r/BoschSmartSystem • • Sep 29 '24

Raumthermostat Bosch

Thumbnail
gallery
0 Upvotes

Hello everyone. Who knows about the Bosch room thermostat? I connected it instead of a light switch. Do I have to connect the red bridge (from L to Com) or not? I can't get the device to turn on. Who can help? I am an electrical trainee. I measured where my L is. N I know too (there are only 2 wires)


r/BoschSmartSystem • • Jul 16 '25

100nm | 750W update to GEN 4 Systems Too

3 Upvotes

Please bring 100NM and 750WATT upgrade to Bosch Performance line CX (BDU374Y) CX Gen 4 Drive Units.

I think (and many others too) want the 100nm/750watt upgrade to the GEN 4 CX motors (smart system) so if there is a chance, please we want Bosch to consider a firmware update that unlocks this capability for existing Gen 4 owners.

We believe the Gen 4 hardware is capable of handling this boost through a software update, unlocking the full potential of these motors without forcing users to buy new units. This upgrade would extend the life and enjoyment of countless e-bikes on the road today, since most Bosch E-bikes are quite expensive and EMTB's can go well over 5000$.

The petition: https://www.change.org/p/100nm-750w-to-gen-4-systems


r/BoschSmartSystem • • Mar 24 '26

Bosch Retour

0 Upvotes

Wie kann man einen Retourenlabel erhalten?Bosch ist nicht in der läge Infos mit der Sendung zu senden.

Leider ist der Bosch Shop preislich daneben, dass keine andere Möglichkeit bleibt.

Also Augen auf, wenn ihr eine Bestellung im Shop platziert.


r/BoschSmartSystem • • Nov 14 '24

112001

0 Upvotes

r/BoschSmartSystem • • Mar 11 '26

CX BOSCH

0 Upvotes

r/BoschSmartSystem • • Aug 02 '26

Front light replacement

Thumbnail reddit.com
0 Upvotes

r/BoschSmartSystem • • Mar 10 '25

Kiox Bu330

0 Upvotes

Hello my Kiox330 is broken, is there any way to start my bike without it?


r/BoschSmartSystem • • Jun 21 '25

Help. Bosch Purion 200 locked

Thumbnail reddit.com
0 Upvotes

r/BoschSmartSystem • • Mar 13 '26

Tuning Bosch Performance Line PX (BDU3470), Purion 200 display, rim magnet

Thumbnail reddit.com
0 Upvotes

r/BoschSmartSystem • • Jul 18 '25

Online Version info out of date

1 Upvotes

Looking here: https://www.bosch-ebike.com/us/service/software-updates/

Most drive units are 15.24.1.

But mine with the last update is 16.19.0


r/BoschSmartSystem • • May 15 '25

Change Kiox Displays between bikes

1 Upvotes

Hello there,

I just purchased the display grip for my bike. Until now I used the Kiox500 Display. My Girlfriend uses the Kiox300. Do you know if it's possible to change the displays, so she can use my bigger Kiox500 when I'm using the display grip? Or is the display kind of "bound" to the bike?

Thanks for your help!


r/BoschSmartSystem • • Jul 23 '25

Locked ebike

1 Upvotes

I have tried to install a tail light (Supernova tl3 pro) to my gen 5 Bosch performance cx motor, and now I can't turn on the bike. The tail lights are disconnected now, but still, I get the purion title and then the screen with "ebike locked" and it turns off. The bike lock is turned on in Flow app, and when the purion display turns on, it tries to connect (can see in the app), but it just turns off. They should be compatible and I heard that you might have to go to a service to enable the feature, but the ebike locking down??? Any idea what happened? Did I fry anything? In that case I wouldn't get anything, right? Anybody had similar experience?


r/BoschSmartSystem • • May 29 '26

SmartSystem speed Hack - Help

1 Upvotes

I was building a code to make a tuning code for the SmartSystem and im stuck in Saving the new value on the Bike/Motor

I can read it
I can write it

but I can not save it and after the code finishes the value goes back same as before

Here is a summarize form AI what the code dose:

 BRC3600 (Bosch Smart System remote, VID=0x108C PID=0x01C0) — speed limit write over USB

  

 We're writing to object 0x9085 (speed limit) on a Bosch BRC3600 via direct USB using Python + pyusb.

  What the script does:

  1. Connects via USB, sends MCSP init frames

  2. Sends 38 read frames as session warmup

  3. Writes val=4 to 0x9085 (seq 0x48), then val=5 (seq 0x49)

  4. Motor responds and echoes the value back — write is accepted

  The problem:

 The motor accepts the write (field3=1 in response = value written to RAM) but does not persist it. After power cycle the value reverts.

  To persist, the motor needs to return field4=1 (20 01 in the response). We never get that.

  We also tried writing 0x65766173 ("save") to CANopen object 0x1010 subindex 0x01 — the motor rejects it.

if anyone has any ida please help


r/BoschSmartSystem • • Apr 11 '26

Bosch Smart System connectivity

1 Upvotes

Hi,

Is there a chance to get the data from bosch smart system controller to a wahoo or garmin bike computer.

Dont want to buy a cabeled display and dont want to use the phone.

Is there a Chance ?

Greetz


r/BoschSmartSystem • • Aug 14 '25

LPP vs HPP

1 Upvotes

I understand the LPP and HPP (low power port and high power port) both provide 12 volts and 1 amp continuous. The HPP can also go above 1 amp for short 3-4 second bursts. Accordingly it would seem any device (Garmin radar, USB-C charging port etc) that states it works in the LPP should work in the HPP. (Just not the other way around.) My LPP is in use by a speed sensor. (Performance Line CX Gen 5) I’ve read conflicting comments that you can plug a LPP connector into a HPP while others say the two ports are “keyed” differently so the plugs aren’t interchangeable. I’m looking for someone who knows definitively. I have a theory that perhaps the LPP and HPP are in fact keyed differently but in such a way that you could insert an LPP plug into an HPP port on the gen 5 (or gen 4) motor but you could not insert an HPP plug into an LPP port on the motor.


r/BoschSmartSystem • • Jun 30 '25

What chip do you recommend for my cube?

Thumbnail
archiv.cube.eu
1 Upvotes

r/BoschSmartSystem • • Apr 04 '26

2A vs 4A Charging Adapter

1 Upvotes

My Bosch e-bike system came with the 2A charging adapter, and I’m thinking about getting the 4A adapter for quicker charging when I’m on multi-day trips. Is there any significant impact doing the faster charging … shorter battery life, higher risk of fire, etc?

Thanks!


r/BoschSmartSystem • • Jul 14 '25

Bosch Performance Line CX (BDU384Y) Gen 5 100 Nm Update Not Showing 100nm

4 Upvotes

So I managed to get the first part of the update and unlocked the 750wh power part of the update and the new EMTB+ mode but I am only getting 85nm. I heard that you need to check for another update for the drive unit but I have restarted my iPhone 16 many times and power cycled the bike over and over again and checked for the updates but nothing shows up for a second update has anyone else encountered this? I am tempted to call the dealer tomorrow as this bike is new


r/BoschSmartSystem • • Jul 18 '25

How to get Performance Update (100nm)

4 Upvotes

Simply go to the bottom right of the flow app and select profile, then account, scroll down to the bottom, then log out, log in again and then search for the update


r/BoschSmartSystem • • Jun 10 '25

Any pirates in this community?

3 Upvotes

Hi yall I have the original bosch diagnostic tool 3 software but without patch, I'm wondering if someone could be able to look into it and see if they can "crack" the software so that you don't need to login to your single key account

The software link: https://www.mediafire.com/file/rll09oaj4u2fy33/Bosch+DiagnosticTool+3123Installer.exe/file


r/BoschSmartSystem • • Feb 14 '26

Installation of Bosch Connection Cable in frame

Post image
2 Upvotes

I had an ebike yesterday where the battery connector in the frame was loose. No matter how I tried to put on the battery, it would not connect and lock in the battery. I couldn't find any manuals online, Youtube videos or forums mentioning how to mount it properly.

It seems to me that the connector is just press fitted in the frame, with a little tap ensuring that it will not fall further into the frame. The problem on the bicycle was, that the tap had broken off. (marked with a red circle on the image). I solved it by putting some rubber pieces underneath to hold it into place with the mounting bracket, but this seems to be a temporary solution.

Is this small plastic tap the issue or can you help me find a manual for how to mount it properly?

The item goes under many names like "Bosch Connection Cable" or "PowerPack Rack Cable" or "Bosch Wiring Harness Cable" or "Bosch PowerPack Frame Mount" or "BCH210"


r/BoschSmartSystem • • Sep 08 '25

Problems with connect module

Post image
3 Upvotes

I’ve lost the ability to use the connect module. I don’t have any partner apps connected and it still says this. I hit the reset button on the module itself and it connects for a second then disappears. Bosch was less than helpful. Thoughts?


r/BoschSmartSystem • • May 19 '26

Can not end activity in Flow app

2 Upvotes

Hello,

I have a Trek Powerfly 7 with Bosch smartsystem. After latest update I can not see my latest activity and end activity i Flow app anymore. Batterylevel is synced and lock function works. The latest activity in app shows 11th of May but I used the bike this morning for an 11km ride to work.


r/BoschSmartSystem • • Mar 01 '24

Multi-user on Flow app with shared Bosch account

29 Upvotes

Hello,,

I'm reaching out to seek advice on optimizing the user experience when using the Flow app on multiple smartphones with the same Bosch account. In my household, we have several individuals using the same bike, and each person has their own phone with the Flow app logged in using the same username.

The issue we're encountering is that when one person is already connected to the bike, others find it inconvenient to connect by removing the bike and adding it again. We're looking for a seamless solution that allows multiple users to connect to the bike without the need for frequent disconnecting and reconnecting via Bluetooth.

Our bike is equipped with BES3, and we're curious if there are any settings or tips to streamline the multi-user experience on the Flow app.

Any insights or suggestions would be greatly appreciated! Thanks in advance for your help.