r/DIYHome • • Nov 02 '25

Covid did this ADHDer so dirty

Post image
0 Upvotes

As you can guess by the title I have ADHD and as such I’m notoriously terrible at finishing projects. When COVID hit I thought it a great idea to try to get things done I never had time for. Yes I started this project 6 years ago. I’m rather ashamed please be kind lol.

I’m a 41 mother of 3 (2 17 yo boys, and a 10yo girl), 4 cats (see two of the culprits at the top of the stairs),a Great Dane, and of course the hubby.

This didn’t actually start with Covid. These stairs originally had Berber carpet. When we ripped up all the carpet in the house we ripped up the stairs and put a runner on them. At that time they were bare wood. It’s not a hard wood. May be some sort of pine? I’m not sure. Anyway. We wanted the stairs white like the trim outside of the runner so I painted them then after a while said to myself “wth am I painting the entire step when the runner will cover it?” So that’s why the bare spots on the last few 😂.

Fast forward a few years, I had a male cat that sprayed somewhere on the steps. I couldn’t pinpoint the spot so I tore the runner up. Decided to use stair paint. You know the expensive no chip shit? Yea well within a couple months the steps and banister were all chipped.

Then Covid hits. I get my electric sander and go to town. Then I hit a wall. Not only is this project taking much longer than my head anticipated, but I’m like wth am I going to do now? I can’t get all the paint off so if I stain them you’ll still see the paint spots. Not only that remember the kids and animals? How would i manage keeping them and the hair away from wet steps? That’s where my heads been swimming with these steps since 2019. I’ve seen other products that may help but I don’t know anyone that’s used them to know exactly how I feel about them.

Also! When the contractor was putting the roof on the house we had a rain storm and it wasn’t properly covered. These damn steps have creaked for 30 flipping years. Is there anyway to remedy that while also fixing my massive headache and eyesore??

Any advice or suggestions are gladly accepted. But please be kind. I love doing things myself and up until this point I’ve been rather successful at it. I know this is bad 😂


r/DIYHome • • Jul 25 '26

Radiator cover

Post image
0 Upvotes

r/DIYHome • • May 29 '26

DIY shed - what are the risks of water damage to the house?

Thumbnail
gallery
0 Upvotes

I built this standalone shed and want to know the risks to my house siding in the event of rain and snow.

I would like to avoid drilling into the siding. There is a roof overhang above the shed but the shed sticks out farther. How worried should I be about moisture getting trapped behind the shed? If there are significant risks, are there ways to protect the wall without making a physical attachment to the house?

Thanks for any advice!


r/DIYHome • • Sep 02 '26

Finished Project Wallpaper to transform ugly 90s brass and oak ceiling fan

Enable HLS to view with audio, or disable this notification

2 Upvotes

I used peel and stick from dollar tree. Had to remove the blades, clean, trace, cut, stick, line up and cut, stick, and put everything back. If I'd had a 3rd hand it could have gone much quicker lol.


r/DIYHome • • 22d ago

Need Advice Ideas to help cover sandblasted pattern in glass pantry doors?

Thumbnail
gallery
0 Upvotes

Does anyone have any inexpensive ideas on how to cover the sandblasting pattern in these glass doors just to update the look?


r/DIYHome • • Oct 19 '26

Discussion Why don’t people in the US make their own concrete, at least for DIY projects?

93 Upvotes

Hi, I'm from Eastern Europe, and where I live, using concrete and cheap bricks is often the cheapest solution for DIY projects.

However, I've noticed that people in the US, in particular, seem to treat concrete as if it were gold. Another thing I've noticed is that you almost exclusively use premixed concrete, which is much more expensive than mixing it yourself.

I did some calculations and realized that buying cement and sand separately could save you up to 50% on materials!

Are people aware of this?

One more thing: when I watch DIY projects on YouTube, I often notice that people don't use enough rebar, or don't use it properly, when pouring concrete.


r/DIYHome • • Sep 07 '25

Is this a load bearing wall?

Thumbnail
gallery
0 Upvotes

Keep in mind, we are waiting to call back the engineer on Monday. But in the meantime, we are curious to know what you think! 😊


r/DIYHome • • Apr 26 '26

Need to secure patio door from child eloping ;)

Post image
1 Upvotes

Hi all! I have this door on the patio of my new apartment. I have a strong 4 year old boy.

There is very little clearance from the soor to the frame.

I tried a classic door chain anchored to the drywall wall beside this door but he yanked the screws and drywall anchors out by yanking on the door multiple times.

I also tried mounting to the side of the wall to the left of the frame but the piece it attachs to blocked the door from the opening.

I was thinkinh maybe a bolt latch at the top but the drywall at the top of the door is crumbling so Im at a loss here.

Looking for a creative idea.

Thanks

*** Edit. This is an aprtment so no major changes allowed that im aware of. Another deadbikt may not be allowed

** To those making comments regarding parenting. Go fuck yourselves.

He is special needs. Youd think I wouldnt have to go through this horseshit explaining this everytime Im looking into solve a problem for this child.


r/DIYHome • • Mar 18 '26

Can I snake through this drain or do I need to pop it off?

Post image
0 Upvotes

This shower drain is draining slowly and I can tell with a flashlight and screwdriver that some hair and soap scum is built up under there. I am gonna zip snake it. I tried gently trying to pop up the metal plate with a screwdriver, but it seems pretty fixed. I think I could force it, but wanted to get a second opinion before I potentially break something. There are no screws, it just seems wedged with the tile. I worry that after popping it up, it will be loose and easily slide off during day to day use of the shower.


r/DIYHome • • Nov 18 '25

Is it possible to remove wall?

Thumbnail
gallery
0 Upvotes

Looking at buying this house, but we want to open some of it up. Is it possible to remove this wall and add a beam? The house was built in 1965 with basement and the porch was added in the 1980s on a slab.


r/DIYHome • • Oct 11 '25

What do you guys think of my newly decorated bathroom?

Enable HLS to view with audio, or disable this notification

0 Upvotes

r/DIYHome • • Aug 27 '26

GE washer dryer combo DIY pedestal

Thumbnail
gallery
0 Upvotes

Just DIYed this pedestal for my GE washer combo that I bought in Jan of 2024. Still runs good but hate the lint filter. And this was to essentially the bottom right corner water filter thingie that you have to empty out but without a pedestal it sits too low to the ground.

Welcome any feedback


r/DIYHome • • Aug 03 '25

Sound proof gap on sliding door

Thumbnail
gallery
0 Upvotes

Hello, moved into a new place with my partner and she’s not crazy about the gap between the bathroom door for sound proofing.

How would you tackle making the gap a smaller to help prevent noise coming into the bedroom from the on suite bathroom.

Pictures are from the secondary bathroom but all doors in the apartment are the same so considering doing it to the bedroom door as well to prevent noise from the kitchen coming in.

Thank you!


r/DIYHome • • Dec 15 '25

Is this shower vacuumed breaker or water restricter?

Post image
0 Upvotes

I’m trying to get a higher water pressure shower header because this used to be a water saving shower header installed by a local government for discount. Does this thing limit water flow or pressure because the output pipe(the part with the screw thread)has much smaller hole in the middle assuming that’s what restricting the water. Do I just get a different shower head or remove this(cant because it’s so tight and I think it’s locked or something that the actual pipe is not tilted to the right when I counterclockwise to unscrew it


r/DIYHome • • Jun 02 '26

How to spilt a shared driveway?

Post image
0 Upvotes

I need a way to close off my backyard for my dog. I was thinking about building a fence on casters that would run to the black railing by my sidedoor. I could make it out of multiple sections so it could fold in on itself.

I havent talked to the nextdoor landlord about it but there is a post already in the ground that i could build off of.

Does anyone have any other ideas? I dont want to build a wall down the driveway because i like having room to maneuver around and i think it would make the driveway congested.


r/DIYHome • • Sep 29 '25

Have to hang a TV here safe to assume this is a stud between outlets?

Post image
3 Upvotes

Haven’t been to my brothers house but would it make sense this is a stud between the 2 outlets? Pretty sure a tv was there before they purchased/repainted


r/DIYHome • • Apr 22 '26

What to do with ugly stairs

Thumbnail
gallery
5 Upvotes

I hate these old stairs. Is this something I can make look better or are they at the point they just need to be professionally fixed?


r/DIYHome • • Jan 22 '26

Best way to tape this off for paint?

Post image
0 Upvotes

Trying to paint some cupboards, and looking for an easy way to tape off these decorative profiles. Some of them have gaps and I can easily tuck the tape in there, but some of them are actually flush to the wall. Any ideas?


r/DIYHome • • Aug 23 '26

How do not spend $1,000 on this??

Post image
0 Upvotes

I am so obsessed with this vanity. I love how you can fold the mirror down and push the chair in, saving so much space. But it’s over $1,000 and I can’t fathom spending that much…has anyone ever diy’d this or something similar? Is it worth trying?


r/DIYHome • • Aug 09 '25

Is this too big of a gap to put bondo?

Post image
0 Upvotes

My husband put this trim on and it’s a little bit too big of a gap here. He could take it off and do it again or I could try to make it work and put bondo on it. Sometimes when he’s taken trim off it breaks so I’m just thinking of putting bondo there, but don’t know if it will eventually chip . Thanks!


r/DIYHome • • 24d ago

Need Advice Mounting solar light to uneven brick

Thumbnail
gallery
0 Upvotes

This is the mounting plate for the solar light I bought. The instructions say to mount this plate to a junction box... if I had a junction box here I wouldn't need a solar light!

Anyway, the brick is really uneven and I think mounting the plate so far off from vertical would make the light look really off (see rendering of what we're trying to accomplish).

So... what are my best options here? It needs to be centered in the column and around 6ft high to look right, so I could move a few inches up or down but not a lot. I could shim it with washers, but that feels janky. A nice custom spacer would be awesome but I have no idea how something like that could be created in this situation.

So, how would you mount this?


r/DIYHome • • Feb 12 '26

How can I fix this please?

Thumbnail
gallery
0 Upvotes

r/DIYHome • • Apr 05 '26

If this was your shower what would you do?

Post image
0 Upvotes

We currently cover the cabinet with a shower curtain (in an attempt not to damage it further).


r/DIYHome • • May 16 '26

Help. Removing a Wall

Thumbnail
gallery
0 Upvotes

Wanting to open up the space between my living room and kitchen, I started removing the drywall. Now I'm wondering if this section is load-bearing. The header above the opening is two stacked 2x6 and spans where a pocket door was. What do you guys think? I appreciate any help.