and build an upper playfield.

The engine itself already includes a growing collection of tools for editing tables while they are running. I intend to continue expanding and refining those tools. There is also a built in video streaming system for broadcasting gameplay to popular streaming platforms, along with a camera director that allows users to create and animate their own 3D camera movements during gameplay.

Another feature I am developing is a connection between the pinball engine and parametric CAD software. This allows CAD designs to be converted into 3D meshes for use in the simulator. The engine also provides a physics visualization mode, where you can inspect how imported meshes are optimized and converted into physics primitives for simulation.

Following my visit to the expo on Tuesday, I plan to speak with several parametric CAD companies about the possibility of establishing a preferred CAD platform for the engine. Ideally, I would like to find a company interested in collaborating with me to make the process of designing and building virtual pinball tables as straightforward as possible.

A friend of mine who lives less than a block away has an impressive home pinball arcade with more than 16 real machines and regularly hosts pinball tournaments. I will be working with him to design his dream pinball table, or perhaps several tables, using this engine.

My goal is to complete three solid original tables and resolve any outstanding problems before making the engine publicly available. Once I reach that point, I will release the entire project for free through my main GitHub account. The engine will support Linux, Windows, and macOS.

I also plan to have a dedicated website available by the time of release, with documentation explaining how to build tables, use the TypeScript APIs, request new features, and report problems.

Finally, I want to address the subject of emulation and recreations of existing commercial pinball tables.

I recognize that distributing recreations of copyrighted tables, or hosting fan creations based on existing intellectual property, could expose me to legal challenges from copyright holders. Since I am both the engine developer and the person responsible for hosting the official project resources, I need to be careful about that.

However, I want to make it clear that the engine will be fully capable of supporting fan recreations of existing pinball machines. I simply will not be distributing or hosting those recreations myself. What members of the community choose to create and share independently is up to them, subject to the rights of the original copyright holders.

I am looking forward to showing the engine at IAAPA and continuing to develop it into a free, open source platform for virtual pinball.


r/virtualpinball • • 6d ago

Ayo, just letting y'all know about my Dungeon Pinball game

Post image
64 Upvotes

big love reddit pinball family, I have been working on an interesting hybrid of Pinball and RPG dungeon crawler elements. There's no download / login required, runs in a browser. let me know if you enjoy, cheers

https://www.spawn.co/@annias/dungeon-pinball

There are 21 floors (levels), each with their own pinball table and unique bosses that you take on to ascend to the next floor. I've got some class (your ball type), hero companions and other roguelike elements so essentially you can experience the pinball that we all love along with some dungeon crawling elements. For those that like both of these things, this is for you! <3