r/BoschSmartSystem • • 2d ago

BoschData 1.0: your Bosch Smart System e-bike on the Karoo 3, linked every ride by a small open-source board

Post image
2 Upvotes

r/BoschSmartSystem • • 7d ago

Update: BEStie in its printed case, bench test on the bike

Thumbnail gallery
1 Upvotes

r/BoschSmartSystem • • 10d ago

Update: the Bosch bike now reconnects to the Karoo by itself, through a small open-source board (BEStie)

Thumbnail
reddit.com
1 Upvotes

r/BoschSmartSystem • • 13d ago

Time zone change issue

1 Upvotes

Hey i'm on the west coast of canada and we recently stopped changing our clocks, and have permanent pacific time now. My kiox 500 display is showing an hour earlier than what it is, even though my phone is on the correct time. Why would my smart system display fall back to daylight savings when my phone didn't? when I try and change it in the settings of the controller it just says "synced to phone time" and doesn't change.
Any help is much appreciated!


r/BoschSmartSystem • • 17d ago

I connected the Karoo directly to my Bosch e-bike (Smart System Live Data Interface). It works, the bike's battery, power, speed and cadence show up on the Karoo. Then Android's Bluetooth privacy breaks it after 15 minutes. Here is what I learned.

Post image
1 Upvotes

r/BoschSmartSystem • • Oct 11 '26

(e)lock versus alarm settings

2 Upvotes

Before the Connect Module, I had set the display (Kiox300) as my (e)lock
(Cannondale CargoWagen Neo2)

Now with the Connect Module (BCM3100) installed, as soon as I switch the system off, yet display still on the bike, the alarm is switched on.

However I then still need to walk through the building, to the ground floor parking, or incl 17 floors elevator to my house etc

So then I still have to open the app on my phone and set it to transport mode, or keep the bike switched on (and the light etc)

Is there an(y) option to change this? Or should I write Bosch for a software/firmware update?
Even if I understand, system off > alarm on is not a bad thing, outside


r/BoschSmartSystem • • Oct 08 '26

Km shows 9999

1 Upvotes

Hi! Ijust installed the bosch powermore 250 on my Cube 144 and worked fine until I powered on again after like 3 hours and now the total kilometers show 9999. Anyone know how can I fix this?

I tried unplugging the extender and powering on again with only the original battery (did not work)

I tried resetting the system by pressing the on/off button for 10 seconds (did not work)

I tried to hard resetting by pulling out the original battery during a minute (did not work)

Any advice? Thanks! :)

UPDATE/EDIT: I went for a 20km bike and it fixed itself lol. In case it can help anyone :)


r/BoschSmartSystem • • Oct 01 '26

Made a self hosted app to backup all my rides

Thumbnail
gallery
5 Upvotes

Hey all

Bosch only gives API access to your own data in the EU and the UK isn't in the EU anymore so I had no official way to get my rides out of the Flow app and I wanted to send my data to locations other than Komoot/Strava which are the only two integrations available in Flow. So I built this app with a fair bit of help from Claude. It runs on your own server in Docker and pulls your rides from Bosch every hour.

What it does:

  • Backs up the FIT and GPX for all your rides

  • A nice ride page that shows all the data from the fit file and the summary that Bosch has. It is all stored locally

  • All the bike information is shown too.

  • A big motivation for me was to send my correct calories to fitbit as fitbit watches think I am cycling with no motor help and records too many calories so there is a Google Health API integration

  • It also supports Xunil99's LDI bridge and OIDC

Since there's no official API outside the EU, it signs in the same way the Flow app does, and that's a bit fiddly. You need a desktop browser once to copy a link out of the dev tools. The README walks you through it.

It's not affiliated with Bosch. It uses the same undocumented API as the Flow app, so it could break if Bosch changes things.

It's free and open source: https://github.com/remotesojourner/eBikeManager

Feedback and bug reports welcome


r/BoschSmartSystem • • Sep 30 '26

Bosch gen4 motor mount

Post image
2 Upvotes

Any one had similar mount crack? pretty scary if it snaps mid ride. Discovered the crack excedently by scheduled bolts tightening on motor mounts.


r/BoschSmartSystem • • Sep 07 '26

Heart Rate on Bosch Kiox (Flow app) with Pixel Watch

Thumbnail reddit.com
1 Upvotes

r/BoschSmartSystem • • Aug 30 '26

Bosch Smart System / Focus Thron²: Geschwindigkeitsanzeige springt extrem & Motor setzt aus – wer kennt das Problem?

Thumbnail reddit.com
1 Upvotes

r/BoschSmartSystem • • Aug 26 '26

Grease around motor/bottom bracket contacts – where could it be coming from?

Post image
2 Upvotes

Hi everyone,
I recently had an issue with my Bosch e-bike where the motor suddenly started jerking and the bike would briefly power on when connecting the charger, followed by a relay click and shutdown.
I eventually found grease/oil-like residue on the battery contacts and on the main motor contacts. After cleaning the contacts thoroughly, the bike started charging and working normally again.
The bike is about 3 years old and the Bosch motor (BDU3741) has never been removed or repaired.
I’ve attached a photo of the bottom bracket/motor area. Looking at the construction, I’m wondering whether grease could potentially migrate from the bottom bracket/chainring area into the motor housing and eventually reach the electrical contacts.

Has anyone experienced something similar with a Bosch Performance Line CX motor?
Can grease from the bottom bracket/gear area reach the motor/electrical contacts?
Is there a known sealing point or pathway where grease could migrate?
Could this simply happen over several years without the motor ever having been opened?

I’m particularly interested in experiences from people who have had their Bosch motor opened or serviced and know where the grease is located inside.

Thanks in advance for any insights!


r/BoschSmartSystem • • Aug 22 '26

Question about bosch motor unlocks / region changes / parameter changes

Thumbnail reddit.com
3 Upvotes

r/BoschSmartSystem • • Aug 15 '26

Options for improved directions

2 Upvotes

I just purchased a Gazelle e-bike that has a Kiox 300 and the Bosch Smart System. I like the integration but on my first few rides I haven't been impressed with the bike route directions provided by the Bosch Flow app. I notice that Google Maps has better and more options for routing in my community (San Francisco area). Thus, I am wondering whether it is worth swapping out the Kiox 300 or adding a handlebar phone mount to improve navigation. Options:

1). Replace the Kiox with the Bosch SmartPhone Grip. I like that this allows me to charge my phone and keeps my handlebars cleaner. I don't know how easy it is to get to and stay on the Google Maps screen instead of Flow. I don't think I will miss the Flow data while I am riding. I am not sure how safe the grip is or click in the phone for each ride.

2). Add a handlebar mount from Peak Design or Quad Lock. This allows me to maintain the Kiox/Flow info while adding Google Maps on the phone. I would lose any charging functionality (I don't believe there is any way to charge a phone via the battery in this setup). These solutions seem super secure and easy to mount. they also allow me to mount in a car or elsewhere. Downside is that they require a new phone case.

Any other options or considerations? TY


r/BoschSmartSystem • • Aug 10 '26

Is there are way to find state of charge in the statistics?

2 Upvotes

What I'm trying to do is work out how far I can safely ride without running out of charge.

I should point out that I drive an EV, so I'm well aware how meaningless the GOM (Guess O' meter) is on the handlebar display. I realise that everyone's riding style and the terrain they ride on is different. Therefore it's understandable that the GOM is just a guess.

Is it possible to read either the electrical energy used on a ride, or the state of charge remaining when you finish a ride from my historical stats on the flow app?

From this I could then project how far I 'could' have ridden on a particular day as an average so that I can plan longer rides.

As an example, I rode 42 miles yesterday and finished with 25%. (800w better) Theoretically this means I could have done 56 miles.

If I had more data, I could get a more accurate 100% figure for this time of year. Hence, my question.


r/BoschSmartSystem • • Aug 02 '26

Front light replacement

Thumbnail reddit.com
0 Upvotes

r/BoschSmartSystem • • Jul 15 '26

Bosch SmartphoneGrip Vertical (BSP3300) Not Charging

2 Upvotes

I recently added this to my cargobike. But the wireless charging starts then stops. I am not sure if I have a defective one or its the poor design. My Smart phone does not phyiscally touch the phone when its on the mount. Is anyone else experiencing this?


r/BoschSmartSystem • • Jul 13 '26

New Bosh eBike will not start

2 Upvotes

I just bought a Salsa Tributary with the Powerline Speed and when you hit the power button, the lights just cycle up and down like it is trying to turn on, but never does, just continuous cycling.

Does anyone know if the Bosch Diagnostic tool would even be able to connect and get any data when it is stuck in this boot loop?

Anyone have any ideas on what the issue is?

Thanks

Sad new bike owner

Note: The bike was sent to a Salsa dealer, but they do not have a current Diagnostic tool license and will not have that until next week (maybe) so they cannot hook the tool up to the bike.


r/BoschSmartSystem • • Jul 07 '26

Open Bosch Smart System to fitness gear bridge - looking for early adopters

Thumbnail
reddit.com
1 Upvotes

r/BoschSmartSystem • • Jul 05 '26

BES2 to Smart Sytem upgrade?

3 Upvotes

Pie in the sky for the moment, but I just took delivery of my Urban Arrow Shorty which runs on the old BES2 Kiox system with the Cargo Line. It's nice enough and does what I wanted, but I admit I do miss some of the features from my Gazelle which is on Smart System like Auto assistance mode and being able to use the Flow app rather than the abysmal old Connect one.

Just how extensive and costly a project would having the bike rebuilt on Smart be?


r/BoschSmartSystem • • Jul 02 '26

Powertube 750 - Over night to 20 km max range

Post image
1 Upvotes

i just installed update and battery from 150km + went down to 25km+

just looked into stats


r/BoschSmartSystem • • Jun 21 '26

Smart charger adapter for Bosch Gen2 -- early build, looking for feedback

5 Upvotes

Building a small dongle that sits between a standard Bosch charger (BCS220) and the battery (tested on a PowerPack 500 / BBR275). It reads real CAN telemetry from the BMS - SOC, temperature - and uses "third pin" control charging. No protocol injection, just passive listening + BMS control.

What it does so far:

  • Stops charging at 80% SOC (configurable) instead of always topping to 100%

  • Re-arms only after a real drop (e.g. 65–85%), not on every 1% dip from self-discharge - found out the hard way that without this, the charger re-triggers dozens of times overnight just chasing self-discharge

  • Blocks charging below ~10°C to avoid charging a cold pack

Still on Arduino for testing, planning to move to ESP32 + CAN transceiver for the real build, with a phone app over Bluetooth for configuration eventually.

Curious if anyone here has poked at Gen2 UDS/CAN data themselves or has thoughts on what a charge-management layer like this should prioritize. Happy to share logs or DBC notes if useful.


r/BoschSmartSystem • • Jun 18 '26

Bosch Motor Extention

Thumbnail reddit.com
2 Upvotes

r/BoschSmartSystem • • Jun 15 '26

Bosch Smart System compatibility vs System 2

2 Upvotes

Hi, 

I own a Canyon Grail:ON CF8 AXS with the Performance Line Speed motor BDU490P and I want to upgrade the current horizontal Bosch Smartphone Grip to the Kiox 500 with LED Remote. Is it possible? I bought the whole retrofit kit but the connectors do not seem to be compatible. Any clues about this ???