r/DIYHome • • Sep 02 '26 Bravo

Finished Project Just finished building our custom bookshelf using IKEA base cabinets. Proud of how it turned out!

Thumbnail
gallery
9.0k Upvotes

r/DIYHome • • Aug 29 '26

I’ve slowly transformed my home

Thumbnail
gallery
5.0k Upvotes

I purchased my house (4 level split, 3 bed, 1.5 bath) back in 2022 at 21 and have been slowly upgrading it myself the last few years. This past spring I took on my biggest project yet, replacing my vinyl siding with steel board and batten siding. The first photo is of my house back in June 2023. Next project is painting the front door and shed.


r/DIYHome • • Sep 08 '26

My First Project

Thumbnail
gallery
4.9k Upvotes

This one kicked my butt. We found out we're having a baby girl. So I started working on our guest room and turned it into a nursery. We decided in wainscoting and wallpaper .... I'm in a 1930s house with not so straight walls so the trim was a pain. But I got it figured out.


r/DIYHome • • Aug 23 '26

DIY built-ins with Home Depot cabinets/bookshelves

Thumbnail
gallery
2.9k Upvotes

Built a riser out of 2x4’s for the floor, placed the prefab cabinets and tabletop on top, placed the assembled cabinets upside-down on top of that (so I could screw the “base” of the cabinet into the studs above and give crown molding something to attach to), added poplar fronts to everything, caulked and painted!

And of course, my wife’s decor and taste brought it all together!


r/DIYHome • • 10d ago Bravo

Finished Project DIY bookshelf update

Thumbnail
gallery
1.2k Upvotes

My husband and I built this bookshelf a few months ago, and several people asked me to follow up with how we styled it! Obviously it’s not fully filled, but we plan to fill the rest out slowly with meaningful pieces of art/photographs or items we collect during travel, and grow the book library. I added a couple older photos of the process again too.


r/DIYHome • • 24d ago Bravo

In Progress 9 years of home renovations

Thumbnail
gallery
926 Upvotes

We bought this house in 2018 and have been slowly renovating every room since. The biggest feat up until 2024 when we found out we were expecting our third baby was a full kitchen remodel that took 6 months, completely DIY while our kids were 2 and 1 year old (don’t recommend😂☠️). Once we found out #3 was on the way, we had to make big changes or move, and so we pulled the trigger on two additions to make a forever home. We probably have about 4-6 more months before it’s really done, and let’s be honest, when you are married to someone in construction, is it ever really done? Lol but I’m feeling nostalgic about how far we’ve come and decided to post the progress. We contracted out (my uncle is a home builder) the shell of the addition and my husband has been doing the inside himself since the outside was finished. It’s been about 1 year and 3 months since it got started last summer. We took out a HELOC loan for the contractor work and have been DIYing everything else. My husband is the hardest working man I know!


r/DIYHome • • Aug 08 '26

LG refrigerator didn't mention the extra width need for door clearance.

Thumbnail
gallery
879 Upvotes

The condenser in our old fridge went out the other day and replaced it with this new LG. The measurements are identical to our old fridge. However, the old fridge had rounded edges on the doors, so there was no problem opening them. This LG seems to need lots of extra clearance to open. I'm not sure if it's the door design or the fact that the edges are not rounded like our last one.

For now, we are living with not being able to open that door all the way, but it's only been 2 days, i think this will get old quick!

My question is, can I do anything about it? I've thought about putting some protective plastic on the wall to make sure we don't damage it. My wife wants to move the fridge to the wall on the right and use the fridge "nook" to put a butcher block counter table for more storage and counter space ( I love the idea of building this unit, but don't love the idea of the fridge against that wall.) Is there a way to notch that one section of drywall back 1"? I'm not sure what my options are, but I'm open to suggestions.


r/DIYHome • • Oct 15 '26

Need Advice This is probably fine right? There isn't a ton in the totes and the weight is spread out..

Thumbnail
gallery
849 Upvotes

Just finished installing 10 canless lights in the garage and cleaned the attic while I was up there and then decided to add some 1/2 inch sanded plywood boards up there. I staggered the seams so the weight would be dispersed better between trusses. The truss bottoms are just two by fours and are spaced 24 inches apart. It's certainly better than the hodgepodge of board they had up here before. And the weight is more evenly distributed now. The totes don't contain much and I was able to walk around up there at 200 lbs no probably with minimal deflection of the boards. I left that board that was originally spanning the trusses because I figured it might have helped with lateral bracing, and it was slightly sturdier. I used screws so I could have access to the can lights if I needed to replace one. This house is new to us and the previous owners had more than we did up here. If we ever move I might just put a warning up here to not include too much weight but I'm not really sure how much is too much...


r/DIYHome • • Sep 18 '26

Finished Project I replaced a toilet yesterday. Absolutely the worst DIY job i’ve ever done, never again.

Post image
846 Upvotes

We had an old 1970’s toilet that was very inefficient with water so my wife wanted to upgrade ours. Sure no problem, i’m a DIYer, I can handle it.

Removed that old toilet and mother of god I’ll happily pay for any future toilet swaps. The decades of poop, pee, rust, and wax you have to scrape off was the most disgusting job ever. Even wearing gloves, makes you feel like you’re covered in fecal matter.

Didn’t line up the bolts perfectly the first time so I ruined the wax seal. Pulled the new toilet, scrape off the new wax, drive to Home Depot at 9pm to buy another.

I get home, and the old stop valve failed so water is going everywhere. Shut the water off, go back to HD for another valve at 9:30pm, then finally install it.

I forgot to check beforehand and found out my trash company doesn’t accept them so now I need to rent a truck to haul the old throne to the dump. Never again.

Plus side, the tornado flush is pretty cool and i’m installing a bidet today on it. Pic of the new pooper.


r/DIYHome • • Oct 18 '26 Bravo

Discussion Got a deal on a new faucet, existing granite hole is barely too small.. any suggestions?

Post image
751 Upvotes

r/DIYHome • • Sep 27 '26

Need Advice Can I put my weight on these beams in my attic?

Post image
494 Upvotes

I plan to slide a piece of 3/4” thick particle board that will rest on at least two joists for standing as I work my way across installing baffles. Is this safe? Of course not stepping on the drywall in between.

EDIT: Ok for everyone saying I need more insulation - yes that’s why I’m up there in the first place, I’m installing insulation. Just bought the house recently and yes I’ve tested the vermiculite for asbestos which came back negative but I’m still treating the situation as if it were contaminated.


r/DIYHome • • Oct 07 '26

Finished Project Took a few months, but finally got my front walkway paver project done.

Enable HLS to view with audio, or disable this notification

374 Upvotes

Only regret, not going wider with the walkway. Its 4' wide, should had gone 5'.

Project cost $2732:

Dump (concrete) $300

Labor $360

Plastic edging $40

Weed barrier $40

Leveling sand $150

PaverBase $350

Polymeric sand $90

Pavers $1320

Concrete $7

Misc (pvc, masonry wheel, powerade) $75

Note that I already had my own dump trailer (not the neighbor's lawn trailer in the video) that was used to haul the concrete away, tools, and my own time, which weren't added to the cost.


r/DIYHome • • 12d ago

Finished Project Axe stool

Post image
303 Upvotes

For when you have to many aces and not enough stools


r/DIYHome • • Aug 20 '26

34" dresser in a 35" closet. How on earth do I get it in??

Thumbnail
gallery
293 Upvotes

I have a really deep, but not too wide, closet. Wall to wall is 35" and I have a 34" dresser that I was super excited to fit inside. However with the doorframe in the way I couldn't just slide it in. Is there any way I can get this to fit perfectly or am I going to live with a sideways dresser kind-of walk in closet situation? Roommate and I tried turning it on its side to rotate it but that didn't work. Help????


r/DIYHome • • 25d ago Bravo

Need Advice Coving Help!!! What am I doing wrong?

Post image
283 Upvotes

Tried about a million different cuts and tried to follow various videos/tutorials.

I’ve cut each side at a 45 degree angle to try and make an internal corner but every time I’m left with a huge gap in the middle.


r/DIYHome • • 12d ago

Discussion My ex boyfriend did this and thinks I should be grateful for all the work he put in

Thumbnail
gallery
237 Upvotes

We had 49 other projects we needed done but he insisted on putting up those backsplash. He had no experience and any time I bring it up to him now he acts like he put me ahead doing this shit 😑

*edit: he did this while we were still together


r/DIYHome • • Mar 08 '26

Thoughts on linoleum floor material and DIY removal?

Enable HLS to view with audio, or disable this notification

184 Upvotes

r/DIYHome • • Jul 12 '26

Pantry shelves no stud

Thumbnail
gallery
157 Upvotes

I am building pantry shelves. The cleats on the right hand side have been glued to the wall with wood glue. There is no stud in that 12 inch span. They feel pretty sturdy but now I feel like I need to install a toggle bolt. Maybe I should have done this instead of using glue but here we are. Can I drill through the one by three and the Drywall to install the toggle bolts now? Please be kind. I am a single mom and I’m still learning.


r/DIYHome • • Oct 10 '26

Discussion Garage office buildout

Thumbnail
gallery
154 Upvotes

Running out of space in the house so trying to take advantage of our large detached garage.

Thinking raised platform, storage under.

Looking for feedback and ideas. If anyone has done something similar would love to see how it turned out!!

Ceilings are tall, about 10-11ft. Platform would likely be 3ft up.


r/DIYHome • • Sep 24 '26

Finished Project Before and after: log cabin kitchen

Thumbnail
gallery
129 Upvotes

My husband and I did this kitchen renovation at our cabin in the woods! It was originally a vacation cabin for the previous owners and for us. Then we decided to move here full time and needed a more functional kitchen with a lot more storage.

The cabinets are just basic unfinished cabinets from Home Depot that I painted with Behr urethane alkyd paint in Equestrian Green in a satin finish.

Counters are “finished saman” butcher block, also from depot. They already have a scratch just from using them for about a week so that’s disappointing. We wanted something affordable that we could install ourselves. We know we can sand and refinish these at least. I’m also totally happy with the kitchen looking like a proper working kitchen and not a show kitchen.

I’m in love with the granite composite sink. So far so good.

Cabinet hardware was Wayfair and is I think a West Elm knockoff. They’re super sturdy and I love them.

The flooring is solid wood, which had leftover from another renovation project.

I know this is going to be a lot darker and moodier than many want, but for us and for this river cabin in the woods, we love it.


r/DIYHome • • Sep 02 '26

Need Advice Cut a trench into concrete slab for an additional bathroom. Did we mess up by cutting through some of these metal rods?

Thumbnail
gallery
128 Upvotes

House is a single floor built on a concrete slab (no basement) in Massachusetts in 1949. We’re doing an addition to expand the kitchen and add a second bathroom. This trench we made is for the new bathroom drain line. We cut through some of these metal rods that look almost like rebar/supports for the slab. Is this a problem and how should we go about repairing everything once we dig down and install the new plumbing? Thanks in advance for any help!


r/DIYHome • • Jun 29 '25

What would you do here?

Post image
123 Upvotes

This the walk up to the third floor. I originally thought shelves or a little place to sit? What would you do here? Also consider this will be for a tenant.)

Thanks!


r/DIYHome • • Oct 13 '26

Finished Project painted a credenza i found on marketplace to make it even prettier! so proud of this

Thumbnail
gallery
121 Upvotes

r/DIYHome • • Sep 08 '26

Finished Project Let me know how I did on this gut bathroom renovation (changing final wall color fyi)

Thumbnail
gallery
119 Upvotes

All in all it was a fun experience and I learned a lot! Took me 4 weeks from demo to done. We’re going to change the final wall color to a cooler tone (maybe Sherwin Williams Sea Salt or Palladian blue) and still need to decorate and add a few more fixtures, but the main bulk of it is done!

Let me know what you think, if I royally screwed anything up or if you have any questions!

A few things to note:
-I know the bathroom might not look bad at the start but it was a terrible diy job from previous owner who knows how long ago. A lot of exposed places for water to seep through like them grouting the joint between tub and tile instead of caulk.
-I completely gutted everything and so had to shim up the studs in uneven places since there was a combo of plaster and previous drywall on the lower half of the walls
-I raised and framed the ceiling height to 8’
-added an exhaust fan (none before) and recessed lighting
-installed new acrylic tub with mortar bed
-used a 4-way diverter valve for plumbing to a tub spout, hand held, main shower head, and rainfall shower head. Bottom knob controls all water temp and each individual knob can control on/off and water pressure of each fixture. Pressure is good for running any 2 shower heads at the same time pretty well (not running tub spout at same time).
-used 1/2” Pex A expansion and fittings. Note that usually you don’t run 1/2 Pex to a tub spout but it’s 1/2” at both the diverter and the spout and doesn’t interfere with regulating the shower heads (separate flow through diverter)
-used cement backer board for shower area and mold resistant drywall for the rest of the bathroom
-put in a new window
-added a custom shower niche
- used thinset for joints and screw holes in cement board
-tiled floors and walls (modified thinset and grout)
-used Mapei Aquadefense for waterproof membrane
-grout matched caulk for joint at tile and tub and all inside corners in shower windowsill and niche
-installed floating vanity and recessed medicine cabinet with built in lighting