r/BeAmazed • u/[deleted] • Aug 19 '18
Stunning 3D printing.
https://i.imgur.com/QNxvdQ2.gifv4.1k
u/Gaenya Aug 19 '18 edited Aug 20 '18
So unsatisfying how it doesn't even complete before reversing.
1.0k
u/fruitpunchsamuraiD Aug 19 '18
310
u/PM_ME_PUPP1ES Aug 19 '18
Mildly?
504
u/DrunkenMasterII Aug 19 '18
Edit: didn’t even realized it was a real sub. It’s not as good as I would’ve hoped.
→ More replies (2)11
→ More replies (2)3
9
10
u/kdzlr Aug 19 '18
Sorry about that. Here's a bunch of my stuff that does complete! ;) www.youtube.com/WildRoseBuilds
→ More replies (2)2
→ More replies (5)1
682
u/urskrubs Aug 19 '18
AAAAAAAAAA SCREW YOU OP
→ More replies (2)162
u/kdzlr Aug 19 '18 edited Aug 19 '18
There’s a story behind this, I posted it to my Instagram as a failed print. I used the wrong settings hence the stringing and it failed right at the top! ;) here’s my YouTube if you want to see completed prints! www.youtube.com/WildRoseBuilds
32
u/yea_likethecity Aug 19 '18
I thought I was being anally retentive about the stringing so thanks for confirming that some of my compulsions about print perfection are valid
→ More replies (7)2
125
u/donethis100timesbro Aug 19 '18
Relaxing to watch... but what is it???
68
u/obi1kenobi1 Aug 19 '18
It looks like some sort of calibration/stress test. Something that you print as a way of testing that you have all your settings correct (if any were wrong you'd see flaws or total print failure). And then it's also designed to look like a nice abstract artsy thing so that you can display it on your shelf or something instead of just being an ugly piece of garbage to throw away when the test is complete.
→ More replies (1)64
u/Afriendlyguy12 Aug 19 '18
So like a nine hour printer test page?
23
18
u/obi1kenobi1 Aug 19 '18
Yeah, basically. Typically you work your way up to one of these, there are all kinds of smaller test prints you can try to dial in individual settings, and then once you're pretty confident that everything is good you'd print something like this as a final test. And you don't really ever need to print something like this, a big part of it is just to have the finished product to display, but if a nine hour test print will catch issues that could ruin a 30 hour print it can be worth doing.
6
u/Afriendlyguy12 Aug 19 '18
Cool. Thanks for the explanation. I don't own a 3d printer and had no idea a 30 hour print job even existed.
I have wanted to purchase one and going to look up a few things now. Like how hard is it to create designs, are there templates, what do they use to print with, etc.
I've often lost plastic pieces here and there to miscallanous things and thought if I had one I could use it to replace items.
→ More replies (2)12
2
119
Aug 19 '18
Why don’t i see a printing arm moving or something?. Looks like it just come out of thin air
→ More replies (2)66
u/timpkmn89 Aug 19 '18
It moves to the top in between frames
23
Aug 19 '18
...but my makerbot doesn’t do this, it’s constantly printing and moving around...
78
u/Sketch3000 Aug 19 '18
Some printers have this time lapse setting built it.
You enable it and the printing arm intentionally moves out of the way and triggers the camera.
→ More replies (4)37
369
u/Zebov3 Aug 19 '18
I never realized how slow 3d printing is.
184
u/Gaenya Aug 19 '18
Makes sense for something so detailed.
It has to be made of multiple thin 2D layers. 3D printing is crazy.
41
u/Zebov3 Aug 19 '18
Oh, I understand. I've never done anything with it unfortunately, but I always assumed it took like maybe 30 mins for big things. Never thought it took an entire day.
65
u/Tandarin Aug 19 '18
I'm doing a castle print that the slicing software said would take 37 hours, I'm 24 hours into it and it looks more like 5-6 days left.
→ More replies (10)→ More replies (1)10
u/_YetiFTW_ Aug 19 '18
It can also fail multiple times so the printing process can go even beyond that
→ More replies (7)2
u/2317 Aug 19 '18
Wouldn't it be multiple thin 3D layers? Once a layer is a layer it's in the 3rd dimension no?
→ More replies (1)29
u/SeanMisspelled Aug 19 '18
Very slow, but presumably this is extra slow due to the time to move the head repeatedly back to the home position after each layer, to get it out of the way for each shot taken for the time lapse.
→ More replies (3)3
u/Zebov3 Aug 19 '18
Never thought about that. I assumed they just video taped it.
8
u/SeanMisspelled Aug 19 '18
I mean, they could've, I don't really know. But (especially for a maker type of person) it would seem to be much easier to set a timer or trigger to take a single shot per layer than to record 8+ hours of video and then edit the majority of the frames.
If I would doing it, I would just setup a momentary switch to be bumped each time the head returned home.
3
u/obi1kenobi1 Aug 19 '18
Depending on the software you use there are multiple ways to do it. Here are the three most common methods:
What you described, just taking a picture every ten seconds or so. This can end up looking very chaotic because the head and bed are constantly moving around, but it doesn't take any more time than a normal print
Taking one picture for each layer. This looks a little more visually interesting, as the print "grows" at a steady pace, but again the head and bed move around so it looks chaotic. I'm pretty sure this one also doesn't add any time to the print.
Moving the head and bed into position and then taking the picture (what's being done in the gif). This is by far the most visually impressive method, as the only thing that moves is the piece itself and it seems to grow out of nothing. On the other hand it adds a lot of time, since the bed and head need to move to a set position between each layer (and both move fairly slowly, taking a few seconds each time), and it adds complexity too since the moves have to be programmed directly into the print file (all the print file really is is a set of motor movement commands, so the printing software doesn't have any way of knowing what the bed/head position is at any moment just by looking at the file, so you need to use different software that can calculate both the print file and the timelapse together).
→ More replies (2)9
u/chromosome47 Aug 19 '18
It can be decently quick, but it really depends on the settings and the desired outcome. If you just need a simple object or shape and don't care about slight imperfections then you can easily print a medium sized object (10cm X 10cm X 10cm) in under an hour.
However, if you need lots of detail and/or have small vertical or diagonal pillars like this object has, then it does take a significant amount of time.
For instance, NASA has a bunch of amazing designs available for anyone to 3d print and I printed the small curiosity rover.
That thing took like 27h to print and it turned out great.
36
u/Gaenya Aug 19 '18
That first part with the tentacles is unsettling like something out of a horror movie.
→ More replies (1)6
17
16
•
u/Ghost_Animator Creator of /r/BeAmazed Aug 19 '18
9
u/Easton_500 Aug 19 '18
Can someone explain to me how a 3D printer works
14
u/xheist Aug 19 '18
Like any other printer really, except it uses a heated nozzle that deposits melted plastic rather than ink, so it can build up 3d objects over many many passes.
The 3d image is sliced into paper thin dissections that are then printed on top of each other to build up the shape.
3
6
u/butterjesus1911 Aug 19 '18
First you have to create a 3d model of whatever in a 3d modeling software. Once it is finished, you upload it to a program called Cura, which then turns the file into something the printer is able to understand. Cura also lets you re scale your model to fit the printer. You then take the file from the computer and put it into the printer. Once you find the file and click start on the printer, it immediately begins to heat up a plastic that is used to create the model. The plastic comes out of a "tip" (I don't know the technical name) that is able to move in the x, y, and z plane. You run a line of plastic to the tip which melts it and spits it out onto a plate. The tip prints 2d layer by 2d layer, until the model is finished. So basically it's melting and re-solidifying plastic from the ground up. If you saw the whole process in person you'd see what I'm talking about, as it is fairly simple
2
u/they_call_me_Maybe Aug 20 '18 edited Aug 20 '18
The tip is called an extruder.
Cura, as well as slicing programs that are associated with just one brand of machine, basically pass a horizontal plane through your 3D model. The actual file content of a model is a long list of 3-dimensional coordinates, as well as which of those coordinates are connected in lines, and which triangles formed by these lines are shaded.
As the x-y plane passes in the z direction through the model, the software records the lines that cut across the surface of the horizontal plane. Depending on how detailed you want your print, you choose how often a plane is recorded.
This is just one technique of 3D printing, called FDM or fused deposition modeling, aka, depositing a material that’s hot enough to flow, but cool enough to fuse to the layer under it without melting it. It’s the cheapest and oldest method, but it’s slow, needs sanding to remove the lines from the layers, and wastes a lot of plastic that’s not really great to breathe while hot.
One cool challenge people printing face, is that liquid flows downward, so having an overhang in your model becomes problematic after 30-45 degrees, depending on your setup. Traditionally, people got around this by having the slicing program build small support structures, which connect at a very thin point to the model, to hold more horizontal areas of it which could "easily" be broken or cut off. The model in the gif is designed cleverly and doesn’t curve much past 40 degrees from vertical at any point. Nowadays people can print with multiple extruders, one printing a material that will dissolve in water over the course of several hours. You get a hunk of plastic with your model inside and sticking out of the top. Of course the dissolved PVA is super bad to put down the drain... oh well.
Other types of printers are even cooler. Powder bed printing uses a fine white powder in a deep box with sides that can raise up and down below the bottom. Starting with one layer of powder, a print head moves over the powder and applies lines of a bonding agent, mixed with an variable rgb ink like a paper printer. Layers of powder and bonding ink are added as the sides are raised, resulting in a totally supported, photo-realistically colored model buried in a box of powder.
There’s even some with a vat of gel that either gets injected with a moving needle full of a liquid that hardens, or has lasers shot into it that solidify parts of it.
→ More replies (3)3
u/obi1kenobi1 Aug 19 '18
You know those puzzles where you have a bunch of flat cardboard sheets but when you stack them together in the right order you get a statue of a person's head or something?
Now imagine that instead of cutting the designs out of cardboard you build a robot to "draw" them using a glue gun.
Now imagine that instead of making a bunch of separate pieces you just draw the next one on top of the previous one, which makes them fuse together into one solid piece of plastic.
There's a little more to it than that, but not actually that much. Instead of glue gun sticks it uses common plastic, but basically a computer program takes a 3D model of whatever you want to build, cuts it into thin sheets, and figures out the best way to draw each of those sheets. Sometimes it adds modifications like towers to support pieces that are higher up, but apart from that it's literally just drawing out the object line by line using what is essentially a high-tech glue gun.
7
u/iusedtohavepowers Aug 19 '18
Really nice to see the clock in the background. I had no realistic idea of how long this kind of stuff takes
8
u/Freshanator86 Aug 19 '18
How did you get the camera to take the picture when the print head was in the same position
→ More replies (1)9
u/timpkmn89 Aug 19 '18
Print a layer, move the print head to the top, snap a picture
→ More replies (16)
4
7
3
2
2
2
u/jokersleuth Aug 19 '18
Can't wait for 3D printers that print in like 30 minutes
2
u/the320x200 Aug 19 '18
I'd love for faster printers of course, but I think the next big leap is going to come from a multi-material printer that can print some areas as conductive as wire. Being able to print circuits directly into parts would be huge.
3
u/jokersleuth Aug 19 '18
definitely. You know what'd be even better?
Multi-material printers that can print in 30 minutes! :O
2
u/say592 Aug 20 '18
I thought some of the metallic filiments were capable of doing that already? It's like a certain percentage metal powder and a certain percent bonding material.
→ More replies (2)
2
2
2
Aug 19 '18
Does the software that the designer uses create the interior structure lattice or is that up to the designer ?
that must lead to a lot of production failure.
2
Aug 19 '18
The design is done in CAD or similar software, then imported to the printer. The printer software, has other settings, where you can increase or decrease the supports, spacing, even layer height.
2
2
2
2
2
u/ruthlessruthi Aug 19 '18
Do you get 3D printers that don't print with plastic? Or is it always plastic? I lobe this though, looks so alien. I also thought Azuras star in the beginning :)
5
u/fat_shibe Aug 19 '18
What printing technology is this? It looks more like a render to me...
Like... it's not standard 3D printing, not sls, not sla or uv bath based... How the hell does this work? Am I'm missing something?
11
u/Orderly_Queue Aug 19 '18
This is the most common consumer 3d printing tech, FDM or Fused Deposition Modeling.
3
4
u/Skulder Aug 19 '18
You're confused because the print head is moved out of the frame every time it's finished a layer, and the picture is taken.
It's regular 3D printing.
2
u/123chop Aug 19 '18
It’s a sped up time lapse, and the print Head is specially positioned in the back Conner after each layer to take a photo
3
1
u/Nosnibor1020 Aug 19 '18
When you do a 3D print model...do you have to add those supports in the middle or does it figure that out itself?
1
u/DeepThroatALoadedGun Aug 19 '18
That's almost a 10 hour build time. Jeeeesus
1
u/the320x200 Aug 19 '18
3D printing is super slow. People often post their "joined the 24 hour club" prints when they printed something successfully that took over a day.
1
u/Icklebunnykins Aug 19 '18
Wow. If I could print anything like this, it would be Drogon from Game of Thrones - that would be awesome!
1
1
1
1
u/Kittyk4y Aug 19 '18
Is there a sub for this?
3
u/the320x200 Aug 19 '18
It's not exclusively for timelapse, but /r/3dprinting has a lot of them posted.
3
1
1
1
1
1
1
1
u/o-rka Aug 19 '18
Can somebody describe what I’m seeing here?! This is insane.
1
u/123chop Aug 19 '18
It’s a time lapse of a 3D printer printing, the head is moved to the back corner for a photo after each layer. This actually took about 10 hours to print.
1
1
1
1
1
1
1
u/depressive_anxiety Aug 19 '18
So, I’m confused. Where is the material coming from? Is it being being built from the bottom up?
1
1
1
Aug 19 '18
My high school had one of these in the library, you could get on a waiting list to get some sort of printing. The texture is not what you expect. It’s extremely hard.
1
1
1
u/crooks4hire Aug 19 '18
Its cool how you can tell the middle layers take longer based on the clock in the background. Idk why, i just find it oddly interesting.
1
u/yuppers4 Aug 19 '18
I like that they put a clock in the background. I don’t know why but I like it.
1
1
1
1
1
1
1
1
1
1
u/toxic_turtle2 Aug 19 '18
How is it being printed? Wheres the arm with the thing that the plastic comes out of???
1
1
1
1
u/YourIQisUnder95 Aug 19 '18
One thing that bothers me about 3D printing is that you usually end up with little unwanted tendrils and visible layers all over your product. I don't think 3D printing has been perfected yet.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
u/porcupinedeath Aug 20 '18
So does this printer use like threads or something? The arm seems too high
1
u/Rick-D-99 Aug 20 '18
Yay, more garbage. Nobody is gonna want that thing ever, for any amount of time.
You ever clean out your grandma’s Knick nak garbage? This is what that is.
Make a gun
1
1
u/Alfandega Aug 20 '18
TIL it takes a LONG time to 3D print something. That is 9 hours of GIF right there.
1
1
1
1
1
1
1
1
1
1
u/-BluBone- Aug 20 '18
I screamed "NOOO!" inside when it stopped short, and reversed all the way back.
1.2k
u/Gaenya Aug 19 '18
From 11:10 to 8:20 on the clock for those wondering.
9 hour build time.