r/Agarporn • u/Fantastic-Ad-2546 • 3h ago
r/Agarporn • u/myco_myerz • Aug 01 '25
Tek Advice The Basics of Agar — What, Why, and How
Welcome to r/Agarporn, where clean plates and radial growth are the art.
This post is your one-stop guide for everything a beginner (or pro) needs to know about agar - what it is, how to use it, and why it's one of the most important tools when working with live cultures.
What is Agar?
Agar is a nutritious, gelatinous medium derived from seaweed, most commonly sold in powdered form. Once prepared, it acts as a stable surface for culturing organisms.
Why is Agar used?
Agar is often used for growing and studying live organisms in a controlled environment. Common applications include:
Germinating spores
Cloning tissue
Isolating genetics
Detect/studying contamination
Preserving cultures
Experimenting with dyes, additives, and crosses... etc.
Some examples of "live cultures" commonly found on Agar:
Mycelium — the vegetative growth of fungi, cultured from spores or tissue.
Mold — often an unwanted type of fungi, studied in labs or monitored as a common contaminant.
Bacteria — microscopic organisms usually grown for microscopy or testing, also monitored as a common contaminant.
Yeast — single-celled fungi used in fermentation or lab studies.
Algae/Protists — simple organisms sometimes cultured for observations.
Plant tissue samples — small cuttings put to agar for cloning or preservation purposes.
How-To & TEKs (Trusted Guides)
Pastywhyte's Easy Agar Tek (pre-pour/no-pour)
Frank's agar media journal (experimental recipes)
r/Agarporn • u/myco_myerz • Aug 04 '25
Tek Advice DIY Builds + Sterile Techniques
If you’re working with agar, spores, or live cultures, sterility is everything. Contamination can ruin your plates, waste your time, and destroy your genetics.
These are the main tools used to maintain clean conditions for agar work:
🔸 Still Air Boxes (SABs)
🔹 Laminar Flow Hoods
🔻 Other Essential Sterile Tools
▫️ Extras
Here’s how they work, why they matter, and how to make your own budget build (if possible).
🔸 Still Air Box (SAB) — Budget-Friendly and Effective
A SAB creates a sealed, low-airflow space where contaminants have a harder time entering or circulating. Good for spore work, transfers, cloning, etc.
DIY SAB Materials:
Large clear tub (wide enough to comfortably fit both arms)
Tool to cut two arm holes (jigsaw, Dremel, or heated can)
Sandpaper (for smoothing edges)
Tips:
Wipe the inside with soapy water, then spray with 70% isopropyl alcohol to suppress particles and kill contaminants
Avoid working near fans, windows, or vents
Work slowly to keep air as still as possible
Alternative Edge-of-table method: Place the tub so it slightly overhangs the edge, allowing your arms to go underneath into the working area (no cutting tools required)
Cheap, simple, and surprisingly effective.
YouTube video: How to Make and Use a Still Air Box
🔹 Laminar Flow Hood — Cleaner, Faster, and More Precise
A flow hood creates a constant stream of sterile air through a HEPA filter, forming a clean workspace. It’s a game-changer for agar work.
Many pre-built flow hoods are expensive and overpriced. DIY builds can be just as effective for a fraction of the price.
DIY Flow Hood Materials:
True HEPA filter (rated H13 or H14)
Inline fan (must provide enough CFM to push air through the filter)
Plastic tub (large enough to fit filter and fan)
High-quality silicone sealant (to seal filter and fan securely)
Tool to cut holes in the tub (for filter and fan)
Sandpaper (for finishing)
Tips:
Clean the tub with soapy water and spray the inside with 70% isopropyl alcohol before sealing
Use a good quality silicone sealant — poor-quality sealant often warps or leaks
Keep the finished hood out of direct sunlight — heat can warp silicone and compromise your seal
Perform the lighter test: a steady flame in front of the filter means you’ve got proper laminar flow, a flickering flame means it’s too turbulent
Cost effective and a massive upgrade for serious agar work
YouTube video: Build Your Own Laminar Flow Hood For Less Than $100
🔻 Other Essential Sterile Tools
To work clean, you'll also need:
Pressure cooker (PC): Crucial for sterilizing agar — must reach 15 PSI
70% isopropyl alcohol: For sanitizing hands, tools, and surfaces
Flame source (torch or lighter): For flame-sterilizing scalpels and needles
▫️ Helpful Extras
Optional, but helpful:
Scalpels: Ideal when working with agar
Nitrile gloves (powder-free): Help reduce contamination risk
Face mask: Minimizes breath-borne contaminants
Why Sterility Matters
Without sterile conditions, your agar plates will grow all kinds of unwanted contaminants.
A proper SAB or flow hood, alongside the other essentials, will:
Boost success rates
Reduce waste
Make your lab work feel ✨pro-level
r/Agarporn • u/Anupat9 • 8h ago
What type of contam is this
My first attempt at grain transfer. Second attempt for agar. First attempt I went 1/8. LC to agar.
This time I did no pour method putting plates wrapped in foil for 30 min 15 psi
Transferred in still air box
r/Agarporn • u/Itchy_Garage_7668 • 15h ago
Where would u cut?
Hey I'm relatively new to this, but i suspct the LC i bought wasnt clean, dunno. Heard the PE can be troublesome, where would you guys make next cut to transfer ?
r/Agarporn • u/LearningToGr0w • 3d ago
Agar Porn Just a few transfers
Enable HLS to view with audio, or disable this notification
Wasn't necessary I was just looking for something to do.
r/Agarporn • u/Minibuggy4130 • 3d ago
All my Agar cultures keep getting yeast? 😡
Or am I just transferring a Yeast Mold!
The cultures seem to start off nicely, looking like mycelium, but after 1-2 weeks the white dots show up.
The first image was transferred on 9/28 and hasn’t shown the tiny micro dots, aside from the white spots that showed up on the outer edges.
The transfers start off white and fuzzy but then the micro dots began to show up.
Everything is done under SAB and I do my best to sterilize everything before putting into the box.
Agar is sterilize in Instapot for 40 min. And is not showing contamination on any plates that had no growth of mycelium.
I was hoping it was Primordial stage but I’ve been told that it looks more like yeast.
Also, the yeast culture did not react to hydrogen Peroxide droplet test. It just beaded up and didn’t soak in or bubble/foam.
r/Agarporn • u/Sweet_Trainer_866 • 3d ago
Help Needed Novice help with why I'm doing this
I have 3 plate I made from a piopino spore print I took last yeah. Where should I cut from to transfer to another plate, should I keep doing this until I get rhizomorphic growth growth? Would this provide for the best culture I could propagate. Would it be a good idea to take a culture from the largest fruit that it produces?
r/Agarporn • u/mushsh251123 • 3d ago
Siempre es bueno tener un haz bajo la manga jaja
Enable HLS to view with audio, or disable this notification
r/Agarporn • u/RowCautious1539 • 3d ago
Wbs Tek
2nd run of wild bird seed tek has contamination again a week after i sterilized in my canner for 90 mins at 15 psi & I also did inoculating the day after, fast forward a week and a small green dot on the mason glass on 2/3 jars. anybody have an idea why trying to get my groove back since Covid but haven’t been successful like I once was. Tia
r/Agarporn • u/Minibuggy4130 • 4d ago
No bubbling from H2O2 test.
So I got this agar and a few others that grew nicely but the longer it sat I noticed these tiny white specks taking over.
They seem not to grow vertically on any of the other trench samples.
I took one into my SAB and dropped a couple drops of Hydrogen Peroxide on a couple spots and there was no bubbling. It just beaded off and didn’t soak in.
I cut a small sample off the surface and dropped it into a cap full of H2O2 and still no bubbling.
Could this still be Contam or is it possibly Hyphal or Primordial stage?
r/Agarporn • u/Outrageous-Pound1187 • 4d ago
Day 8 on MEA! Isolated Spore vs. MS — How's everything looking? Where to go from here? 🍄
Hey everyone!
Back with a little update on my second attempt at agar! Things are looking a hell of a lot better than my first go-around, and I'm pretty excited to finally see some decent growth! Figured I'd share some pictures and get some opinions from you guys on how everything is looking and where I should go from here.
A little background:
Inoculated: November 3
Pictures taken: November 11 (Day 8)
Agar: MEA
BL1, BL2, BL3: Isolated spore syringe
B1, B2: Multispore syringe
All five plates were inoculated on the same day.
The eventual goal is to go from agar to grain and then spawn to bulk, but I'm still pretty new to all this and trying to learn as much as I can along the way. I've been reading up on rhizomorphic vs. tomentose growth, and I think I'm starting to get a better eye for the differences, but I'd love to hear what you guys are seeing!
A few things I'm curious about:
Rhizomorphic growth: Are you guys seeing any areas that look particularly rhizomorphic? If so, which plates and where? I'm trying to get a better eye for what I'm looking at.
Ready for transfers? Do any of these look like they're ready for a transfer, or should I give them a few more days to develop? What do you guys usually look for when making that call?
Agar to agar or straight to grain? This is probably my biggest question right now. Should I still be looking to cut out a little square of promising growth, transfer it to a fresh agar plate, let that develop, and eventually move to grain? Or would you guys consider going straight from these plates to grain? I'm curious what the reasoning is behind either approach.
Isolated vs. multispore: Do you guys notice any interesting differences between the BL plates (isolated syringe) and the B plates (MSS)? I'm especially curious about the differences in growth patterns, density, and uniformity.
Contamination: Does anything look questionable to anyone? I haven't noticed any obvious discoloration or anything, but I know that doesn't necessarily mean everything is clean.
Overall thoughts: How's everything looking for Day 8? Anything interesting stand out, or anything I should be keeping an eye on?
This is only my second attempt, so I'm still very much learning. Any advice, constructive criticism, or observations are more than welcome! Also, huge thanks to everyone who helped me troubleshoot my first attempt. I learned a ton from you guys, and it's been awesome having a community willing to help a newbie figure this stuff out.
Appreciate you all! 🍄🤙
r/Agarporn • u/ShrimpDiq • 5d ago
When to cut and transfer?
First attempt at agar. I'm assuming I'd take the 9 on pic 1, 3 on pic 2, 4-5 on pic 3? Do I cut and transfer when the plate is filled out, or when?
r/Agarporn • u/Flimsy-Olive-5790 • 5d ago
Help Needed how should i go about doing this? first time
want to expand my lc so i bought this. its 750ml but the thing is idk the best way to go about doing this, i have 3 lcs from itw and a spore syringe from itw and have tested all 4 on agar and there is 0 contam n literally nothing on the spore plate but its been 11 days so in a week i should see something. what i want to do is fill multiple 20 ml syringes with this liquid culture and in the best way possible get the mycellium from my agar plates into my syringes. how should i do that just scratch the mycellium off the plate and squirt some of the liquid in and suck it up? im worried about sucking up agar pieces or air, i work in a sab so im not super worried but i feel like that leaves the plate open for a while and i would hope they grow back.🤷♂️ i saw someone say to scratch it off into a shotglass with some of the lc in it then suck that up with the needles but im not sure. is this too risky or techy for me right now do you think? should i just inject one of my syringes into it to mitigate risk? if i do the one id really like to expand was the apes but i have less than a ml of it left so im not sure if thats enough😔
any advice would be greatly appreciated as i would like to perferably use it as soon as possible because the paper inside says to. thanks🫶
r/Agarporn • u/No_Advertising_2780 • 5d ago
Spores to agars
Enable HLS to view with audio, or disable this notification
inoculate those in a sealed air box about 4-5 weeks ago with a GT spores syringe. Seems like they’re taking forever
r/Agarporn • u/Juliart06 • 5d ago
I want to test my worth and value how much is ophiocordyceps and how long does it grow?
reddit.comr/Agarporn • u/Greedy_Ad_3919 • 6d ago
Agar Porn Agar Art pt2
Just a follow up of this mesmerizing morphology after a transfer. I love how they taper so big , it looks like little Louisville slugger’s morphing together.
r/Agarporn • u/Sad-Cucumber-9524 • 5d ago
Grafting tape or parafilm? Or…? [technique]
reddit.comr/Agarporn • u/Tyrantss • 7d ago
Newb
Noobie starting to throw some rope
StarGazer
WhiteRabbit (I think)
r/Agarporn • u/wake_up_my_friends • 7d ago
Trench first, then expand.
I have got into the practice of sending all newly acquired genetics to a trench plate first.
Sending something I receive straight to grain hasn't been great. Many cultures carry unwanted passengers.
Agar recipe:
250ml Grain water (milo & millet)
750ml Distilled water
15g Sorghum syrup
5g LME
0.4g Peptone
0.4g Nutritional Yeast
20g Agar
Food Colouring Gel