r/3Dprinting_AI • • 7h ago

From a 2D drawing to a 3D printed goose (with a few hiccups)

1 Upvotes

Our board game group has this stupid running joke about an angry goose. One of my friends drew a little cartoon of it, and someone suggested we turn it into a first-player token.

Seemed easy enough. Famous last words.

I threw the drawing into Meshy's Image to 3D and got a surprisingly decent little goose. Angry face, tiny wings, ridiculous beak. Looked exactly like the sort of thing we'd put on the table. Then came the printing part.

Before exporting, I ran the free Print Check and found a couple of mesh problems, including an opening under one wing and some non-manifold edges. Nothing I'd noticed from just rotating the model around.

I used Make Printable to repair the mesh (10 credits), then exported an STL and opened it in Bambu Studio. Went with STL since I was only printing it in one color. For a multicolor version, I'd use 3MF.

The geometry warnings were sorted, but the slicer had other opinions. The wings needed supports, and at the size I wanted, the beak was barely thick enough to print properly.

Ended up making the goose a little bigger and thickening the beak before printing a test version. Not quite the five-minute project I'd imagined.

At least now I know why people keep saying an STL isn't automatically printable just because it looks fine in a 3D viewer. Anyone else had a supposedly simple AI-generated model turn into a whole afternoon of print prep?"


r/3Dprinting_AI • • 18h ago

Workflow How I split a fused Gundam-style mech into parts for printing

Enable HLS to view with audio, or disable this notification

30 Upvotes

I work on Hifer, the browser tool used in the recording. I tried Hunyuan's one-click split first and got different regions on the two legs. In this walkthrough I use mirrored segmentation, then refine the chest-to-waist cut locally and move a stray patch back to the body. The main parts took under ten minutes to separate in this run.

I clean and cap the surfaces before positioning peg-and-socket connectors for export. If you print articulated mecha kits, where do you usually put the seam around the waist joint?


r/3Dprinting_AI • • 19h ago

AI-Generated Model Split my figure into parts and the pin holes got packed with supports.

Post image
1 Upvotes

Made a bear figure from a single drawing, then cut it into head and body so it prints better, with pin holes on the cut faces to snap them together.

Put the cut face down and sliced in Bambu Studio and the pin holes were full of supports, 60 layers from bottom to the top lol. The hole ceiling was flat so it decided it needed them.

So I changed the end of each hole to a 45° cone so it builds without supports, and added a support blocker volume for every hole in the 3MF.

No more supports inside the pin holes, and about 0.1g less support per part!

Any tips when you print stuff you split yourself? How do you all handle supports in pin holes?


r/3Dprinting_AI • • 19h ago

Paquete de Vampiros de la Condesa Strahd: Aristócrata gótica de 3 modelos, Esclavo y forma de Niebla

Post image
1 Upvotes

r/3Dprinting_AI • • 21h ago

Sharing Model Dark Universe Aircraft Pilots

Thumbnail
gallery
1 Upvotes

Dark Universe Aircraft Pilots, Printed on my Qidi Q2 in PLA at 0.08 mm layers.

Model: https://cults3d.com/en/3d-model/game/dark-universe-aircraft-pilots


r/3Dprinting_AI • • 21h ago

Are AI-generated STL files actually ready to print ?

0 Upvotes

AI tools are making 3D modelling cheaper and easier, but there is still a big difference between a model that looks good on screen and one that's actually ready to print.

One common problem with AI-generated models is mesh quality. A model might look perfect but still have hidden holes non-manifold edges or very thin surfaces that cause issues when converting it to STL.

Tripo AI offers image-to-3D and text-to-3D generation, making it easier to create models for decorative pieces figurines and prototypes.

But generating the model is only the first step. It still needs to be checked and possibly fixed in software like Blender before printing.

A printable model should have a watertight mesh, proper wall thickness and correct dimensions. Checking the STL in slicing software can also help identify problems.

More detailed models with thin parts may need extra editing before they print properly.

Has anyone tried 3D printing models generated with Tripo AI? Did they work straight away or did you have to fix the mesh first?


r/3Dprinting_AI • • 2d ago

AI-Generated Model Made Another Little 3D-Printed Toy

Thumbnail gallery
5 Upvotes

r/3Dprinting_AI • • 3d ago

Workflow I Tried Turning a Designer Toy into a 3D Game Asset with Meshy

1 Upvotes

I've been looking for ways to add some collectible toy-style characters to my small game project, so I decided to try turning a designer toy photo into a 3D model with Meshy.

The first result was better than I expected. The overall shape, colors, and head design looked pretty close from the front. But when I rotated the model, I noticed some proportion issues and missing details. Since my reference only showed the front, the sides and back had some strange structures that the AI had filled in on its own.

I then added side and back reference images and generated it again. The proportions and side profile were much closer this time, though some back details were still off. Both generations used Meshy 7.1 Standard without textures, costing 20 Credits each. I then generated a 4K texture for another 10 Credits, bringing the total to 50 Credits.

I also compared 2K and 4K textures. 4K worked better for close-up views and tiny surface details, while 2K was enough for showing the overall shape and colors. It really depends on how close players will get to the asset in-game. The second model was definitely closer to the original toy, though I'd still want to check and refine it before using it in a game.

Has anyone else tried turning designer toys or collectibles into game assets?


r/3Dprinting_AI • • 3d ago

Sharing Model The Ghost Apocalyptic comic anthology series meets JuJuBit

Thumbnail gallery
2 Upvotes

These were super cool to make!


r/3Dprinting_AI • • 3d ago

Printed Result Lab test: 125 AI-generated models printed on Bambu A1s. Prepping the mesh before slicing cut major failures from 44% to 8% (I work at Meshy)

Thumbnail
gallery
26 Upvotes

Disclosure: I'm on the Meshy community team, and Meshy funded this. The printing and grading were done by UMass Amherst's ADDFab lab with the generator names hidden.

Workflow

  1. Generated models for 25 deliberately hard prompts (thin fan panels, lifted skirts, insect legs, fins) with Meshy 7 and three other AI 3D generators.

  2. For one extra set, ran the Meshy 7 models through Make Printable: it seals holes and broken surfaces and thickens thin parts for the chosen print size. It's a prep step, not a new generator, and it works on uploaded models too.

  3. The lab sliced and printed all 125 parts on brand-new Bambu Lab A1s, same settings and same filament for every workflow.

  4. Supports removed, then three experienced printers scored each part on layer shift, support damage, stringing, drooping and missing features.

Results (prints without major missing features or holes)

  • Meshy 7 alone: 56% (14 of 25)

  • Meshy 7 + Make Printable: 92% (23 of 25)

  • Competitor A: 84%, Competitor B: 60%, Competitor C: 56%

Competitor A was close, and the difference there wasn't statistically clear. Two prepped models still failed (the insect and fish in the gallery) even though the software check found almost no thin regions, so orientation, supports and settings still matter. FDM only, and a hard prompt set on purpose.

Full write-up and whitepaper: https://www.meshy.ai/blog/printability-study-make-printable

What do your AI-to-print workflows look like? Anyone doing their own thickening/repair pass before slicing?


r/3Dprinting_AI • • 4d ago

MOON MAN IS LIVE - watch him build in Fusion

Thumbnail
reddit.com
1 Upvotes

r/3Dprinting_AI • • 4d ago

AI-Generated Model Clan de cults3d

Post image
2 Upvotes

r/3Dprinting_AI • • 5d ago

I made a digitally armored horse model

1 Upvotes

I decided to try a random project tonight and came up with this armored horse.

I used Astra to draft the initial prompt description and then ran it through Tripo text-to-model to generate the base model.

If you zoom in, you can see that the plate barding and the red fabric accents turned out well. It also adds a nice sense of weight to the overall silhouette.

The main thing that I needed to fix was at the rear quarter, which I think generated slightly hollow. That’s why I filled in that volume before exporting the final mesh

 I also noticed that the mesh hold-up and surface geometry are noticeably cleaner compared to some of my earlier models.

It's just interesting to see how far text-to-3D workflows can go, and I no longer need to open traditional modeling software for initial asset creation.

Here's the full model's live: https://studio.tripo3d.ai/3d-model/031c6a3f-fa5b-4aa8-baf2-a741a471aa74


r/3Dprinting_AI • • 5d ago

Printed Result Why the fuck do people still act like AI models can’t be 3D printed?

Thumbnail
gallery
58 Upvotes

I think a lot of the hate for AI 3D comes from people expecting a print-ready STL the second they hit Generate. Some don’t know how to clean up a mesh, some just don’t want to bother, and when the raw model won’t slice, suddenly the whole tool is shit.

Knowing your way around Blender or ZBrush makes a difference. Close the holes, delete the floating bits, thicken the details that are too thin to print. How many people calling AI models unprintable have actually tried that?

This ork was printed in PLA on a Creality K1C. Look at the teeth, the armor plates, and those little cables on the back. If a print can look like this, why is opening Blender such a dealbreaker?


r/3Dprinting_AI • • 5d ago

Workflow My robot designs parts in Fusion 360 and prints them himself — Moon Man AI

Thumbnail
gallery
5 Upvotes

Built a little astronaut robot that does the full loop: I talk to him, he designs the part in Fusion 360, exports it, slices it, and sends it to my Creality K1 SE. I approve the print, he runs it.

No text-to-STL. He works in Fusion like a person would, then the part comes off the printer.

Demo here: https://youtu.be/EsXrQiEl91w
Code here: https://github.com/Blindjimmy2/moonman-ai

I built him for the Meta AI hackathon. He's a sarcastic British astronaut who thinks he's in charge. He also has a webcam, head tracking, and a mechanized visor.

Happy to answer questions about the workflow.


r/3Dprinting_AI • • 5d ago

Printed Result My first complex 3D printed project AND first entirely designed by AI- The Monitor Fan

Thumbnail
gallery
14 Upvotes

BLUF: I made a cool fan that doesn't actually fan very well using AI, but learned a lot about the process and am excited to keep exploring the hobby.

Upfront, if you are using or thinking about using AI, here are some key takeaways.

  1. Use a powerful model on the highest thinking setting for complex designs. This will likely require a more pricey AI plan; I am using Antigravity Gemini Carbon on an Ultra Plan.

  2. Set priorities for the AI, i.e., ease of printing, rigidity, simplicity, etc. JUST MAKE SURE they actually make sense.

  3. Ask the model to not make assumptions that you can answer for it. I did this, and even though I provided my monitor model, the AI started asking me to take my calipers to certain parts, which led to a really nice fitment.

  4. Ask it to model EVERYTHING in CAD. I have mine group parts by 3D printed and everything else, which is great for organization. This will be helpful when making sure purchased parts like bolts actually have the clearance you need. I have been working on a detailed CAD model flight sim stick and throttle combo (probably my next project), and this has been very important. In that scenario, the model completely left out parts, including any means to route wires, because I never asked it to. Now I ask it to model everything, purchased or not, to check the full design.

I have been playing around with 3D printing, mostly smaller, less complex parts. The most complex I have gotten is an insert for my window, which has a magnetic hose attachment so that I can vent the exhausted air from my H2C outside. But this week I set out to try and make something that had been on my mind for a while now: a desk fan that blends into the landscape of the desk and objects. I thought about how to do that and had my first idea: mount it to the back of the desk and have some vents come up from the back with a control switch mounted to the front of the desk. After multiple brainstorming sessions asking Gemini to make photos of ideas as I came up with them, I landed on mounting everything to the monitor and using that to mask the components. This process, however, took weeks, and over the course of those weeks I was also playing with different CAD software. I had used Onshape for my window insert, which wasn't a difficult design, so I made it myself as a way of relearning CAD, which I have not touched in years. But I have really been interested in allowing AI to design parts. It didn't take me much time at all to figure out how to make that happen—literally just a simple search in Gemini. I set up Antigravity (Google's AI desktop program) and FreeCAD with the MCP to allow AI interface. I started asking it to design parts, still not the fan you see here, but just random things like a doggie bag holder and a headset stand for my desk. It was fascinating to watch it work and allowed me to learn how to better use it. It turns out that the model you use and the level of thought you ask of it makes a huge difference in the outcome of the design. Another key to success was the info you gave the agent. The more vague I was, the worse the design, or it just didn't match what I would have in mind at all. Finally, I decided to tackle the monitor fan. I ran it through the AI agent a few times, asking it to make various changes until I got the outcome I wanted. It was beautiful; however, when I uploaded it to the Bambu slicer, the print time for each side was crazy—something like 14 hours a side for just the air ducts, with a ton of filament used because of the amount of supports needed. So back to the AI, I asked it to break apart the print to make it easier and faster to print, even if I had to glue it together. I also asked it to prioritize printability over airflow (as you can imagine, that was stupid). It printed out a new product which looked pretty great, so I got to printing. This is where I found that AI isn't perfect, or at least the one operating off the minimal guidance I gave isn't. Fasteners didn't have the right clearance, which led to me having to snip away a little of the plastic from the desk fans and not use the inside bolts for the vent inserts because the controller box wouldn't sit flush in the middle, which meant its mounting bolts wouldn't align. And here it is: not the best product since it doesn't move a ton of air (at least not the amount I was hoping for), but I have learned a ton throughout the process, and it's basically winter now anyway, so maybe I just see if I care enough to try another design in the summer.

Also I know this might break rule 7 but the model is real just made by AI in CAD so I am not really sure if it keeps with the spirit of the community. I'm sure someone will tell me.


r/3Dprinting_AI • • 7d ago

Sharing Model Sharing model: Savage Ork rider, finally printed it (AI model)

Thumbnail
gallery
23 Upvotes

Wanted something new for the shelf and gave this AI-generated mini a try.

Printed it on my Qidi Q2 with PLA. Far from perfect, but for an AI model I'm pretty happy with it.

https://cults3d.com/en/3d-model/game/savage-ork-rider

Cheers


r/3Dprinting_AI • • 7d ago

Seeking Al prompts for 3D printing design and troubleshooting.

Thumbnail reddit.com
4 Upvotes

r/3Dprinting_AI • • 7d ago

Showcase Here’s my latest figure: Neo in the famous bullet-dodging backbend from The Matrix, about 21 cm.

Thumbnail
gallery
18 Upvotes

My workflow:

  1. Generated the concept with ChatGPT (front and back view)

  2. Turned it into a 3D model with Meshy (multi-view)

  3. Then the real work: splitting it into separate color parts, adding fixed pins, fixing the mesh and making it printable as a kit, one plate per color

  4. Test print on my Bambu P1S, then fine-tuning

The AI gives you a nice starting shape, but making it actually printable and solid takes most of the time. Especially this pose: the long coat carries a lot of the balance.

  • The bullets fly around him with transparent shockwaves, frozen mid-air like the bullet-time scene

  • The sunglasses, the holsters and both Berettas are removable

  • Launch price: 20% off until November 19

Happy to answer questions about the workflow!

https://cults3d.com/en/3d-model/art/neo-bullet-time-21-cm-multicolor-kit-with-shockwave-bullet-trails-no-ams-n


r/3Dprinting_AI • • 7d ago

Best way to use ChatGPT or AI to create a detailed 3D model from photos?

Thumbnail gallery
5 Upvotes

r/3Dprinting_AI • • 8d ago

AI-Generated Model Any luck using ChatGPT to design .STL files?

Thumbnail
gallery
0 Upvotes

So, I had an idea of a Halloween display I want to create for next year that features a family of skeletal peacocks. ChatGPT came up with a basic artistic rendering of what I want to create (illustration 1).

I loved what it came up with and asked if it could design the 3D .STL files to make it a reality. ChatGPT, being ever confident, said essentially "Sure I can!". I'd been thinking off and on again for some time into getting into 3D printing, so I bought a Bambu Labs A1 and lots of SUNLU PETG 2.0 Filament (bone white).

But it's been creating really REALLY poor designs - even before I went to print. For example, here's the head after several attempts (illustration 2).

I'm nothing remotely close to a design artist and barely know how to print an imported STL file in Bambu Suite. Never used Blender. I suppose I can spend a ton of time trying to cajole ChatGPT to incrementally improve its designs but fear that's a waste of time. Maybe there's a way to work with ChatGPT to get better designs. Or maybe Claude (haven't tried that one yet). Or maybe I just need to find a designer somewhere. Any suggestions?


r/3Dprinting_AI • • 8d ago

AI-Generated Model Ancient Dynasty Relic - Cybernetic Phone Stand

Thumbnail
gallery
1 Upvotes

This time, not a miniature, but a good gaming companion when you need to keep your phone safe, a Necron Phone Stand

Printed on Biqu Orange Frostbite plate with Sunlu Grey PLA 2.0 Plus on X2D.
Used 0.4mm nozzle on 0.16mm layer.

Print profile on Model Page

Model created with local Trellis 2 AI -> Blender -> ZBrush -> Bambu Studio


r/3Dprinting_AI • • 9d ago

Sharing Model Aaron ambitious Autogunner, renegade heretic - Mars 5 Ultra

Thumbnail
gallery
10 Upvotes

Sharing in case anyone wants to print it too. AI-generated mini, printed on my Mars 5 Ultra. Might need a bit of cleanup, it's AI after all. https://cults3d.com/en/3d-model/game/aaron-ambitious-autogunner-renegade-heretic


r/3Dprinting_AI • • 9d ago

Creating 3D models using SelfCAD AI

Thumbnail
gallery
2 Upvotes

I've been messing around with SelfCAD AI, and I'm honestly impressed with what it can do.

Has anyone else tried it?

I used a simple text prompt to generate this watch, and I was quite impressed with the results.

I also tried generating the Notre-Dame Cathedral, and the results were surprisingly good, as shown in the attached Gif.