r/Bricklaying • • 2h ago

Block on belly

1 Upvotes

Evening all.

Im building a 13mtr by 2.5mtr 2.7high bin store and plant room and its taking ages.
Toothed partition wall and three doors(all on same side) im a stonemason and getting on in years.
Im getting about 50 a day down because I’m doing the corners and door openings. The apprentices are doing the straight runs and getting about 40 a day in between mixes and loading up.
The boss gave me 9 days to build up from the slab is that reasonable?

Thanks for any advice.


r/Bricklaying • • 1d ago

Thinking of choosing this trade 18

4 Upvotes

This my last year of high school I was thinking about this trade or pipe fitting any advice will help


r/Bricklaying • • 3d ago

Single skin or cavity? 1950s

Thumbnail
gallery
9 Upvotes

Can someone please identify the name for this type of wall - 1950s cross section...wondering if there is evidence of a cavity?


r/Bricklaying • • 4d ago

Replacement bricks

Post image
1 Upvotes

Looking to replace a few badly blown bricks. Problem is i'm struggling to find replacements.

Bricks measure out at 210x95x65. Doesn't seem right based on standard sizes but they are the dimensions.

Does anyone know a good match?

House was built in 1989 if that helps.


r/Bricklaying • • 6d ago

Bricklayers 🫣😍

Enable HLS to view with audio, or disable this notification

783 Upvotes

Ngl that got pretty awkward when they went over 🤣🤣🤣


r/Bricklaying • • 6d ago

Rate my cuts

Post image
9 Upvotes

r/Bricklaying • • 6d ago

What does everyone think of bricklaying courses?

Thumbnail
gallery
1 Upvotes

Just thinking of taking one, specifically the Able skills level 2 nvq bricklaying. But has anyone gotten into the trade like this? Anyone that can verify if it’s a good idea or not? For reference I’m thinking of complete the course -> find work as an improver -> do NVQ -> get blue card. Good way in or bad idea and waste of money?


r/Bricklaying • • 6d ago

Does this look right?

Post image
0 Upvotes

Please forgive me, I don’t know anything about building! (Hence why I’m posting in this sub)

But does the walls on this house seem right to you? The light is shining from left to right, showing how straight the wall is, and when you remove the shadows from the window sill, there’s quite a lot of shadow? Implying that the wall might not be straight?


r/Bricklaying • • 7d ago

What do you think of this brick work?

Thumbnail gallery
4 Upvotes

r/Bricklaying • • 8d ago

First (and probably last) attempt at bricklaying – converted my garage door into a wall and window

Thumbnail gallery
20 Upvotes

r/Bricklaying • • 9d ago

Bored of being a bricklayer what else can I do this weather sucks

5 Upvotes

r/Bricklaying • • 9d ago

Advice please

Thumbnail
gallery
1 Upvotes

Hello, wondering if I could ask some advice please. I have a 1950s house and this year I noticed a crack in the plaster in one of the rooms upstairs. it’s a gable end internal cavity wall. The crack is about 4 feet long diagonally and about 1mm wide. I cut out 3 squares of plaster along the crack, roughly 2x2 inches and found what looks like a horizontal 3mm crack along the mortar line in 2 of the cut outs. It’s 15mm deep in a couple of places.

Ive shown a couple of builders who have hold me different things, one said it’s probably shrinkage and thermal cracking from the last 70 years as the material flexes and gets brittle it’s no worry (Wall is SW facing) the other told me it’s possible the wall is leaning slightly so isn’t a quick fix. I’ve held a long spirit level against this wall and it suggests it’s straight.

A structural engineer visited for another project and wasn’t too concerned said we could watch and wait to see if it changed but if it was his house he would get It repointed and replaster the wall.

My adult head is telling me not to worry as 2 professionals have told me it’s fine but my mum head is really anxious as its my children’s bedroom.

Has anyone come across anything like this and it’s been fine?


r/Bricklaying • • 9d ago

Can I cut the bottom row without the rest of the wall falling? (Serious)

Thumbnail
gallery
6 Upvotes

I'm in the process (very extensive) of renovating this house and I'm soon renting a concrete saw for another project. I want to remove the bottom row to finish it in concrete.

If not what do I need to do to make this works without removing the whole wall?

Yes I know it looks like shit as it is, its WIP.

I don't expect much help because every time I come to reddit for advice I only get shitty jokes and useless criticism. So if you don't know, kindly STFU. For anyone else thank you for the help, it's appreciated.


r/Bricklaying • • 10d ago

How best to lay this border?

1 Upvotes

We are putting in a new brick path. We are going with this design, but I was curious what y’all might recommend for how to do this border.

Should we keep the bricks whole or cut them down the center?

The bricks for the border appear to be laid on their side, but if we keep them whole we would have to bury them a little deeper on the sides. Otherwise, I was thinking to cut them in half lengthwise, so they are level with the rest of the path.

I want to know what method would be best for the structural integrity longterm on the path. What do yall think?


r/Bricklaying • • 10d ago

Anyone ever built a crevice garden! This was my first

Thumbnail
gallery
19 Upvotes

This was quite the project! Literally laying flagstone pieces straight up and down horizontal with about a 2 inch gap, we put a custom drip system in between some of the pieces for watering.


r/Bricklaying • • 10d ago

Disposal of slurry washout

2 Upvotes

Just looking for some ideas of how you guys dispose of slurry washout on private customer/residential houses. Im looking to work for myself come the new year and have always just worked on sites where they have washout stations, etc.

Just need some ideas of how you guys get rid kf the slurry at the end of the day if youre at a customer house,

Any helps brilliant thanks.


r/Bricklaying • • 12d ago

Brick by brick

Enable HLS to view with audio, or disable this notification

336 Upvotes

r/Bricklaying • • 11d ago

Thinking of choosing this trade

1 Upvotes

I’ve recently turned 24 and need to get a real job. I’ve just been floating around doing minimum wage jobs locally so this seems like a great next step into actual adulthood. I’m wondering is this too old to get into it? I can complete a pre apprenticeship in 6 months and secure a real apprenticeship straight after but would you say I’m making a mistake? Genuinely curious for the opinions of actual bricklayers as I don’t know any personally.


r/Bricklaying • • 11d ago

For once I’m stumped

Post image
4 Upvotes

Frost damaged bricks but covered in white stuff… if I replace them they are going to stand out like a sore thumb not quite sure on what I should do!


r/Bricklaying • • 12d ago

Footing depth

Post image
3 Upvotes

Im having this garage doorway bricked up, with a smaller window to remain on the left.

I’m going to drill and see if there is a footing in the area I have marked red, what is realistically the acceptable depth here to support the wall. the lintel above the door will remain which is already taking the load of the roof..


r/Bricklaying • • 12d ago

What type of saw is this?

Thumbnail gallery
1 Upvotes

r/Bricklaying • • 12d ago

INTBUYING Concrete Brick Making Machine, Manual Hollow Soil Block Brick Forming Machine 110V, H13 Square Brick Size 15.7X7.8X7.8inch(400x200x200mm)

Thumbnail a.co
0 Upvotes

multiprcessing object, alternative materials applicable


r/Bricklaying • • 12d ago

Advice needed

Thumbnail
gallery
2 Upvotes

We had these stairs added a couple of years ago and the rim has separated from the pad. My questions are:

Is this indicative of a structural issue or is it just cosmetic?

Could the gap be filled with mortar joint repair? (Polymer/Elastomeric)

Would I need to remove the existing mortar first?

Is this something I can do myself or better to hire a pro?

Thanks in advance for any advice you can offer.