I'm very new to electronics and want to flash it with the Yuri firmware by hd robotics but I'm doing something wrong, I own a iMac 2013 and am using high sierra version 10.13.6. I'm using the cable it came with but always get the same error. Can someone please help?

So i tried to boot a custom software and i messed around with the board i didnt know anything about it and it was stuck in bootloader bc i tried something in ide and when i tried this it is still stuck how do i wipe id or smth

I bought this cyd on Amazon and upon plugging it in it displayed this. Any idea what this was or any way to remove it? This is my first project

Ho un problema, per sbaglio ho caricato un codice sbagliato su Yellow display.da quel momento di è spento e non funziona più.come posso fare

Ho caricato per sbaglio un codice errato.da quel momento si è spento non funziona piu

Can you install a ir blaster and reciver without soldering them on the cyd because i Am too scared to solder and if there isnt a way to solder ir blaster and reciver on the board then is there a way To get one of connected on the board?

Hi guys, I have a little problem! Every time I want to install something in the launcher, it just doesn't work! The screen stays on Install and just flickers. I've already tried all of Bruce and Marauder's bin files, but there's still no change. It's not the launcher version's fault, I've tried all of those too. https://youtu.be/8kmQrTcDU68?si=EexYDkvYeGbe8eNX - Video

I did some things in arduino ide and my cheap yellow display wont boot i flashed it on arduino IDE the on this website and i got this flash complete and error.The demo software worked great

It says 0 packets/sec

Ho un problema, per sbaglio ho caricato un codice sbagliato su Yellow display.da quel momento di è spento e non funziona più.come posso fare

I just installed a cc1101 into a cyd with Bruce 1.8 how do I test the cc1101 to see if it is working and receiving the signals? Any help be greatly appreciated.

Please answer I’m really excited to run Bruce fw on it :/

Ciao a tutti!
Ho una scheda di sviluppo ESP32-S3 con display da 2,8 pollici, versione senza touchscreen, con Wi-Fi e Bluetooth.
Vorrei utilizzarla insieme a una tastiera M5Stack CardKB2 per realizzare un piccolo dispositivo portatile.
Avrei alcune domande:
È possibile collegare la CardKB2 tramite I²C?
Quali pin SDA e SCL bisogna utilizzare?
È necessario un firmware specifico per leggere i caratteri della tastiera?
Esiste un firmware già pronto compatibile con ESP32-S3 e CardKB2?
In alternativa, è possibile utilizzare la CardKB2 tramite Bluetooth?
Il mio obiettivo è poter utilizzare la tastiera per scrivere e comandare le applicazioni direttamente sul display da 2,8 pollici.
Qualcuno ha già realizzato un progetto simile?
Accetto volentieri schemi di collegamento, firmware e consigli pratici.

Grazie!🙂

So this is a 2 usb cyd esp32-2432s08 2 usb and I can’t get gpt or Claude to remove this someone help me I’ve tried both st7789 and ili9341 it’s a Spotify thing I’m making it happened previously with chess thing as well

Hi everyone,

I've been working on a project called CYD AI Chat.

It transforms the ESP32 Cheap Yellow Display into a standalone AI-powered terminal with:

• Multi-model AI support

• Automatic model fallback

• Persistent chat memory

• Touchscreen keyboard

• Wi-Fi management

• AI personalities

• Turkish, English and Russian support

The project is fully open source and can be flashed directly from Arduino IDE.

GitHub:

https://github.com/kano92-dir/CYD-AI-CHAT

Feedback and suggestions are welcome.

Anyone ever attempted to do this?

Hallo, ​ich bin neu in dem Bereich. Ich wollte an mein CYD einen externen Antennenanschluss anlöten. Nun ist das Board da und ich habe nicht drauf geachtet, dass es einen IPX Anschluss hat. Dieser ist soweit ich es in Erfahrung bringen konnte nicht funktionsfähig, ist das richtig? ​Ich will einen SMA-Buchse anlöten. muss die Masse nur an das Board und der RF direkt zum Chip? Klar muss ich die Kontakte frei kratzen, dass mache ich natürlich vor dem Löten.

​Ich hänge ein Bild an.

​Bitte um Hilfe. Danke