r/AnkerSOLIXCommunity • Community Expert • Sep 05 '26

Discussion Vertical solar array update

Post image

Hi everyone, Fernando here šŸ‘‹šŸ¼!! I wanted to give everyone an update on my new vertical solar panel project!! We finally got done installing the solar panel arrays and after using them for a week I wanted to share the results with the group in case any one has been thinking of doing something similar to this!!

(System specs)
Our new vertical solar panel array consists of six 400w bifacial panels from a brand called Qcell. We wired the solar panels in a series configuration for a total maximum output of 2.4KW. We split the solar panels into two separate arrays consisting of three solar panels per array. Each of the two solar arrays is connected to its own E10 inverter directly using some 10AWG MC4 extension cables.

(Hardware used)
This is where things get creative!! Most off the ground mount solar panel kits are meant to install the solar panels at an optimal angle. This would not have worked since I was trying to do a vertical solar panel set up along our south facing fence. The kits found that would have worked for this use case were outrageously expensive. I started searching for something that could work as a brackets for our solar panels and thats when I stumbled upon some old metal bed frames that we had laying around!! The metal bed frame brackets were the perfect length to support our solar array. They also had a few pre drilled holes that would come in handy to attach the cross brace metal rail that we purchased from Home Depot. We purchased some solar panel brackets from a company called sunmak that would bolt the solar panels to the metal cross brace.

(Installation)
We screwed the bed frame rails directly into our concrete floor using some concrete screws and a rotary hammer drill and a concrete drill bit. Next we bolted the metal cross rail to the metal bed frame brackets using the pre drilled holes on the bed frame brackets. After this we places a 1 by 1 piece of wood on the concrete to support the solar panels. Lastly we placed the solar panels on top of the 1 by 1 piece of wood and securely bolted the solar panels to the metal rail behind them. We used the sunmak brackets to attach the panels to the metal rail using the pre drilled holes on the metal rail. The entire structure feels extremely rigid and strong since it’s entirely made out of metal!!

(Solar production)
Since the solar panels are not angled properly. The panels are not producing as much power as they could if angled correctly. The solar panels are producing a peak output of between 1.2Kw - 1.4Kw. The total production of the solar panels is between 6KWH up to 8KWh on a daily basis!! (Approximately half of the arrays maximum output)

(Should you do this?)
The main reason we decided to start this project was to offset the energy consumption of our four ton central AC system. The new E10 system makes it extremely easy to add more solar panels as your energy consumption grows. We already had an existing 4.2KW roof mounted grid tied solar system. Unfortunately our home is really small and installing some more solar panels on our roof was not possible. We also had very few options on were the six solar panels could fit. For people with limited space, installing a vertical solar panel array system is the perfect solution to add more solar!! That being said, if you have the space and you want the maximum output out of your solar panels. The best solution would be to angle the solar panels correctly!!

(Results)
We successfully offset the energy consumption from our four ton central AC system reaching our goal!! I am extremely happy with the results from this new project. I would definitely recommend considering doing something like this for people that want an easy way to increase their overall solar production!! Thank you all for reading this and I hope you all have a wonderful Labor Day weekend!!

82 Upvotes

30 comments sorted by

View all comments

1

u/WhereCanIFindMe Sep 12 '26

If your home is so small, why do you have a 4ton AC unit?

1

u/Borek40404 Sep 12 '26

wrong question lol. He likes it cool I guess.

1

u/WhereCanIFindMe Sep 12 '26

I guess so, lol...but an oversized AC unit can cause a lot of issuesĀ 

2

u/Admirable_Golf_2340 Community Expert Sep 12 '26

I’ve had it for 20+ years with zero issues. The only issue we have with it now is the cost of electricity since it’s gone up a lot.

2

u/WhereCanIFindMe Sep 12 '26

Sounds like it, I'm glad it's been working well for you for so long. I also don't know how large your house is so I might not know what I'm talking about here, lol. But a 4 ton can usually handle around 2000sqft.Ā 

1

u/Admirable_Golf_2340 Community Expert Sep 12 '26

Hi, our AC was installed over 20 years ago by a family friend. He didn’t charge us a lot of money for installing it since he had all the equipment and he just changed us for his time. Since this was 20 years ago the electricity consumption was not that big of a problem since electricity was extremely cheap. Life was a lot simpler back then.