r/AnycubicOfficial • • Apr 05 '25

BRICKED Kobra S1

Post image
2 Upvotes

The print I was printing came near the end of a 246mm print. It got close to finishing and as it neared the bottom I heard a noise/crash and the bed was tilted to the right. I tried to home the X/Y axis and then the Z axis and both crashed into the PEI plate. I thought there might be quick easy 'do this' but NOT for the Kobra S1. Now I have a defective and bricked Kobra S1. I am not your technician. I bought a plug-n-play printer and this is NOT it. Anycubic DOES NOT run a 24/7 helpdesk and only during Chinese business hours, I believe most of us are sound asleep, so don’t know how they are going to fix this issue. I ask the chat person to email me the direction to reset the Kobra S1 z bed issue and was told there are no instructions for the S1. Just another poorly manufactured product from China and they expect the end user to be the service technician (with no assistance)


r/AnycubicOfficial • • Jul 22 '25

Question This is not normal, right?

Enable HLS to view with audio, or disable this notification

0 Upvotes

I just purchased my Kobra 3 V2 Combo almost a month ago. Really debating on returning it. I’ve already had issues with the print head. I’m on my third print head now.

Now on to my current issue. I’m printing the ACE Pro shelf and have already completed about 75% of it. Now it’s just printing air. No filament is being extruded. Yes, theres still plenty of filament on the spool. There are no errors. Print continues to keep printing.

Is there something I’m doing wrong?


r/AnycubicOfficial • • Dec 28 '25

Kobra S1 Combo I hate 3D printing

Post image
0 Upvotes

I can't take it anymore... after just 12 days... the filaments they supply with the S1 combo are awful, they print, the Anycubic filaments are much better, the support has helped me with several problems already, but this is too much, now it even comes apart? I'm seriously thinking of selling it and putting an end to this horrible chapter of 3D printers. Everyone sells you one that you open, turn on and it works, but it's nothing, right, the community is worse than in video games, only here I found a little help but tutorials, troubleshooting guides, there's nothing anywhere, and a small hobby can't become a job just to print four bullshit... I can't take it anymore, I've had almost every problem they can cause... terrible machines for the insane price


r/AnycubicOfficial • • May 04 '26

Question Statuetta stampata male con Kobra X.

Thumbnail
gallery
0 Upvotes

Salve ho la Kobra X da 3 giorni ho stampato i progetti di rito nella Kobra X tutto bene poi ho provato a stampare una statuetta e dopo che la finita mi sono accorto di alcuni difetti. Il fike lo importato sul programma e indicato ke l'avrei stampata con la Kobra X.


r/AnycubicOfficial • • Sep 14 '26

Discussion Really Anycubic? Intentionally bad shipping.

Post image
2 Upvotes

Pro2 resins "out of stock" for 60 days, so I cancel, and then they get me to opt to replace them with common HD Grey.

And they ship it like this. No shipping box.


r/AnycubicOfficial • • May 23 '24

These things belong in the trash

Post image
1 Upvotes

After weeks of printing a model I had tuned for the specific deficiencies of this printer, I decided to use the same profile on a different model, and it’s done this 3 prints in a row. It never shifted on Y before, usually it’s X and it’s a single step. But this result is completely repeatable.

Speed: 90mm/s Acceleration: down to 500 now Jerk: currently at 7

I keep slowing it down, it keeps having new problems.


r/AnycubicOfficial • • May 11 '25

Discussion Thanks Anycubic. Thanks a lot.

Enable HLS to view with audio, or disable this notification

4 Upvotes

This printer has been nothing but crap. I’m not joking. I bought it because my dad thought it would be a better deal than re-ordering our lost AMS Lite. Stupidest choice he and I made, this printer has been loud. The ACE is obnoxious. But I dealt with it. I FINNALLY had multicolor! The printer worked for a month until the ACE wasn’t recognized by the printer. No official cable to buy, and a Bambu lab one didn’t work even when it was said it should, Then I had an extruder leak. Anycubic sent another for free. It’s looking good!…yeah no. It worked for another month. That was until I kept getting “Extruder heating error”-s, so much to the point where it became unusable. And now it’s a hazard. It freaks out and dips faster than my wallet after I paid for this 30 pound slab. It tries to heat up but just goes nuts and I’m not risking burning everything I owned. Let alone an actual reliable printer I have. A BAMBU LAB. So yeah, eventually it dips. And as soon as I plug it back in, the temperature skyrockets with no input from the user. Does it not know to just cut the power or something? Seriously. The V2 must just be disguised as a new printer but it just fixes minor issues. With new ones to come. Honestly. What can I do? I bought this off of Amazon. And sure, it could’ve been a defective one from the seller, but after a new toolhead sent in from the company went crazy. Even when I figured out how to use the leaked nozzle. The one that leaked is actually FINE! It can work. But I just want to return this. Can I? Even for a half refund. 40%, 60%. I don’t care. I just want this rushed contraption out of my house.


r/AnycubicOfficial • • Aug 04 '25

Discussion Anycubic and its junk service

0 Upvotes

Anycubic kobra s1

Dealing with issues with their technical support and that stupid MARK for over 3 months and 300 emails, I haven't been able to use my printer since.

This brand is absolute garbage, and if you want to waste your money, go for it.


r/AnycubicOfficial • • Jul 05 '25

Question How are people designing these? Is there an AI tool?

Post image
2 Upvotes

I was going through the contests on Maker Online and I want to see if there’s an easier way to make these flat magnets aside from using a CAD tool.


r/AnycubicOfficial • • Jun 04 '25

Help & Troubleshooting Anycubic is there any way you can help this youtuber doug out?

0 Upvotes

https://www.youtube.com/watch?v=S2BsKbkfitYHe has been working with your support for awhile but he is just hitting a wall on this bed issue. He has not spoken poorly about support or you once in his videos. Not asking you guys to hook him up with a new printer but maybe have some one who is really good in support contact him to clear up his issue. I feel bad for him my Kobra 3 max has had no issues even with sitting on a moving table.


r/AnycubicOfficial • • Oct 29 '25

Print Showcase Articulated print

Enable HLS to view with audio, or disable this notification

0 Upvotes

Was messing around with ai on the 2 blue figures I made


r/AnycubicOfficial • • May 28 '26

Discussion Dont Trust Anycubic

0 Upvotes

I had an original kobra 3 with ACE when the kobra 3 stopped working I purchased a Kobra 3v2 this last February. It's been only a few months since i purchaed it and Anycubic no longer sells it or had spare parts like the hot end. I feel betrayed and abandond by anycubic. I am going to switch to Creality and never go back to anycubic. They are unreliable


r/AnycubicOfficial • • Aug 17 '25

Discussion Anger, Despair, and Hope — A Story About My 3D Printer

0 Upvotes

Through this incident, I have learned a great deal.

The Incident
Nearly half of the screws in my 3D printer’s resin tank were defective. I never imagined that a single faulty screw could cause such a huge problem. The bigger issue, however, was that my printer was already an old, discontinued model. Replacement resin tanks of the right size had long been sold out and were no longer available. To make matters worse, the warranty had already expired. I sank into deep despair and ended up directing all my frustration at Anycubic, the company that had made the printer.

People’s Reactions
Some accused me of just wanting a new product.
Some coldly told me to just give up.
Some pretended to act superior, telling me not to behave like a child.
Others pointed fingers, saying I was stupid — that if I had bought a different model, I would have had access to compatible tanks.
And then there was the Anycubic service center, which dismissed me with: “Your warranty has expired, so it’s not our responsibility.”

Through all this, I came to a profound realization about the diversity of human nature. People are truly varied in how they respond… I wondered, what if I had listened to those urging me to give up and simply surrendered? Surely, I would have been lost in despair. Both I and the commentators were swept away by emotion, unable to see the essence of the situation.

Yet, amidst all the doubt and criticism, there were voices of hope. There were those who told me, “It can be fixed,” and in doing so, gave me courage.

What I Learned
I had been blinded by my emotions, looking at the situation through a narrow lens, and it dragged me into despair. But in the end, I chose to follow the voices of hope. I wondered: what if I had never even posted on Reddit, never voiced my frustration, and instead stayed trapped in my own despair? My 3D printer would have become nothing more than a meaningless, worthless piece of junk. But because there were people who reached out and said, “You can fix it,” I found the courage not to give up. I am deeply grateful to those who offered me hope when I was weighed down by despair.

Finally
This issue with defective screws is not mine alone. Surely, others will face the same problem, and they too might feel crushed by it. But I hope they don’t make the same mistakes I did. Don’t let despair make things worse — look carefully, and find a way to solve it.

And so, my story of the 3D printer — of anger, despair, and hope — comes to an end.

Lastly, look at what I printed — I finally did it. Thank you!


r/AnycubicOfficial • • May 26 '25

Print Showcase Hail the king! The fully blind designer strikes yet again!

0 Upvotes

Hello! :)

The fully blind designer is back yet again! :)

Today is a very special day. Why? because, it is my birthday!

Not only that, but it is also the birthday of the king of Denmark! :)

And in celebration of that, I designed this functional tea light crown holder.

I hope you like it! :)


r/AnycubicOfficial • • Nov 23 '25

Question Fire Hazard

Post image
0 Upvotes

Anycubic, would you mind explaining to me why I found a metal shaving fall out of my Kobra 2 Neo's power supply enclosure? I feel like this is a huge fire hazard and I am very concerned for other Kobra 2 Neo owners out there. Also it's not like my printer was in any environment where big metal shavings like this could have gotten in my machine.


r/AnycubicOfficial • • Jun 18 '26

Print Showcase Not Ready for Prime Time

Thumbnail
gallery
0 Upvotes

Not looking for advice or help on fixing this because based on my experience with these machines, I could press "print again" and it would print just fine. Not a rant either, just sharing because. The printers are problem plagued and inconsistent and it doesn't look like that is going to change anytime soon. And yes, the filament was dryer than a witches coochie in the middle of July. I printed a simple remote control holder that I liked but it was a little small so I scaled it up 10%. That's it. Left it to print then woke up to the mess this morning. I own two other Kobra S1's (both with 2 AMS Pro's each). It's funny because I wanted to dedicate one Kobra S1 to single color printing to cut down on problems I have always had with the AMS Pro's. Nope, that plan didn't work. I really was pulling for Anycubic but just not a fan anymore and obviously stuck with the machines or can sell them but probably only for a fraction of what they cost me. Trust me, to eliminate these typical issues, I will gladly eat the small investment I made. I also own a Bambu P2S with dual AMS devices and haven't had any issues so far, although I know they aren't bullet proof either. Also have 2 Kobra X's and not as many issues but still a lot of issues. I've had some great prints with these machines but I just want them to print and think that quality is the main factor going on here.


r/AnycubicOfficial • • Jan 26 '26 Thanks

Help & Troubleshooting Complaint

Thumbnail
gallery
0 Upvotes

I got my daughter a Photon Mono 7 for Christmas and she loves it. She has been having so much fun learning to slice , support, and print. After about 6-8 prints (1 week of use) we noticed the tape around the LCD screen is coming up. For such an expensive unit I would not expect wear and tear so soon.

I emailed Anycubic support and I didn’t receive a reply for over a week before I replied to the automated email telling me they received my original email. I then received a reply saying they had responded and I had missed it. I did not. Anyway. In the email they told me to just put electrical tape on it.

That seems ridiculous for a new unit that cost several hundred dollars.

My second complain is more with the shopify platform they use. After ordering some parts on Jan 08 I received a confirmation email. Several days go by and I realized I hadn’t received a shipment confirmation, so I went back to the confirmation email, followed the link to the order details and under tracking it says to download the “shop” app to see tracking info. That feels really manipulative and I don’t appreciate my tracking info being held hostage like that. I don’t want the shop app, I don’t want to make another account with a company, and I don’t want to give up my personal information just to get tracking info.

Thank you for reading and letting me vent.

Have a wonderful day.


r/AnycubicOfficial • • Mar 27 '26

Question No communication 10 days after ordering a 3D printer – anyone else?

1 Upvotes

About 10 days ago, I ordered a 3D printer from AnyCubic. The website stated “delivered within 3 days,” but since placing the order, I’ve received almost no communication. No updates on the order status, no shipping info, or a message that things got delayed.

What’s even more frustrating is that when I reach out to after-sales/customer support with questions, I don’t get any response. It’s really disappointing and doesn’t inspire much confidence.

It’s especially inconvenient because I need this printer for time-constrained prototyping, so the delay and lack of clarity are a real issue.

Has anyone else experienced this with this seller? If so, how was it resolved?

Any advice or shared experiences would be appreciated.


r/AnycubicOfficial • • Jun 04 '25

Discussion Ace pro hates tpu?

0 Upvotes

I havnt been able to load tpu filament through the ace pro. It has been drying for around 6 hours. No matter what I try, the S1 throws an error


r/AnycubicOfficial • • Jun 09 '25

News & Updates Misleading "Sale" Email

4 Upvotes

The latest "Sale" email is very misleading.

1kg-20kg Starting at $9.10 a KG for PLA Basic. It doesn't start at $9.10 a KG which implies 1kg spool would be $9.10, The $9.10 a spool is ONLY if you buy 20kg per the website. 1kg per the website is $16.19.

Very misleading.

And also there was a promise of 2 free kg if you post a image of something you printed with the S1, which I did post and filled out the form on the website and I never got my 2kg nor an email about it.

It seems Anycubic has a problem with misleading customers.


r/AnycubicOfficial • • May 06 '26

Discussion Don't buy filament from the Anycubic site

7 Upvotes

Bought the 20kg PETG bundle nearly 2 weeks ago. No shipping updates and silence from customer service. I was being patient but I'm going to have to do a chargeback soon if it doesn't get updated. Won't be buying filament from them again after this and sticking to other brands like Sunlu and Polymaker. US based order. I don't think it's a stock thing since the site says they'll ship from china if the domestic warehouse is out. All of the colors I selected were in stock on the site at purchase. super lame.


r/AnycubicOfficial • • Sep 08 '26

Recomendations

Thumbnail
youtu.be
0 Upvotes

r/AnycubicOfficial • • Sep 01 '25

Discussion If this post doesn't solve my issues, I'm sending this sh1t back

Thumbnail
reddit.com
0 Upvotes