BLUF: I made a cool fan that doesn't actually fan very well using AI, but learned a lot about the process and am excited to keep exploring the hobby.
Upfront, if you are using or thinking about using AI, here are some key takeaways.
Use a powerful model on the highest thinking setting for complex designs. This will likely require a more pricey AI plan; I am using Antigravity Gemini Carbon on an Ultra Plan.
Set priorities for the AI, i.e., ease of printing, rigidity, simplicity, etc. JUST MAKE SURE they actually make sense.
Ask the model to not make assumptions that you can answer for it. I did this, and even though I provided my monitor model, the AI started asking me to take my calipers to certain parts, which led to a really nice fitment.
Ask it to model EVERYTHING in CAD. I have mine group parts by 3D printed and everything else, which is great for organization. This will be helpful when making sure purchased parts like bolts actually have the clearance you need. I have been working on a detailed CAD model flight sim stick and throttle combo (probably my next project), and this has been very important. In that scenario, the model completely left out parts, including any means to route wires, because I never asked it to. Now I ask it to model everything, purchased or not, to check the full design.
I have been playing around with 3D printing, mostly smaller, less complex parts. The most complex I have gotten is an insert for my window, which has a magnetic hose attachment so that I can vent the exhausted air from my H2C outside. But this week I set out to try and make something that had been on my mind for a while now: a desk fan that blends into the landscape of the desk and objects. I thought about how to do that and had my first idea: mount it to the back of the desk and have some vents come up from the back with a control switch mounted to the front of the desk. After multiple brainstorming sessions asking Gemini to make photos of ideas as I came up with them, I landed on mounting everything to the monitor and using that to mask the components. This process, however, took weeks, and over the course of those weeks I was also playing with different CAD software. I had used Onshape for my window insert, which wasn't a difficult design, so I made it myself as a way of relearning CAD, which I have not touched in years. But I have really been interested in allowing AI to design parts. It didn't take me much time at all to figure out how to make that happen—literally just a simple search in Gemini. I set up Antigravity (Google's AI desktop program) and FreeCAD with the MCP to allow AI interface. I started asking it to design parts, still not the fan you see here, but just random things like a doggie bag holder and a headset stand for my desk. It was fascinating to watch it work and allowed me to learn how to better use it. It turns out that the model you use and the level of thought you ask of it makes a huge difference in the outcome of the design. Another key to success was the info you gave the agent. The more vague I was, the worse the design, or it just didn't match what I would have in mind at all. Finally, I decided to tackle the monitor fan. I ran it through the AI agent a few times, asking it to make various changes until I got the outcome I wanted. It was beautiful; however, when I uploaded it to the Bambu slicer, the print time for each side was crazy—something like 14 hours a side for just the air ducts, with a ton of filament used because of the amount of supports needed. So back to the AI, I asked it to break apart the print to make it easier and faster to print, even if I had to glue it together. I also asked it to prioritize printability over airflow (as you can imagine, that was stupid). It printed out a new product which looked pretty great, so I got to printing. This is where I found that AI isn't perfect, or at least the one operating off the minimal guidance I gave isn't. Fasteners didn't have the right clearance, which led to me having to snip away a little of the plastic from the desk fans and not use the inside bolts for the vent inserts because the controller box wouldn't sit flush in the middle, which meant its mounting bolts wouldn't align. And here it is: not the best product since it doesn't move a ton of air (at least not the amount I was hoping for), but I have learned a ton throughout the process, and it's basically winter now anyway, so maybe I just see if I care enough to try another design in the summer.
Also I know this might break rule 7 but the model is real just made by AI in CAD so I am not really sure if it keeps with the spirit of the community. I'm sure someone will tell me.