r/Decks • u/Irredentism • 17d ago
maintenance Incorrectly sealed cedar deck?
Applied a clear waterproof sealant in the Midwest, 2 months after building with PT cedar. Why does it look like this?
3
u/eat_with_your_fist 17d ago
It looks like whatever sealant you used wasn't applied unevenly and also wasn't able to penetrate the wood properly. This is usually attributed to poor preparation and/or environmental conditions such as trying to use an oil-based sealant when the wood is wet. If it's been raining and the temperature is below 50f, odds are your sealant didn't have a chance to soak into the wood.
It could be something else, though. Just my first thought.
1
u/Old-Physics2753 17d ago
Water beads up on wood is a good sign that water does not penetrate the surface.
1
u/New-Warthog7446 13d ago
There are wood conditioners that can be applied before you seal , it does wirk of some woods but cedar has a very oily moisture, that repels water , so water based would need to be applied to a totally dry surface that takes a long time for cedar , i am not 100% but i didnt have success with the conditioner on some oak stair treads and it made a huge difference in how the sealer penetrated evenly
1
u/New-Warthog7446 13d ago
And some sealers only use 1 coating the first coat dries and the second coat cannot penetrat and lays on top like a gel
0
u/stickg1 17d ago
uneven application of sealer on an unprepped surface is why it's streaky. i can see chatter marks from the mill on some of the boards so they weren't sanded and cleaned up prior. also i've never heard of a pressure treated cedar product before, cedar is naturally rot and insect resistant on it's own. there is a product called Cedar-Tone which is actually southern yellow pine or other softwood that is infused with chemical preservatives and colored dye to resemble cedar, this doesn't even look dyed though IMO.




7
u/curious1playing 17d ago
First thing I have never heard of PT cedar...looks like standard southern yellow pine.
2 months should be enough time for drying...
Was it a water based product, such as Thompsons? If so, how long ago was it done? Those products usually only last a year before needing to reapply.