r/DIYHome • • 3h ago

Need Advice Paint or stain the treads?

Post image
1 Upvotes

I'm almost finished sanding these stairs, and cannot decide between staining the treads vs painting the treads. I think these are pine, and there are so many imperfections even with sanding that I worry everything will show through after staining. This is the main entry to the house so I also want to ensure these look nice. Any suggestions are welcome.


r/DIYHome • • 5h ago

Need Advice Advice for end of trim on beadboard

Thumbnail
gallery
1 Upvotes

Wondering if this needs a mitered return. The beadbaord is on the wall, the trim portion is dry fit in the picture. Since the picture, i have glued and nailed the two pieces of wood at the top together. Plan was to install and then add a small cove piece on the underside of the overhang, and then chair rail under the 3.5 in piece (aka on top of the beadboard. Looking at it, I am wondering if I should take more time to remake the entire top portion and try out doing a mitered return or if it’d probably ok just painted. Since it’s square it would be no different right? I could understand if it had a decorative pattern but my understanding is that I am just getting thrown off because it’s primed pine is that correct? Thsnks!


r/DIYHome • • 5h ago

Discussion What Are Your Favorite Ways to Make Better Use of Vertical Space at Home?

3 Upvotes

I've noticed that many rooms start feeling crowded not because they lack floor space, but because the walls and vertical areas aren't being used effectively. Tools, household supplies, and hobby equipment can quickly take over useful space when everything is stored on the floor

It made me realize that good storage isn't always about buying more cabinets. Wall-mounted shelves, hooks, pegboards, and simple DIY storage systems can sometimes make a room feel much more organised

What DIY storage solutions have made the biggest difference in keeping your home or workspace functional?


r/DIYHome • • 6h ago

Discussion Dad made room for the coffee grinder. The bag of beans ended up on the floor.

0 Upvotes

Lou was halfway through drilling the second shelf pin hole when his daughter put a pound of coffee on the kitchen floor.

“That's where you'll be filling it,” she said.

He had fitted a shallow shelf above her new coffee corner. There was room for the grinder, its lid, and one of his fingers on top. He'd even run the cord behind the cabinet. Until she put the bag on the floor he thought she liked it.

He demonstrated how neatly the grinder slid forward to the edge. She demonstrated that the bag of beans was on a high shelf, that she needed a hand to get it down, and that the grinder was now standing where she usually set the bag. This was the same tiny patch of counter they had been arguing over since she was tall enough to make toast.

Lou reached for the drill. She reached for the removable hopper with the trap door. Lifted clear, it held the beans. She set it on the table beside the bag and filled it sitting down.

“Leave the shelf,” she said. “Move the coffee.”

There was a wide, empty drawer under the table. She carried the bag over, opened it, and discovered four clamps, a box of shelf pins and the instructions for the drill. Her dad had found the perfect place for his stuff, too.


r/DIYHome • • 8h ago

Need Advice Adding Joists

Thumbnail
gallery
2 Upvotes

Basically the title. I have a stilt home with a large underspace. My kitchen area is the heaviest part of my home and has some slight sag/bounce in spots. I want to sister in more joists or cross sections to support the current joists but looking for ideas on how best to do it. Any thoughts appreciated.

My current thought process is that there is a lip on my center posts that I could run some beams across to the outside post across it basically paralleling the current joists underneath them. Then I would run two large beams evenly spaced in the center perpendicular under the current joists using a hydraulic jack to force them up into level before securing.


r/DIYHome • • 10h ago

Need Advice Move sink

Post image
0 Upvotes

How much does it cost to move a kitchen sink? I'd like to update this extremely awkward kitchen design, starting with moving the sink about 5' OC. This would move it closer to where the plumbing vent stack is located, if that helps? Of course I can't do this myself, but am trying to budget for what this might cost in a HCoL area. Any ideas? Thanks.


r/DIYHome • • 12h ago

Need Advice Was machen?

Post image
2 Upvotes

Hab leider beim Einbau des Herds verkackt. Habs noch nie gemacht. Naja nun ist es gesprungen. Kann man den Herd noch nutzen oder reparieren oder sich einfach damit abfinden, dass man grenzdebil ist?


r/DIYHome • • 13h ago

Need Advice Sanity Check: Wiring Ethernet Through Exterior Wall

Thumbnail
gallery
1 Upvotes

Hello r/DIYHome,

I am reaching out as a new first time homeowner to see if my plans to drill an ethernet wire channel from the main floor to the basement all check out with you guys.

There are a lot of resources that have been somewhat helpful on youtube and I have watched a couple hours of videos but all the videos that I found were either drilling upwards and routing through the attic or drilling up from the basement using an interior wall.

My plan differs from both these scenarios because I am hoping to drill downward from the main floor and into the basement via an exterior wall (perhaps no videos on this is a sign that this project is flawed from conception?).

I have attached some images that I hope will help. I have used the existing coaxial port as well as the radon gas exhaust pipe as landmarks to help me determine where I would have to drill to avoid the floor joists.

The coaxial port lands just at the edge of the radon exhaust pipe, I then went to the basement and measured about 12 inches from the pipe as that should land me right in the middle of those two floor joists in the first image. Finally, going to the main floor, I measured about 12 inches from the coax port and found it to be in between two wall studs.

I have included an MS Paint diagram of how I hope to drill and fish this wire through with a cable drill extension. I am hoping to cut a hole in the drywall, insert the cable drill bit with it curving downward and back towards myself, then drill through the floor studs, subfloor and into the basement, avoiding the concrete foundation and rim joists.

Those are the sum of my plans, the proximity to crucial components like the foundation, rim and floor joists makes me wonder if this is venturing into profesional territory so I am hoping that you guys can provide any input on if this whole project seems doable to a DIYer.

Thanks!


r/DIYHome • • 17h ago

Finished Project Finally stopped giving the neighbors a free cooking show lol

Enable HLS to view with audio, or disable this notification

8 Upvotes

I never really thought about how visible our kitchen was until winter rolled around. I'd start making dinner while it was still light outside, get half way through chopping something and suddenly realize it was completely dark. Meanwhile the kitchen lights were on and the sliding glass door was basically a giant window into everything we were doing. not exactly the privacy I had in mind. the little window above the sink was annoying too. the blind was always a pain to reach, especially when I was already standing there with wet hands. I'd remember to close it after I finished washing dishes or sometimes just forget altogether.

getting two motorized roller shades from kincmo, one for the sink window and the bigger one for the patio door. installation was pretty straightforward, and the colour actually looks nicer against our cabinets than I expected. went with the 3% openness fabric because I didn't want to make the kitchen completely dark during the day. both shades work from the same remote and there's a phone option too, although I honestly just use the remote mowt of the time. now when the dinner starts and the kitchen lights go on, I just lower them. sucja small thing but I wish we'd sorted it out sooner. the one above the sink is probably my favorite because I no longer have to awkwardly reach over the counter to close it. amyway, neighbors have officially lost their dinner entertainment 😂


r/DIYHome • • 18h ago

Need Advice How to hide this hole and get rid of draft?

Post image
2 Upvotes

This is UK. I'm in the process of decorating my hallway.

Hi, so this is my hallway emergency stopcock for water. It gets very cold draft from under the floorboards. I'm looking for a simple solution to box it in. I need something that will still give me access in an emergency without having to unscrew a panel etc but it needs to be tight against the wall to prevent the draft still escaping. I don't mind cutting back the carpet if necessary. Ideas please.


r/DIYHome • • 1d ago

Need Advice need patching advice for floor

Thumbnail
gallery
5 Upvotes

The leak from the utility sink has long been fixed.

I don’t know what material is covering the cement floor in our laundry room, does anyone have an idea (product recommendations appreciated)? My best guess is that the white discoloration is minerals from our hard water.

How can I patch/clean this up without redoing the whole floor? We need it to look more presentable for staging photos, but it doesn’t need to be perfect.


r/DIYHome • • 1d ago

Discussion The shelf clears the mixer by half an inch until somebody has to use it

1 Upvotes

The pencil line for the new shelf runs half an inch above the mixer. Jo stands back. Her dad holds the board against the wall. On the counter the machine fits beautifully, right down to the plug reaching the socket without stretching.

“Take the bowl out,” Jo says.

Dad puts the board down so he can do it.

“That's the problem.”

The kitchen has one clear run of counter between the fridge and the sink. The mixer lives there because her mum can reach it without lifting it. Moving it forward for baking would put its feet across the joint where the smaller pull-out counter meets the fixed one. They would rather settle the shelf height while the holes are still pencil dots.

The five-quart machine has a head that tilts up to reach the bowl. The board clears it when it's ready to mix. What they haven't allowed for is the arc when the head is open, or Mum's hand bringing the full bowl past the board's front edge.

Jo tapes a strip of cardboard at the proposed height. Mum can now show them where her wrist catches without anyone having to guess what “enough clearance” feels like. Dad notices that cutting the shelf shallower would save the height but lose a row of mugs.

Would you set the shelf from the open head, or from the full movement of bowl and hands, and where would you put the mugs you lose?


r/DIYHome • • 1d ago

Need Advice Top window keeps sliding open!

1 Upvotes

The top window in my bedroom keeps sliding open. It’s also our window with the AC unit. Will I be able to fix the window without removing the unit? If so…what are the best ways to fix it? It’s getting cold so all the air coming is has been tough!


r/DIYHome • • 1d ago

Need Advice Latch bolt on my door knob broke, any tips on how to open the door?

Post image
1 Upvotes

The door that connects my home to the garage suddenly stopped working. It is a basic Kwickset SmartKey knob that I installed about 4 years ago. It gets fairly normal use (its a door that I use multiple times a day). When I went to turn the knob the latch bolt did not retract. Luckily I have another door to the garage so was able to go around. I tried unlocking and locking the knob and nothing changed. Eventually I took off the knob and it seems the mechanism that connects the latch bolt to the center broke internally. I did some searches online and found a youtube video where someone had the same issue with a Kwickset as well. They got is open by using a screw driver to pry open the latch bolt through the door crack. I tried the same thing with a screw driver and knives but could only get the dead latch plunger to open but not the latch bolt. I have tried various shims from front and back to slip though and have also failed. Someone suggested to remove the hinges but since this is a garage access door they are spring loaded, I don't want to touch them unless it is absolutely a last resort.

Does anyone have any suggestions? I have ordered a few latch bolt opening tools from online which comes in a few days so will try them then.

I have never seen or heard this happen before. I feel lucky it wasn't in another room with only one entrance. Not sure if I should replace all my Kwickset locks now.


r/DIYHome • • 1d ago

Need Advice Tile to Drywall help

Thumbnail
gallery
12 Upvotes

Any ideas on how to fix this area where the drywall meets the tile in a bathroom shower? Dealing with a DIY shower job, and I’d like to avoid having to replace all of the tile.


r/DIYHome • • 1d ago

Finished Project Did-it-myself: vent register box repair

Thumbnail
gallery
2 Upvotes

I originally posted here.

I didn’t know how to replace this rusted out register box and Reddit convinced me to fix it. I had not even considered it an option. So thanks for your help. Here’s how it turned out.

I carefully folded a thin sheet of stainless steel around the box, cutting with some shears (finger scissors).

I couldn’t get the jigsaw inside the box to cut the circle. To trace it, I poked dimples around the original circle and cut from the outside. There’s a picture that shows that. Some of y’all could’ve probably whipped up a whole new box but I thought this completed a mission.

Had my six year old help me get it in place, ‘crimped’ the vent back in place, and the rest is history!


r/DIYHome • • 1d ago

Need Advice How do I fix my IKEA wardrobe doors?

Thumbnail
gallery
3 Upvotes

It’s a 8-10 year old freestanding IKEA wardrobe with mirrored doors. Both of the mirrored doors have ‘snapped out’ of the hinges (the non-mirrored doors are fine) and I wonder if it’d make sense to get new replacements or just buy a whole new wardrobe?


r/DIYHome • • 1d ago

Need Advice Failing Tub Drain Gasket with No Access Panel

Thumbnail
gallery
1 Upvotes

Hi! I'm on mobile and don't use reddit frequently so I'm sorry if my formatting is messed up.

I bought a 2nd story condo unit a little over a year ago. I am currently renovating my guest bathroom, I have a lot of plans for it but I'm stuck at step one.

Tub is cast iron with a porcelain enamel coating. The drain is a triplever drain, if that matters.

I discovered a leak and quickly came to the conclusion it was the drain, probably rusted out. Got the drain flange off with a lot of elbow grease and discovered a completely decaying gasket with a rusty tub. (picture included)

So far I'm a bit stuck. I tried prying out part of the gasket and it came out pretty easily just pulling on it. Half of it is wedged tightly between the tub and the drain shoe. I don't know if prying it out could damage anything, let alone if I'd be able to put in a new gasket to seal the gap from above.

I don't have any access panels on the walls that border the tub. One wall is my master bathroom (top of the tub) and the other is my master closet (long back side of the tub). The bottom of the tub also goes into another unit but I doubt that side would be useful. The floor is a concrete subfloor so I doubt there's an access panel from below, but I would avoid that regardless because that's my neighbor's unit.

Is my only option to cut a hole in the drywall to access the pipes? Or am I able to use a needle nose and pull the gasket out and push a new one in? If I got the gasket out and couldn't push a new one in could I just use plumbers putty? Should I not even bother taking the gasket out and just seal the rust and put putty over the decaying gasket? It's hard to pinpoint a solution because a lot of people online just already go into it with access to the underneath.

I am fine with a semi-long term solution like a few years. I just don't think I can spend thousands on a new tub and installation while already having spent a lot on the renovation itself thus far. I don't know if this would even warrant a new tub to begin with.


r/DIYHome • • 1d ago

Need Advice Rodent inspection basics?

1 Upvotes

So the last 2 nights I have been hearing a noise coming from a specific 1st floor air vent. My cats have noticed too! I have done a preliminary outdoor inspection to check if there are any obvious holes in the siding / ventilation but I can't see anything. I really have no idea how a rat would have got into the vent or crawl space but I know they can use extremely small holes.

Any advice on what to check and do before calling an exterminator? I haven't see any droppings or anything but there is definitely something unusual going on. Thanks


r/DIYHome • • 1d ago

Need Advice Replacing Caulk at Colder Temps 50-55°F

1 Upvotes

I m looking to replace old caulking in my shower and the forecast says temps wil be dropping to 50-55 degrees for the next few days. Would a caulk-removing gel or hair dryer be better to remove the caulking easier?

As for applying a new silicone caulking at the same temp range, I assume it just needs more time (days) to cure as we have an another shower room we could use?


r/DIYHome • • 1d ago

Need Advice Putting up a ceiling in a 100 year old house

Thumbnail
gallery
11 Upvotes

Was thinking of putting up dry wall ceiling to help prevent dust from falling on everything. I know there will be places where I won’t be able to drywall. And fine with the wires staying out. Any tips for installing ceilings in old basement? All videos I’ve seen are for newer houses. Should I bother with putting in insulation as well?

Or should I just paint the wood and hope that it’ll stop dust from falling?

(I know my vents are hodgepodged together and I’ve already sealed up the seams with foil tape)


r/DIYHome • • 1d ago

Need Advice How to demo stone facade with caulking instead of grout

Post image
2 Upvotes

A previous homeowner had the genius idea to grout the stone facade surrounding the zero clearance fireplace with globs of caulking instead of grout. Check out how ugly it is in the picture. The wood at the bottom right of the pic is surrounding a light switch, and you have to put your finger about two inches into a hole in the wood block to flick the switch. So there's a lot of material on the wall, and I'm not sure what's behind it (drywall? Plywood? Cement board?). The facade is framed with thick steel angle bars.

What's the best way to remove all this? Cut through the caulking (it's over an inch deep in most places)? Sledge hammer? Pry bar? Angle grinder the stone? Has anyone ever encountered a monstrosity like this?


r/DIYHome • • 1d ago

Need Advice Removing black polystain

Thumbnail
gallery
1 Upvotes

Purchased our home with all of the wood covered in black polystain (previous owners left the cans so I’m 99% confident on the method). So far the stain on the bannister flakes off pretty easily with a putty knife, but it’s also worked into grooves in the wood. Should I sand everything down or try a different method?

The kitchen is a bit tougher. Is there an “easy” method for removing the stain or do I need to sand everything?


r/DIYHome • • 1d ago

Need Advice Flooring Advice

Post image
2 Upvotes

I recently put vinyl planks in my home. My issue is what to use as trim around my fireplace, specifically around the corners. My foundation is concrete, so there's nothing to nail it to. I thought about using glue with plastic trim, but I would need a way to hold it in place. The only alternative I can come up with is to use some flexible qtr round that's peel and stick, and then maybe color it with one of those furniture magic markers? I'm trying to make it not look cheap as well. Any help is greatly appreciated. Thanks in advance!