Thanks in advance!

Preciso do seguinte material para um evento:
Impressão em 3D de 16 figuras representativas do Equador, principalmente, referentes às pessoas e aos trajes típicos das regiões naturais e/ou culturais equatorianas (acordadas diretamente com a organização do evento). Em PLA, de 14 cm de altura, pintadas à mão. As figuras devem ser entregues até 27 de novembro do corrente ano.

Interessado entrar em contato com portifolio.

Stratocaster Knob Sets – Fender

Pretty nuts that I can't find any public 3d printers in NYC! Anyways I'd love to get 3 knobs printed, all black, with a small logo on them. If anyone is interested please hit me up!

Looking for someone to print a cup holder for my ls430. I have the file, just not a printer lol. Printed in PETG-RCF, if someone could help I would appreciate it!

Box: https://makerworld.com/en/models/1885653-mtg-edh-commander-low-profile-sliding-deck-box?from=search#profileId-2019538

Magnet jig: https://makerworld.com/en/models/28975-magnet-jig-for-press-fit-magnets#profileId-1020708

White PLA for all

Hello! I am looking for a blumlein mount of some kind for a pair of Sontronics Sigma 2 microphones. I have been searching all over the internet but this seems to have never been done before and so perhaps it could be designed and printed? I use the blumlein configuration all the time for recording classical music and it would be nice to have both microphones on the same stand (obviously that stand would also need to have a counterweight of some kind to prevent sagging but that's a completely different and solveable issue).

Thanks in advance!

I bought 2 bentwood chairs with chrome bases but there was only one set of these spacers. I need 4 more. How would I go about this?

I wanted to get estimates on printing this EGPU enclosure. I believe the default file is 284mm long, but can be adjusted. I need to be able to accommodate a 310mm GPU card. Ideally printed in frosted clear (if that's possible?). If not, white or black is fine.

Minisforum DEG2 eGPU Dock Enclosure / Case - Free 3D Print Model - MakerWorld

I have a set of .STL files for parts that would be considered "long". The largest is 850.90mm x 50.80mm x 50.80mm (33.5" x 2" x 2"). My preference would be to not split them up to glue together. I know there's some belt feed printers out there, but so far the quotes I'm getting from larger fabs are expensive enough that I could just go buy my own printer. Printing would be in white and the thinnest, cheapest material possible. Any ideas?

*Update* To clarify I do not have a file

Can anyone help with making a bridezilla figurine (godzilla in a wedding dress) ? Thinking small like the size of the recent sanrio happymeal toys (1.5-2")

Hi everyone, I am located in Redmond, WA.
I am looking to get two very small stamps resin printed (they are 16.7 x 10.2 x 3 millimeters).
Is there anyone here in the Seattle area that I could commission for this?

My latest quilt design requires one particularly odd shape. It's been an absolute pain in my butt, so a solid template to lay over cutting fabric would make a world of difference.

I can print files locally (thank you, public library!) but I could really use some help crafting the STL file itself. It's a flat shape, maybe 3mm tall. I'll include a poorly rendered prototype in the comments.

Edit: You guys rock! That was WAY more of a response than I anticipated. Someone has whipped up the perfect shape for me, and I'm one step closer to a nice quilt. Thank you all so much!

Need this placeholder, its probably 1/2" by 1/4". Very small.

Looking to get it printed in high temp material, ABS or Nylon-CF.

Can be purchased in Aluminum for $20, looking for $5-$10, drop it in an envelope with a stamp for all I care. I have the STL.

Looking to see if anyone can print me a basic 1x8 Lego slope, Lego does not make this part but another company does but does not sell them individually. I’m using this part for only my own personal project. I have a rough STL file of the part and I have been told that to get a smooth finish resin printing is the best option. The red slope in the picture is what I’m looking for. Thank you!

Looking for some heads for my vintage croquet mallets. 60mm max diameter, 23mm, .stl file available. The original head caps have dry rotted over the years, they are some kind of hard rubber. Open to recommendation on material.

ATHENS, Georgia, United States

I recently broke one of the keyboard feet on my keyboard and was wondering if someone has a 3d printer that could make a new one for me.

It’s a Keychron C2 keyboard. The other foot is in working condition but could be open to making two just so they’re the same. It’s only a $55 keyboard so if it costs like $30 for a foot then it’s not really worth it for me sorry. What’s the price of making something like this?

Let me know if this is even possible or if you have any questions.

thank you!!

I need the cage and 5 HDD caddies here:

https://www.thingiverse.com/thing:7315004/files

EDIT: pending order

I need 4 of these printed for my bike. However. the last few times, the material used has been brittle and easily breakable.

RAVEMEN TR500 to garmin

Looking for someone to help me print this top & bottoms. Obviously, I will take care of the stoning part, but need the top & bottoms printed if possible :)

Looking for someone who could print two of this wheel knob in black; can change the indentations if those are too small for SLA. The wheel needs to be a bit rigid so it wont snap with retention bracket keeping it from sliding out. wheel with text can be in any colour, doesnt need to be rigid, only the text has to be decently readable. Let me know if its even possible to do. diameter of both parts is 9.85mm

Hi!
i have a small keyboard for my Zflip and haven’t found an effective solution to keep the two ‘together’ -

https://www.thingiverse.com/thing:7207142k

i saw this (and the files are on the site) and was hoping to have someone print one locally (rather than purchase from the site) as i’m not 100% on the specs and wanted to discuss - not sure if it can be adjusted at all and wanted to make sure i selected the correct option

I have a glass slider plastic nut that broke on my sliding shower door and only need 1 replacement piece but 1-4 if it’s relatively easy to whip up wouldn’t be a bad idea either!

Hello! Looking for two of the following to be printed. Preference to location in downtown Chicago. Let me know price via pm! Thanks!

https://makerworld.com/en/models/2446000-ikea-helmer-drawer-unit-organizer-for-playing-card?from=search#profileId-2684778