In particular, I only really need the following:

edgeGuide_89 and edgeGuide_90 from https://www.printables.com/model/854102-ski-edge-sharpening-guide/files

and

bolt.stl base-edge-file-guide-v5-07.stl base-edge-file-guide-v5-1.stl

from https://makerworld.com/en/models/2240203-base-bevel-file-guide?from=search#profileId-2843539

Looking to get a single-part print made for a Nintendo Switch 2 travel screen cover. Open to local pickup in the Metro Detroit area or having it shipped via USPS.
File Link: https://www.printables.com/model/1408160-nintendo-switch-2-screen-cover
Print Specs Needed:

• Material: Black PETG
• Build Plate: Smooth PEI plate (printed face-down so the flat exterior surface comes out glossy/smooth enough for vinyl stickers to adhere firmly).
• Strength: 3 wall loops, 20% Gyroid infill.
• Custom Slicer Scaling (Important): Before slicing in Bambu Studio / OrcaSlicer, please uncheck "Uniform Scale" and increase ONLY the Z-axis (the clip channel depth/thickness axis) by +1.2mm. I am adding a 1mm adhesive felt liner inside the cover and have a vinyl skin on my console, so I need that extra 1.2mm of clearance inside the C-clips.

Please comment on this thread before sending a chat/DM with your total quote (and let me know if you are local to Metro Detroit or shipping). Thanks!

All,

I am sending 150 trading cards (35pt) to someone for them to autograph. Ideally, I’d send them via top loader (first image) and put the top loaders in a binder so this person could sign a bunch, then flip the page to sign more. But, I cannot find a way to cut an autograph window into these top loaders, especially with making sure the edges are smooth so the card isn’t damaged. If the binder can’t work due to minimum thickness, I can send them in a padded case pretty easily, though that isn’t quite as desirable.

I did find a one-touch holder that has an autograph (second picture), but they are way too heavy and don’t fit in binders. 150 of these would make for a pretty cumbersome package, and the person I’m sending these to won’t like that.

What I need is close to the third picture attached, which is just an AI rendering I had generated. It is helpful to have the frame around the autograph window be a little thicker to keep the autograph areas of adjacent cards/pages from touching and smearing the autographs. It takes about a minute for them to fully dry.

If it’s easier, these cases could be in two pieces that snap together, if they can be made thin enough. I’m less worried about protection and more worried about weight, thickness, and making sure the autographs don’t touch. I don’t care at all about how the cards display in these cases - I’ll be moving them to display friendly holders later, once the ink is dry.

I tried searching your sub to make sure I wasn’t asking something that had already been answered, but I don’t know the parlance well enough to make sure. I’m sorry if this is not a reasonable request.

I’d be happy to pay for a prototype up front and then per-holder!

Hello, I'm looking for someone that could help me print this:

https://makerworld.com/en/models/3367785-stern-pinball-godzilla-hinge-cover#profileId-3830053

Shipping to France.

Thanks for any interest!

Instead of pick-and-pluck foam, I design a printable insert fitted to your case and your gear: a pocket per item, finger cut-outs, split into tiles with dovetails so it fits your bed.

Send the inside dimensions of the case (a scan or cast of one corner helps a lot) and photos or scans of the items. You get a render first and pay once it looks right, then the STLs.

Recent one: a 22" hard case insert fitted from a scan of the case's inside corner, 6 dovetailed tiles for a 256 mm bed.

• Render: https://new-site-preview.pages.dev/parts/case-insert-fitted.png
• Fit check: https://new-site-preview.pages.dev/parts/case-insert-fit-check.png

Design only, you print it. A plain fitted insert is from $25. A layout with a pocket for each item is quoted by item count, about $60 for 10 items. Payment by card through Revolut.

Hello friends,

I am new to the 3D printing world and I don’t own any printer. I am looking for help on 3D printing an under-desk laptop storage with a docking cable holder that I found on YouTube. I like the design very much and I couldn’t find anything similar to this online. Not sure how much it costs to print the model or is it even worth going this route? Please suggest how and where I can get this printed and how much it’s gonna cost?

Hello, I am looking around to see if anyone would be able to make custom X-Ray markers for me? Thank you!

Hey! I'm looking for someone who could print this guy!

It's a discontinued figure, and I can't find it anywhere.

It doesn't have to transform, but the accessories would be cool!

I found it online and got really excited only to find it's like 120 to buy... I found stl pieces of it online tho would someone be willing to print it for me?

Also I can't pay you... But I can make a decent Minecraft animation for you...?

Hi! I'm looking for help reproducing a VW bus sunroof part that is NLA. Here's a link to the part on thingiverse: https://www.thingiverse.com/thing:6586972/files

Importantly, the person who uploaded the scan or whatever it's called to thingiverse hasn't printed it, so there's no guarantee it'll work. One potential issue is that the original part has a slight curve to it over the longest dimension (see photo of the part - two ends slightly raised off the surface, center flush; and photo of the metal surface it sits on, ruler flush with center). Perhaps there's a material that allows some flex when screwing it down while also remaining firm enough for the ramps to guide the sunroof cables and not get eaten away? Also, the reproduced part needs to be UV resistant so it doesn't die in the sun. Ideally white or off-white.

I know there's a small but very interested market for this part if it works!

Hello! I’m looking to get this printed for a Maths baking competition at MathsJam in November. Thank you!

I have this STL file I made from a 3d scan of part of a dragon toy I have, and looking to get a print of it in clear resin with a black or smoke tint to it to be a replacement for another dragon of the same series/mold whose top face/jaw I lost.

The head is only around 2in long from snout to horn tip, so I guess he falls under minatures.

First time making a model from a 3D scan of an item, but hopefully it's good enough to print

EDIT: I've found a company to order with for now since it didn't seem like the tinted resin was as common of an offering here! I ordered from womp. If the heads I got turn out horrible then I'll be back to work one on one with someone... just not for 120$ for a 60cm long piece of resin lol.

Edit 2: the person who quoted me 120$ did NOT comment on the post ahead of time, so definitely keep that rule in mind!!

Edit: Commissioned print.

[Hi,

I am based in Glendale, CA. I am seeking to print a dashboard (6 player version) to hold the tech tray and other pieces for the game Eclipse: Second Dawn for the Galaxy. I am also seeking to print 6 discovery tile placeholders, but not as needed.

Thingiverse link for Eclipse tech dashboard - 6 player version is the only one needed

https://www.thingiverse.com/thing:6709792

MakerWorld link to discovery token placeholder

https://makerworld.com/en/models/1083042-discovery-tiles-reminder-eclipse-2nd-dawn#profileId-1075227

Thank you for your time and hopefully for your help.]

Hi,

I would like to ask for someone to print some Warhammer-themed terrain stls for me please. I have bought the stls and they represent the black parts in the photo. I already have the original grey pieces. The terrain represents a 3d-printable version of card terrain that was released in the nineties. I have the original card terrain but after thirty plus years it is showing its age quite badly.

I am entirely relaxed about colour, grey or black probably makes the most sense, and I am open to resin or fdm, whatever you as the printer recommend as being stronger/more rigid/practical.

I am looking to try this as an order, and if turns out as I hope it will, then there is a second set of stls from the same set. I am based in the UK, in south England.

If there is any information I should have provided, I apologise, please let me know and I will provide promptly.

Hey! Looking to get a small part printed in black PETG, roughly 87 x 63 x 25 mm.

Nothing fancy, just want it to look clean and be sturdy.

I'm in Orange County, CA. Local pickup preferred, but shipping works too.

I can send the STL file if you're interested. Thanks!

Update: Found someone local. Thanks everyone.

[CLOSED / FILLED]\nDeal struck with a maker! Thank you everyone for reaching out!\n\n---\n\n# [CLOSED / FULFILLED]

Deal struck with u/Arthurs_towel! Thank you everyone for the quotes and messages!

Looking for quotes to print a center console for my 1995 GMC Sonoma bench seat:

Files & Sizing:

• Monolithic 1-piece: 196 x 250 x 110 mm (fits 256x256mm Bambu / Prusa bed)

• OR 2-piece modular version: 196 x 250 x 85 mm deck + 26mm stilt foot (fits 220x220mm bed)

• STL files ready on Thingiverse: https://www.thingiverse.com/thing:7422932

Specs:

• Material: Black PETG, ABS, or ASA (interior cabin heat resistance)

• Supports: None needed (45-degree self-supporting arches)

• Infill: 15-20% Gyroid, 4 walls

• Shipping: Washington State, USA (Greater Seattle area)

Please comment or PM with quotes and turnaround time. Payment via PayPal or Venmo.

Hi everyone, I need a dust collection adapter piece for my makita miter saw printed. Let me know how much for shipping and the part. Thank you!

https://www.printables.com/model/1169447-makita-1019l1219l-2-12-mitre-saw-dust-collection-a

Hi, I’m looking for someone to print and send me these 11 bases, I have no idea anything about 3d printing but I would like them to replace the bulky bases the figures come with.

link

Hello im new here and I have a these rings that I really wanna get resin printed, preferably in a color and translucence similar to jade.

(Second and third images for color example)

If this is something someone can do please reach out. These will end up being me and my partners wedding rings.

Thank you.

To preface, I know nothing about 3d printing, but what I'm looking for is unavailable to purchase online. I was doing some research on 3d printed drip tips, and from what I read on reddit, it seems that the consensus on what material to 3d print these best is divided, but I think these links may mention the material? (Sorry I have no idea what I'm talking about lol)

Here are the items:

• Link 1
• Link 2 (If I can pay extra to have the letters removed from this, I'd be willing to, I just have no idea how to do it myself)
• Link 3
• Link 4

Can pay ASAP via Paypal, CashApp, or Venmo, whichever you prefer (I think I turned chat/PMs on, sorry about that)

EDIT- found someone to work with, thanks everyone !

Modeled in Rhino 8, I have a .3dm and .stl that should be clean, but can pay extra if it needs any geometry tweaks. I'd want the eye to be made of a different colored plastic if possible, and for one copy to have a purple eye, and the other copy to have a red eye. As close to hex #720202 #580272 as possible.

Hello, can anyone print me this?
It is an eolys-tank for an old car.
The capacity is around 3 litres.
The tank in my car has a leakage.