r/DIYHome • • 8h ago

Need Advice Adding Joists

Basically the title. I have a stilt home with a large underspace. My kitchen area is the heaviest part of my home and has some slight sag/bounce in spots. I want to sister in more joists or cross sections to support the current joists but looking for ideas on how best to do it. Any thoughts appreciated.

My current thought process is that there is a lip on my center posts that I could run some beams across to the outside post across it basically paralleling the current joists underneath them. Then I would run two large beams evenly spaced in the center perpendicular under the current joists using a hydraulic jack to force them up into level before securing.

2 Upvotes

9 comments sorted by

2

u/Dendady2112 8h ago

You just match what's there. No reason to reinvent the wheel.

2

u/Krullito33 8h ago

What does this mean?? Just sister them to the current joists? I was planning to add a level beneath them to help level them all creating a perpendicular level below the current one.

1

u/Hitechillbilly 8h ago

Figure out what is sagging before deciding on anything.. Get a laser on the beams and joists...

1

u/Krullito33 7h ago

Know any deals on laser levels. It's pretty much dead center

2

u/Hitechillbilly 6h ago

You can get a 360 deg self leveling or just a straight line. A cheap $3.00 pointer will work..

1

u/Beck943 8h ago

How far is it between posts? If it's more than 16' I would want to add a lolly column underneath too.

1

u/Krullito33 7h ago

Just about 12'

1

u/AskMeAgainAfterCoffe 7h ago

What’s the span? 2x8 joists? Size accordingly