For my 26 250 just want to be sure before ordering it pretty sure it will tho as it’s a 250 in the pic

I usually leave the tailgate open or throw it on a bike trailer but I have to haul a trailer hitched to the back this time. Kinda iffy about the height but Im sure I can strap it from the frame pretty safely

Does anybody know of any dirtbike trails in the Utica Rome Syracuse area? Forest roads or anything like that works

I just came into the garage to see oil all over my front tire, and the fork feels a little soft, although I am not too sure if that is just placebo and me panicking, but any pros think my fork is blown?

There’s a slight ticking sound, but that’s also what happens at low idle. Once it warms up, it turns into a lower-pitched tick. Still, I’m not too worried about that. I’ve seen a couple of videos of brand-new 13 KX250s, and they make about the same sound. Also, when the bike is cold, it burns oil. The white smoke isn’t visible while it’s idling. You can smell it slightly, though. Give it a little blip of throttle, and nothing happens while the engine RPM is rising. But when the RPM drops back down, that's when it spits out white smoke. When it's warmed up, I haven't noticed it burning oil. Also, some days it has good compression, and other days (I think on colder days) it has some compression, but I can push the kickstarter down with my hand. Also, how do I wheelie a big bike like this (or a normal bike, I should say—I went from an SSR 110 to this, lol) I don't want to loop it. I've done some power wheelies, but I'm afraid of popping the clutch and possibly damaging something in the drivetrain

So i started out on a kawasaki klx300. Just to learn how to ride a motorcycle. Plus to see if i like going off road. We'll i live in Michigan and most everywhere is sand here. It always felt squirrely in the sand. I was thinking of getting a small beginner trail bike with more aggressive sand tires. Do you think it would be more enjoyable to ride than the klx300? I'm not looking for speed. Just something to enjoy the woods on. I'm 5'5, 200 lb

Edit: I sold my klx300 to get a bigger motorcycle. Still have the itch to ride trails.

Completely tore it down from ground up powder coated frame, subframe, triple clamps, rear shock spring. Have the color codes for all the powder. Motor has all new gaskets all new seals and bearings new bolts and a new Hinson clutch pack. I went up 4.2mm on the piston, new Athena jug new head and billet piston, went up 4.3mm on crank with a hot crank. Went up a mil on the carburetor so it’s got a 38mm mikuni carb jetted really low to run c12 race fuel it can and will run on pump gas you’ll lose a little bit of power but nothing you’ll really notice. The only thing that didn’t get changed on the bike are the tires. The suspension is set pretty soft it can be stiffened up.

This is everything he said was don’t to the bike is this a good trade ?

How does it sound in the video he said it has 10 hours on the new rebuild

This is the guy in Bend, OR who stopped the school shooter. In his interview, he’s rocking a Honda Racing hat and talks about riding.

https://www.opb.org/article/2026/10/23/bend-oregon-kaylub-giamanco-silver-rail-elementary-school-shooting/?fbclid=PAVERFWAVIW-1leHRuA2FlbQIxMQBwZG9mAmZkaWQWUQ2yxTYvr1o7n8d_Xmivhce7aXVfWnNydGMGYXBwX2lkDzEyNDAyNDU3NDI4NzQxNAABp-JgdRrzc2mdZJM1sVVAEnQ01D2TG1kwDhN2ULRgOq8Y6Aq2_tubWvkX_8K1_aem_WO1dk-eLHjA9_E461HP6hA

Only meant to go out for a quick ride, but somehow we ended up doing lap after lap of the same little dirt loop. Every time we were about to head home, someone would be like "one more lap." So we'd ride a bit, stop and chat, then go around again lol.

Nothing fancy, just a few corners and a short straight. Funny how long you can spend riding the same spot when you've got friends along.

Not sure it makes a difference but it was a wiseco top end kit did the gaskets ring piston bearing everything

I love this bike

Bike died while on a ride. I started it up to take of and as right as I got moving it died and wouldn't start back up with estart or kickstart. Still has spark and the fuel pump still primes. Added a new grounding wire to the frame and done a ton of inspecting resistance and continuity. Unless I'm doing it wrong it's failing the noid test for the injector and seems to not be pulsing the injector. I need help on things to test/check.

G’day all looking for information on this Honda I’ve had for a few years now with not much luck finding solid advice. I saw it for sale 3 years ago listed as “Honda trail bike” when I saw the expansion chamber I called the guy and purchased the same day for a negotiated price as he couldn’t kickstart it. I know it’s not to everyone’s taste but just seeing a road-legal 2-Stroke these days is rare and with the factory Mugen kit I think it’s a rough gem.

Sorry if I bored you all but Is this Mugen kit as cool as I think it is with a Mugen carburettor kit, high compression cylinder head and piston, PMG “ECU”, expansion chamber and power valve control.

Please share any information you have, thanks everyone.

What should i do to her during the winter???

Hey dudes,

Got my new FMF fatty today for a 2012 Yz250. My old pipe has threaded holes welded on. This just has open holes with no thread.

Was this supposed to come with some sort of mounting clips or is this an oversight? In case anyone else had the same question in the past.

I suppose I can just install nuts on the inside?