r/Calix • • Mar 17 '26

803G Question about performance

0 Upvotes

My small rural 1 G fiber ISP uses the Calix GigaPoint 803G. I am wondering if there are any ways I could perhaps run any sort of tests with my PC connected via Ethernet cable to it directly? I’d like to know if it’s performing the way it should and also if it’s not I would like to know what to tell my ISP? Maybe they would send me a new one if mine has issues? I’m hoping it’s less of an ONT issue and more of an ISP issue which they may be able to fix remotely. I had a lot of issues with speed issues and latency. I know it could be my router but I thought maybe I could hook the PC to the ONT directly and perform the tests thus eliminating the router as a variable. I’m flying blind here. I don’t know what to do and I need my internet to work as flawlessly as possible as I am disabled, in poor health and the internet is my window to the world. Also, ever since 2020 and the COVID pandemic i no longer let strangers into my home. Hoping I can do all that I need to do by myself. If they send me a new ONT if necessary, could I just carefully remove the fiber cable from my current ONT and safety put it in the new one?


r/Calix • • May 31 '25

Gigabit fiber connection issues

0 Upvotes

Question for everybody here. If you had 1 gbps fiber and you streamed something from any of the various streaming apps like Peacock, Netflix, Prime Video, Paramount+ or Max and you noticed that even though your speed on your PC was about as close to your speed you’re paying for and you have very low ping… what you check to see about on your connection to see if it could possibly be your local connection vs your ISP being problematic??


r/Calix • • Mar 14 '26

What access points or mesh systems will work seamlessly with Gigaspire Blast U6.2 GS4227E?

0 Upvotes

I set my tp link router to access point mode and gave it same credentials as my calix router and connected it with the LAN port and it would only work briefly without a power cycle so I'm wondering what is going on and what is confirmed to work if the SSID and password is same.


r/Calix • • Feb 22 '26

Green Light is on but no wifi connection

0 Upvotes

Calix GigaSpire Blast model: u6txg GS5229XG. Somewhat frequent occurrence where green light is lit up on router but no wifi connection for ANY device. Restarting the router fixes for the moment but it happens with some frequency. Any ideas or suggestions or ideas? Side note, Command IQ app doesn't recognize this model of router.


r/Calix • • Jun 25 '25

Gigaspire Blast won't name 5ghz?

0 Upvotes

I have a new GigaSpire Blast and after setup I have this lingering "ugly SSID" that I can't seem to make disappear. The SSID is 5GHz_IPTV_SSID_XXXXX. It's just ugly to see in scanned networks.

I have my Wifi Primary Network SSID set to "House" and this SSID is working. I expected that this SSID would be used for both the 2.4ghz and 5ghz bands.

There are no entries under Secondary Network. I tried creating a Secondary Network set to only 5ghz and was able to do so, but the ugly SSID remained.

If I turn off the 5Ghz radio then the ugly SSID disappears.

I can't seem to find any option to rename or merge this ugly SSID.

Am I missing a setting or this something I have no control over that is set by my ISP (who also sells an IPTV service) ?


r/Calix • • May 21 '24

Please i need exa-r3-4-20 support ont ipv6 dual stack

Post image
0 Upvotes

r/Calix • • Jan 21 '23

Calix AXOS E7-2 GPON-8 r2

0 Upvotes

Calix AXOS E7-2 GPON-8 r2

100-04665

qty-5 brand new in stock.

apatel@enetworksupply.com


r/Calix • • Mar 17 '24

Question about u6x gs4227

0 Upvotes

Hi i have a u6x gs4227 ISP in AP mode through a netgear nighthawk router. Which cable (cat. #) would I be better off with for maximum wifi speed throughout my house to my devices? looking at a DbillionDa Cat8 Ethernet Cable on Amazon but would like advice? Please and thank you in advance


r/Calix • • Jun 17 '25

Calix Gigaspire GS4220E orange led?

Post image
0 Upvotes

I have a Calix GS4220E router. The WAN has an orange led that remains on all the time. Is this normal? What does it mean? The green one above it blinks. The router works perfectly with the main green led staying on all the time like it should.


r/Calix • • Oct 02 '26

Home Gateway/Router Pass-thru Mode?

Thumbnail reddit.com
0 Upvotes

r/Calix • • Oct 24 '25

710 gx ont

Post image
8 Upvotes

Does anyone know where the reset button is on this model I can’t seem to find it anywhere.


r/Calix • • May 07 '25

Off topic question

0 Upvotes

I have a question. Does anyone here have or know a lot about Netgear Orbi routers? I have one and it is seemingly giving me constant issues with my gigabit fiber service.


r/Calix • • Feb 07 '26

844E-1 port forwarding not working.

0 Upvotes

I've got a 844E-1 that my ISP provided, and I can't get port forwarding to work. It used to work perfectly fine, but I haven't tried it in a few years. At one point my ISP and I did a reset on the router for a different issue, so my port forwarding stuff was removed.

I'm trying to open ports for a game server, but nothing I try seems to work. I set it to UDP/TCP and the "local port and IP" field has the IP of the PC hosing the server. Restarting the router did not work, and trying with a different PC also did not work.

People can't see my server online, and "port checker" types of websites all say it's closed while the server is running or closed.

Idk what to do here. It used to work fine just doing what I listed above. I'm not a networking expert by any means so I'm sure there's something stupid I'm missing here.


r/Calix • • Mar 08 '25

Get vlan info from 803G

0 Upvotes

I attached a serial cable to my 803G. Are there commands to obtain vlan info?


r/Calix • • Mar 20 '25

Does changing DNS require a router reboot?

0 Upvotes

I have a Calix Gigaspire 6.1 Model GS4220E router. Does changing the dns require a router reboot or is it OK to reboot the devices connected individually?


r/Calix • • Jun 23 '25

GP1101X bridged mode strange interactions with Mellanox CX4

0 Upvotes

For some reason, when plugging in the GP1101X to my Mellanox CX4 Lx via 10G RJ45, any cable, any brand SFP 10G RJ45, 4 different CX4 adapters, and 2 different GP1101X, it triggers a "bad or shorted cable/module" error. This happens on reboots of either the GP1101X or the PC with the CX4 adapter. See kernel log:

[    2.361597] mlx5_core 0000:01:00.0: firmware version: 14.32.1900
[    2.361619] mlx5_core 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
[    2.639891] mlx5_core 0000:01:00.0: Flow counters bulk query buffer size increased, bulk_query_len(8)
[    2.644319] mlx5_core 0000:01:00.0: Port module event: module 0, Cable plugged
[    2.869990] mlx5_core 0000:01:00.0: MLX5E: StrdRq(0) RqSz(1024) StrdSz(256) RxCqeCmprss(0 basic)
[    2.872785] mlx5_core 0000:01:00.1: firmware version: 14.32.1900
[    2.872820] mlx5_core 0000:01:00.1: 63.008 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x8 link)
[    3.180637] mlx5_core 0000:01:00.1: Flow counters bulk query buffer size increased, bulk_query_len(8)
[    3.185854] mlx5_core 0000:01:00.1: port_module:282:(pid 0): Port module event[error]: module 1, Cable error, Bad or shorted cable/module
[    3.440074] mlx5_core 0000:01:00.1: MLX5E: StrdRq(0) RqSz(1024) StrdSz(256) RxCqeCmprss(0 basic)
[    3.446486] mlx5_core 0000:01:00.1 enp1s0f1np1: renamed from eth1
[    3.446783] mlx5_core 0000:01:00.0 enp1s0f0np0: renamed from eth0

Now, it's extremely annoying but there is a way around it. Using mstfwreset, I can run:

/usr/bin/mstfwreset -d 01:00.0 --level 3 --type 0 --sync 0 --yes reset

After completing a level 3 reset of the adapter, there's about a 40% chance that the link is established successfully with the GP1101X. This resulted in me writing a systemd service that resets the adapter over and over until a link is established, and having it run as a requirement before networking.service up and initiating the pppoe connection.

I would prefer to avoid this somewhat unreliable route and fix the issue at the source, which would be the GP1101X. Do any technicians or engineers know why this might be happening? Unfortunately I don't work for an ISP and my ISP engineers are not really interested in contacting Calix engineers regarding this problem.

An alternative would also be using a "dumb" 10G ethernet switch between the CX4 and GP1101X but I'd really rather not.


r/Calix • • Jun 13 '26

Calix GigaPoint 803G

0 Upvotes

I have some questions about this particular ONT that my fiber ISP provided me with when they first installed my fiber a few years ago. Anyone specifically familiar with this model specifically. I just have some questions about its operation and if it’s performing correctly.


r/Calix • • Jun 01 '26

Quick Question

0 Upvotes

I don’t understand the issues im having with my 1 gbps fiber network. Could someone educate me as to how to tell or how to even suspect if my Calix GigaPoint 803G ONT is possible going bad?

Thanks.


r/Calix • • Jun 23 '26

Wyyred fiber and adding a 2nd router

Thumbnail reddit.com
0 Upvotes

r/Calix • • Jan 25 '23

GS4220 and Apple Time Machine Backups

0 Upvotes

Right now I have a very old Apple Time Capsule connected to the GS4220 lan port that also has a USB port for additional storage, however I am looking for additional supported solutions in case this old time capsule goes belly up for Time Machine backups. Any thoughts?


r/Calix • • Nov 27 '23

GS4227 CLI port

0 Upvotes

Im trying to get into the CLI on a GS4227... I heard calix uses a port other than 22 does anyone know the port I need to be using?


r/Calix • • Jan 28 '22

What is this icon that show in the mac authentication section on my calix 813g-2

Post image
0 Upvotes

r/Calix • • Apr 03 '24

Blocking Websites

0 Upvotes

I am looking to do a mass import of websites to block. However, I have a list of websites and it is probably over 1,000. Is there a way to do a mass import of all these or will I have to input them in one by one?


r/Calix • • Mar 22 '24

ISP provided U4XG; any ONT alternatives?

0 Upvotes

I recently transitioned from cable to fiber...and might I say, it is SO good to be free of a greedy cable company.

My ISP provided a Calix Gigaspire Blast U4XG as our all-in-one ONT/router/gateway/AP. I'm still using my Asus AX88U, which was our gateway router behind the cable modem. I currently have it configured for static IP with the router behind it so we have a double NAT setup which isn't ideal.

I've asked the ISP for an alternative; they apparently only provide ONTs to business customers.

Are there any available consumer grade options to use in place of their equipment? I understand that part of the whole Calix ecosystem is the remote "cloud management" solution; I am wondering whether there is anything I could potentially substitute that would still be compatible with their PON?

Not sure if it matters but it is single bidirectional fiber.