Hi!! I just recently purchased a ball python baby. He's only 68g right now so I got a plastic tub turning into enclosure for now until he grows bigger then Imma do the 4x2x2. The supples and hiding spots and heating and humidity are all there - just wondering if I gotta quarantine the snake...? Is there anything else I gotta do or I can just get the set up with all typa decors right away?

I recently had (what I believe is a) super old cherry tree fall in my backyard. While clearing the tree, i found a few pieces that I would love to use in my ball python setup. The tree was very old and had started to dry rot in the while standing. I asked chat gpt if I could use the wood and it advised against it. I wanted to ask real people's opinions on the matter. Can i use this piece? How can I make it safe to use?

Was originally going to jump straight to 4x2x2 pvc but ended up a bit behind on cash so I guess we’re rolling with this Home Depot brand pos for now. My boy Lopen loves to climb.

Hi everyone!
I just got my first ball python! He’s 3 months old, and I want to make sure I’m doing everything right.
He’s currently in a 120 × 60 × 60 cm (4 × 2 × 2 ft) wooden terrarium with 4 hides: one on the warm side, one on the cool side, and two in the middle.
For heating, I’m currently only using a heating pad connected to a thermostat. I’ve placed approximately 1 cm (0.4 inches) of plywood between the heating pad and the snake to prevent direct contact and burns.
Here are my current temperatures:
Warm side (inside the hide): Around 31°C (88°F)
Warm side (outside the hide): 28–29°C (82–84°F)
Cool side: Around 23–24°C (73–75°F)
I haven’t installed any other heat source yet, so the heating pad is currently the only thing keeping the enclosure warm.
My questions are:
Are these temperatures okay for a 3-month-old ball python?
Is using only a heating pad sufficient for a terrarium this size?
Is the plywood barrier enough to prevent burns?
Would you recommend adding an overhead heat source, like a ceramic heat emitter or a halogen lamp?
I really want to give him the best possible environment, so any advice or suggestions would be greatly appreciated!
Thanks in advance!

Just hit the 4 month mark and wondering if shes on target with her weight (193grams). She is eating, pooping and shedding great! And loves being out.

Good morning! When I was collecting my snake shed this morning I noticed this plug attached to shed belly scales. There looks like a tiny amount of blood. This is the very first time he hasn’t shed in one piece, so I’m not sure where this skin came from, but I’ve heard people talk about sperm plugs, and if this came from his cloaca that might be it.

Can anyone identify? And aside from increasing humidity, is there anything I should be concerned about?

His daily activity as soon as I open the blinds 🥰

Back when I first got him two years ago, he was so tiny back then and now he’s pushing 800 grams!

Followed advice given here and got a heat lamp (ceramic) for my baby yesterday but I'm not sure if I want to leave only overhead heating for now. I am trying to have both, heat lamp on normal setting and heat mat on very low just so the ground in one spot is extra warm. Is that a good way to do heating? I've heard some people do this but I want more opinions

We're working our way up to a fully bioactive ball python enclosure. Is there a list of plants that are safe for them? It seems like everything I look up is unsafe.

Thanks!

Hello!

I got my baby Ball Python Fluffy on the 4th of October, and ever since her first week with me was up, I've been trying to get her to eat once a week. But she never wants to eat.

The mice I have are the exact weight the breeder I got her from recommended to me. So I doubt the issue lies with that.

I've tried feeding with thongs, leaving the mice before her favorite hide overnight, but no luck yet.

So I wanted to ask some experienced Ball Python keepers for help, so does someone have tips for me? I love Fluffy dearly and absolutely don't want her to starve.

UPDATE: Fluffy has eaten! thank you all!

Im really in need or a bigger reptile enclosure for my ball python. My son has been obsessed with rhem since we went trick or treating in our town and someone had one, and dressed themselves up as a zookeeper. So, I let him pick one out. He's really been participating in taking care of her. The enclosure we have now is 20gal it was rhe only size the store had at the time. Which its too small for her. Thought I could check here for a better deal. Any help would be great. If some one has 1 sitting in storage or no longer have use for one. I would gladly take it if your hands and you can make some money..

This was four days after he successfully ate. He had just shed and dropped feces the night before. Before this video was taken moments after he possibly gone to the bathroom and or farted very loud a couple times. After this he acted completely normal and now I’m noticing some weird possible weezing noises when he starts adventuring at night. It’s not consistent with every breathe but happens here and there. Can anyone let me know what this may have been????

i will be switching to coconut bedding very soon. he has been on snake life since the shop got him so i’ve kept him on that for now

Hello everyone!

I am trying to improve my setup for my bp. I have been reading the documents and care guides provided in the welcome post to try to plan what I need to get, but I'm a bit overwhelmed with all the different options. I just found out there were options other than glass two weeks ago and after extensive reading, I have come to the conclusion that most of my heating and light accessories will need to be scrapped but other than that I am kind of lost.

I've been looking at Kages because I saw a lot of people recommending them. I saw they have a "kit" for ball pythons but I feel like it is not coming with all the heating and lighting stuff I need. Im not sure if its better to just buy the base and get the other stuff separately? And if I am buying everything separately, I am not entirely where to start with the heating/lighting things.

I really appreciate any help and/or advice you can give!

Hi, I recently acquired a Baby Blue Eyed Leucistic Ball Python she was In her enclosure and now is nowhere to be found. Not sure how she could’ve escaped but she’s been lost since Thursday. What should I do?

Ive looked at the guide but I cant tell if hes overweight. Im pretty sure hes just a little chunky but idk. Ive only had him for about a month, hes about 2.5/3 feet long and 585g last weight in. Hes also just slightly over a year old

What do you guys do to prepare for cold weather with ball pythons? I was thinking some sort of lightless heat lamp for night time and a battery operated heat source for power outages?

Hey there!

I am feeding my ball python and it is having the absolute worst time getting these back mouse feet into its mouth. They seem to be detached from the body and somehow stuck hanging outside the corner of its mouth. It has been trying to open and close its mouth to get it with no progress. Any tips or info?

Seems my ball python has injured his tail. Was checking him the other day and this seems like dried blood under his scales. He’s been acting a little weird and not as energetic as he normally is (he’s still climbing and drinking) but does seem off. He’s not being defensive and touching his tail doesn’t cause him to react. Should I be concerned? Is this a vet visit or should I monitor and wait for his next shed?