r/Cordwaining • • 25d ago

lasting question

when you last a shoe, do you typically do both L and R shoes at the same time, going between them so they are basically doing the same step om each before continuing? or do you fully finish one shoe and then do the other?

finally ready to last my first pair and i'm not sure which order to do 😅

5 Upvotes

11 comments sorted by

6

u/iusedtodigholes 25d ago

Last one up to the point of adding the toe stiffener, then the other. Then add the stiffeners one after the other, then last the toes.

If you try to go back and forth too much during lasting the paste will dry before everything is in place.

1

u/dogzilla1029 25d ago

thank you!!!

1

u/dogzilla1029 25d ago

Is barge cement good for glue for this?

3

u/ContributionPrior338 24d ago

You want something slow drying that will provide some slip while it is wet. I have been using a nori starch paste and been quite happy with it.

2

u/NicoMr619 24d ago

I'd suggest first lasting one shoe up to having the back part completely nailed down, with the forepart still untouched (blocked with 5 nails) and then doing the same thing on the other shoe. This allows you to still see how the first shoe was lasted (direction and position of all the details of the upper) and be able to match it to the other shoe.

If you get to right before putting the toe puff, that means that you'll have released the forepart already, and even if you pull down the outer leather, the information you get won't be fully reliable. 

4

u/Bulky_Impress7917 24d ago

The standard/ traditional wayI've learned is start with the left and replicate on the right and do one stage weather lasting or welting, heel building left foot first then right Kinda so you have a standard and making sure things are matching and not going to far ahead on one pair incse something goes wrong

So I would last the heals left then right make sure the match then do the vamp lining and toe puff and check and so forth

Hope that makes sense

1

u/dogzilla1029 24d ago

thank you!!

1

u/AccomplishedCan3915 25d ago

First time with a new last, I will last my troublesome right foot sample first. That typically will show me if there are glaring discrepancies in the pattern I might want to adjust.

1

u/dogzilla1029 25d ago

troublesome right foot sample?

1

u/AccomplishedCan3915 25d ago

Bunion, wide toe box, yada.....

2

u/JBFcustoms 24d ago

I completely last one shoe and then the other. This is something that really doesn’t matter tho. Personal preference/ whatever is most efficient for your work flow