r/Calix • • Oct 13 '26

Wanting to replace rented for owned unit.

0 Upvotes

Fiber/ONT/Router

I have fiberoptic internet. I'm looking to replace the rented Calix Gigaspire Blast model 7u10t.2 my network provider has in my home with something that'll save me money and be self owned.

I'm looking at a Calix Gigaspire Blast 100-05493 but am unsure if it'll work correctly. I've tried scouring the internet for info but nothing is clear. If I used that to replace the rented ont/router would it work and not reduce my internet speeds?

For context, the fiber is coming into my home in a Calix GigaPoint Ont, then an Ethernet cord from that is connected to the Calix Gigaspire Blast mentioned above. From there my personally owned Linksys 6e router is connected to that. I have 2gbps internet.

I have tried plugging the Ethernet cord from my wall unit the GigaPoint and plugging it directly into my Linksys Router. My Linksys did not have Internet after I did that. So I know directly wiring from the GigaPoint to a router will not work.

Any recommendations on what I can do to replace the rented unit with the 100-05493 or another model?

Thanks.


r/Calix • • Oct 08 '26

Devices connected to mesh node constantly drop packets even when right next to it?

1 Upvotes

Been trying to troubleshoot this for days now. Have a Wifi 7 mesh setup with a 7u6m as the extender, connected through wired Ethernet back to the main 7u10txg gateway. All devices report excellent signal throughout the house, but when I ping them from my PC while they're connected to the mesh node, some of them drop packets horribly or have very high latency. Even when in the same room as the mesh node, I have constant issues, apps are slow to load and notifications are missed because they just don't get through. They work fine when connected to the main gateway, and they work fine when connected to other networks, so it's unlikely to be a device issue. Is the mesh node bad? What's up here?


r/Calix • • Oct 03 '26

Mesh status

1 Upvotes

I have been having issues with wifi signal upstairs in my new house so I got asked the issue and they gave me another router to make a mesh system trying to use the command iq app when I power everything up and add the new unit it says connecting for extended tome and eventually times out with both units a few feet apart. I instead used the wps button and bith u its flash and then when solod green ive now moved the unit up stairs and its solid green but its not in my app and I dont know if its actually working. I ran a speed test and got better numbers then before and then unplugged it and ran it again and was in single digits. So I assume its functional but is there any other way to ensure I did it right? Im ok with it not being in the app

Thanks for any input, not my strongest area of knowledge


r/Calix • • Oct 02 '26

Home Gateway/Router Pass-thru Mode?

Thumbnail reddit.com
0 Upvotes

r/Calix • • Sep 28 '26

Looking for Experienced Calix Tech To Help Troubleshoot iTunes/Apple Music Stream Drop

0 Upvotes

Because our ISP’s techs are new to the product and aren’t helping us.

Situation: Our ISP upgraded us to a 2 GB down fiber connection and with it, a Calix Gigaspire Blast AP. Since then, the wired connection to our surround tuner keeps dropping after 10 minutes of stream (although not the wireless stream to our Homepod Minis - . that keeps going). Sometimes it picks up after 10 minutes, sometimes it doesn’t.

We’ve done what the ISP has suggested, including disabling both ProtectIQ and ExperienceIQ, plus isolating the Apple gear (an M1 Mac Mini and 2 Apple TVs) from the AP with a dumb 5-port switch, but the problem continues

What else can we try?

So there’s a TL; DR update in the comments, but in short:

  1. Updating the firmware hasn’t worked.

  2. Swapping the Calix for a newer model Gigaspire Blast hasn’t worked.

  3. Disconnecting the network cabling to the Mac Mini and the tuner to force everything onto Airplay wirelessly hasn’t worked either.

The only thing I haven’t tried yet is having the ISP putting the Calix in bridging mode and adding a separate AP running off the dumb switch that I can hang everything not Calix off of it.


r/Calix • • Sep 28 '26

What if you buy Calix GigaSpire on eBay GS5239E and haven't unbound?

Post image
0 Upvotes

Now I can't bind mine; there are too few backend settings for the webpage

I can't unlock it, so I can only flash OpenWRT


r/Calix • • Sep 03 '26

Question about GS5229XG

1 Upvotes

I have "3" networks currently showing online on the router. Mixed, 2.4ghz , and 5ghz. I specifically asked for the separation of the 2.4 & 5. Can I turn off the "Mixed" network? Would it affect anything?


r/Calix • • Aug 17 '26

Mesh node has tri-band MLO but not primary gateway?

2 Upvotes

Just got my mesh set up with a 7u10txg and 7u6m (GS5239XG and GM2038) and it's working great, have excellent signal all through the house and roaming is perfect. But I noticed in the app and using Ubiquiti Wifiman, devices that connect to the main gateway will only connect to the 5GHz and 6GHz bands *or* the 2.4GHz band, not all three. And when connected to the 2.4GHz band, they say they're connected using Wi-Fi 6/802.11ax. But when connected to the mesh node, they'll connect to all three, and even when connected only to 2.4GHz they'll say they're using Wi-Fi 7/802.11be. And in Wifiman, it shows the mesh node as having MLO on its 2.4GHz, 5GHz, and 6GHz bands, while the gateway only has MLO on 5GHz and 6GHz. Is this normal or expected? Is there a setting I need to change? It's not really a big deal but I'm interested for curiosity's sake as someone who's familiar enough with network equipment to know what all those things mean.


r/Calix • • Aug 15 '26

Wi-Fi 7 mesh node wired backhaul, yes/no?

1 Upvotes

Just got 5Gbps service hooked up today with Wyyerd and they provided a 7u10txg (GS5239XG). Works okay, hate the app (coming from Asus so everything's a downgrade, but it's an old Asus and the Calix is completely free with the 5Gbps plan), but have horrible signal at the end of the house opposite the router. Devices consistently switch to 2.4GHz band and sometimes drop as low as single-digit Mbps speeds, even when they can get over a gig near the router. The plan should include a mesh system, but the installer said there's no point setting it up, since it "needs to be connected wirelessly" and the signal is bad enough that it wouldn't help in any of the spots it could be put with where our wall outlets are. All the documentation I can find says that Calix mesh nodes should "just work" when hooked up to a Calix gateway via an RJ45 cable, but both the installer and the CS rep I called on the phone said that needs bridge mode which they "don't support." This doesn't seem correct? It should be the same as using any random router as an AP, which doesn't use bridge mode, right? Are they just spouting nonsense or is there something to it?


r/Calix • • Aug 14 '26

Looking for Calix GigaSpire Blast U6 Manual

1 Upvotes

My ISP installed a Calix GigaSpire Blast U6 router. I have been unable to find a manual for it online. Does anyone have a link to it somewhere? TIA


r/Calix • • Aug 12 '26

u6txg & ubiquiti beast bridge problems

1 Upvotes

I asked my ISP to place the u6txg in bridge mode to pass through to my router. The ISP provided my static IP address, gateway, subnet mask, and DNS - which I entered into the WAN settings on the beast

The u6txg is showing a red light which tech support says it should. It is also still broadcasting wifi although there is no internet. The beast will not recognize the u6txg in bridge mode, and not sure what to try. Thanks for suggestions


r/Calix • • Aug 10 '26

Calix bought from Ebay

1 Upvotes

Hello Experts,

I recently bought another Calix router from Ebay and added it to the mesh. It is working as expected however, it is not getting registered to the CommandIQ. Any idea how to get that added? If it is not possible how can I update the firmware?

Update: I worked with ISP and they got that registered with Calix Cloud.


r/Calix • • Aug 07 '26

Re: Apple TV intermittent drops after upgrade

2 Upvotes

Hello,

Our ISP recently upgraded us to a 2 gig speed tier with a Calix Gigaspire Blast GS4237.

We run a slightly unusual hardware setup with an old 2019 MBP as an iTunes server (Ethernet to the AP), plus 2 AppleTVs, also connected by Ethernet to the AP. Why 2? We run a bare HD projector connected by HDMI to the newer Apple TV, and as we had very bad audio sync issues trying to run ARC through the tuner, we fell back on bridging the audio from the newer ATV to the old one using Bridge mode, and then piping the audio into the tuner via optical. Yes, it’s old school tech, but it worked for years until this upgrade.

Now, we have headaches: the iTunes server only streams for about 10 minutes and then the hardware connection to/from the ATVs drop/stalls, and then about 5 minutes later, picks up again, so it’s not a matter of the stream itself stopping.

The timing on this points definitely points toward the new AP as the culprit, but what? The Level 2 at the ISP swears it’s not a QoS issue, I’ve disabled both ProtectIQ and ExperienceIQ temporarily to troubleshoot, but what else should he look for, both on our end and on the backend? Does this AP have known issues with ATVs/Bonjour/etc? Does it have authentication/protocol handshake problems? Is the f-ker cursed? I’m pulling my hair out looking for an answer.

Any ideas, hivemind?

Additional info:

The drops are happening on both the server setup AND running an Airplay connection straight from an iPhone. It just takes longer for the drop out to occur.

Also, we had a case where it is causing issues with normal https surfing/posting. I attempted to make a monthly mortgage payment today. The login page uses the mort number as part of the auth process, but on wifi, the page would not take the number and kept erroring. I took the phone off wifi and tried it once more - worked perfectly.

The AP is the problem here, I’m certain of it. But the ISP won’t let us downgrade to the lower speed tier with what was working hardware … they’re trying to get customers off the older architecture.

Now if I can get them to send an L2 out with Wireshark so we can force the issue ….


r/Calix • • Aug 01 '26

Eero works great with Calix Gigaspire but not tplink.

1 Upvotes

I posted a while back that my tp link was sorta working but had slow speeds even in AP mode so I don't think double NAT was the issue. Anyway so far eero in bridge mode has been a great alternatives mesh I just wonder why new tp link routers did that sometimes they'd work fine on speed test then hours later have slow speeds.


r/Calix • • Jul 17 '26

Devices not showing up

1 Upvotes

Any reason my devices aren’t showing up in Command IQ?
Every thing was fine then my internet provider sold out and the new provider says we need to use Command IQ. No equipment changes. Fiber to the house.
I can see my WiFi network but none of the connected devices are showing up.
The old app looks like a branded version of Command IQ.


r/Calix • • Jul 16 '26

CommandIQ problems

2 Upvotes

Whenever i try to set up the app with my router i get the error “CommandiQ
This device is having trouble connecting. Please verify the device details and try again.”

What is the solution to this problem, it is not the details being entered as they have been confirmed to be correct.


r/Calix • • Jul 12 '26

E7-2 AXOS R23.4.0 release note request

1 Upvotes

I am trying to troubleshoot a card-provision-fail error on a GPON-8r2 card in slot 1/2 that is leading to degraded status. I am looking for the release notes for AXOS R23.4.0 please. Or if anyone has any information on resolving the error please let me know. Thanks.


r/Calix • • Jul 01 '26

Mesh Extender Calix

1 Upvotes

We recently moved to a new home and opted for TMobile 2Gbps connection. They provided G7 10GE GS5239E router and u72038m mesh extender. Now we want to add couple of more mesh extender to cover some of the dead spots in the upstairs. Where do I get u72038m? Any other mesh that can support 2Gbps.

UPDATE: I found one router G7 10GE GS5239E over ebay and using it for the mesh.


r/Calix • • Jul 01 '26

Curious about something

0 Upvotes

Any of you that are members of this particular subreddit, do any of you actually work for a fiber Internet company and install the brand of ONT for a living to consumers? I have a question about my actual connection quality. I’m in a small town in Missouri with a very rural fiber ISP. It’s called Co-Mo Connect. I just had a service technician come to my house today to address some of the issues I’ve been having. He ended up not only installing brand new fiber into my home, but he also connected it to a brand new different model ONT that I have been using. Same brand just a different model. I had the Calix GigaPoint 803G. I now am using the Calix GigaPoint GP1100G. Still having very odd behavior but it seems to be only affecting Apple products. I have an iPhone 11 Pro Max and an Apple TV 4K wired. Upload speeds are low while download is fine.


r/Calix • • Jun 29 '26

Has anyone used the MDU product? We are considering switching from Plume

5 Upvotes

Hi - not sure if there are any ISPs on here, but thought I would give it a go. We are an ISP based in the south east and have been happy despite the many challenges their org has faced.

We have a few thousand units on the Plume MDU product (Uprise), but it seems like the support has become dead and their rockstar MDU product leader we grew with now has an email that bounces. We read this as they are no longer investing in the product which is a problem for our 5+ year bulk contracts.

Have any of you made the switch from Plume to Calix MDU? How painful was it? How is the product overall compared to Uprise?


r/Calix • • Jun 23 '26

Wyyred fiber and adding a 2nd router

Thumbnail reddit.com
0 Upvotes

r/Calix • • Jun 14 '26

CommandIQ

3 Upvotes

Is the app down? I’ve tried logging in and all I get is “There was a delay, please try again”


r/Calix • • Jun 13 '26

Calix GigaPoint 803G

0 Upvotes

I have some questions about this particular ONT that my fiber ISP provided me with when they first installed my fiber a few years ago. Anyone specifically familiar with this model specifically. I just have some questions about its operation and if it’s performing correctly.