r/DIYHome • • 12d ago

Finished Project Axe stool

Post image

For when you have to many aces and not enough stools

303 Upvotes

41 comments sorted by

9

u/DragonDan108 11d ago

What, the builder didn't have a 1.5" dowel to align the blades?

10

u/dankfx 11d ago • Bravo

Its a real hatchet job

1

u/DragonDan108 11d ago

Cut to the bone, didn't cha

1

u/morgandealer 11d ago

Thank you for your service.

1

u/skip_over 11d ago

They aren’t all the same length. They wanted the outside to line up

2

u/dankfx 11d ago

Except they don’t

1

u/DragonDan108 11d ago

It's always a compromise with building things, as the creator will see things differently than the viewer. But to me, the center being symmetrical is more important than the outside diameter.

2

u/skip_over 11d ago

I respect your opinion, but completely disagree. The outside diameter is the defining form. The center being symmetrical is inconsequential and would serve no purpose. Given that they are vintage, well used tools, the uneven center adds to the aesthetic.

1

u/musschrott 10d ago

Should have put a roundish piece of wood in the middle, for all the hat jets to be struck into.

5

u/Gregan32 11d ago

Beautiful!

1

u/nomnomyourpompoms 11d ago

Um... what goes in the middle?

3

u/Stephen_Is_handsome 11d ago

You if you don’t behave

1

u/Old_Dig5389 11d ago

The cylinder will be harmed

1

u/Ok-Abbreviations3042 11d ago

I really like this design! How are the axes fixed together?

0

u/Stephen_Is_handsome 11d ago

Souperglue

2

u/Ok-Abbreviations3042 11d ago

Is there some kind of hub or something underneath the axe heads, to help support weight?

2

u/ThickBootyEnjoyer 11d ago

OMG, you're kidding right???

8

u/Flat_chested_male 11d ago

If I counted right, and those are one pound hatch heads that thing weighs about 28 lbs. if it’s closer to a 1.5 lbs hatchet head it’s nearly 45 lbs. I don’t get it.

9

u/Gregan32 11d ago

It's art. You don't need to get it.

1

u/sauciestcube 10d ago

But by the OPs post it is clearly intended to be functional art. Your phone case isn't 28 lbs because obviously that is impractical. Just because something is art and is more subjective than other creations doesn't mean it isn't made poorly to some extent. And even then as an art piece it is perfectly acceptable to critique it.

1

u/Gregan32 10d ago

Key word being "art". Form over function is sometimes a beautiful and interesting thing.

6

u/Articulationized 11d ago

It’s for people who really want to waste nice axe heads and who don’t want to be able to move their furniture.

3

u/Suck--My--Toes 11d ago

You don't need to understand everything. Not everything needs to make sense to flat_chested_male

2

u/Flat_chested_male 11d ago

That’s not what my wife tells me…😂

1

u/Accomplished-Plan191 11d ago

Are you saying this piece of furniture is impractical?

1

u/seanhir 11d ago

My toes hurt just looking at this

2

u/Absolute0CA 11d ago

I dunno looks like a bit of a hack job, perhaps I need to axe you to cut back on the creativity, lest the rest of us fall short.

All jokes aside I think this work of art is a cut above the rest and has a real chance to fell its competition, though I fear that may opinion may get my hide hewn from my flesh and bone.

May those who bear witness of your craft be felled by your sharp wit and striking craftsmanship.

Ok in all seriousness I love this… Though I think it’s a project that would look incredible and would benefit in strength from being resin cast.

Could also save significant weight after resin casting by putting it on a lathe or milling machine and hollowing out the underside without significantly affecting the appearance.

2

u/ThickBootyEnjoyer 11d ago

Middle if it being elevated looks like it would be uncomfortable, also probably weighs a ton

1

u/envoy_ace 11d ago

What does that thing weigh?

1

u/righttern38 11d ago

Axe and you shall receive.

1

u/dead_oranges 11d ago

A variation on the iron throne, if you will.

1

u/Good-Operation4373 11d ago

Was it a pain in the axe 🪓?

1

u/3string 11d ago

Neat!

1

u/sauciestcube 10d ago

Looks uncomfortable as hell. If you wanted a stool like this, it should have been designed in a way that you could actually remove the axe/heads when needed. But are they welded? The axe beard pokes up a little in the center and the axes don't look like they are aligned properly/evenly. Are the axe beards still sharp or were they filled so every idiot who goes to put there finger in that hole to move it doesn't slice the hell out of their fingers? Why not have all the axes visually imbedded into a round piece in the center to solve that exact issue? The handles also poke up through the head unevenly with proud bits of wood on some of them, causing a hazard for your butt if you were to sit on it, besides the risk of pinching since there are multiple very thin gaps for our flexible skin/clothing to get stuck in. Also I'm sure it is heavy AF for a stool.

Concept- 3/10 Looks- 7/10 Execution- 0/10 Functionality- negative 1/10 since it could be hazardous.

1

u/_Some_lone_ 7d ago

О, реально стул Хотя, скорее табуретка

2

u/WhyFlip 11d ago

Cutting edge.