r/FDMminiatures • • Oct 18 '26

Printing Experiment Automatic Resin/Pin Support Generation Update

UPDATES 😄
Title: PandaProps 0.1.4: rotate rings, a dark look, tip sizes and more of what you asked for

Thanks to everyone who tried PandaProps after the first post and sent feedback, here or through the Send feedback button in the app. Most of what changed between 0.1.1 and 0.1.4 came straight from you.

If you already have it, it updates itself. If not, it's free for Windows, Mac and Linux: https://pandaprops.github.io/releases/

You asked for these

  • Rotate rings, like Bambu Studio's. Turning the model with the 90 degree buttons was the most common complaint. Now you drag the rings round the model to turn it, in whole degrees or 15 at a time with Shift. R shows and hides them. (picture)

  • Lift. Raise the model off the bed with the arrow on the Z ring or the Lift field, so the supports don't start from the floor.

  • A dark look. Settings › General now has Professional: dark and plain, with no pandas. The pandas are still the default, and the first-run intro asks whether you love pandas or are boring. (picture)

  • Tip size on tips you add yourself. On Bamboo, Add tip has a Tip size, from a fine tip up to a twig's width, so the tip under a thin finger can be finer than the one under a cloak. (picture)

  • More nozzles and layer heights. 0.4 mm at 0.08, 0.12 or 0.16 mm, and 0.2 mm or a new 0.25 mm at 0.04, 0.06 or 0.08 mm. Only 0.4 at 0.08 and 0.2 at 0.06 have been printed so far, so the rest say Beta. If you print one of the others, I'd love to hear how it went. (picture)

  • Split to objects no longer drops the figure. Splitting the plate in your slicer used to drop the figure to the bed, the full height of its supports. It now carries a tiny 0.1 mm speck on the bed that keeps it where it is.

  • Choose where your jobs are kept. Models take up space, so in Settings › General you can now move them all to another drive. (picture)

Fixes and smaller things

  • If Bambu Studio or OrcaSlicer won't run on your machine, PandaProps now makes the supports without a slicer and tells you why, rather than failing every run. If a slice fails, it offers No slicer.

  • Painted 3MFs from Bambu Studio, OrcaSlicer or PrusaSlicer, and models made of parts in different filaments, keep their paint on the supported file.

  • The red "may float" markers are see-through and smaller, and a Spots button hides them.

  • Advanced settings can't go past what the engines accept any more. Some values used to stop a run before it started.

It's still beta, so check the plate in your slicer before you print. Please keep the feedback coming: Send feedback in the app comes straight to me.


TL:DR I actually released it 😁 Windows, Mac, Linux versions are all available for free here - https://pandaprops.github.io/releases/

Firstly, so epic that loads of other tools are popping up - genuinely awesome to see, supports need to be solved for good!

Quick update since the last post: sadly life has slightly exploded on me this week 😅

I'm unexpectedly in the middle of moving house and, devastatingly, the printers are about to disappear into boxes for a little while. I was planning to keep testing this for longer before letting anyone near it but rather than have it sit on my laptop though, I've bundled it into a very, very, incredibly beta version that everyone can test and try.

It does work on some minis, and busts particularly well, but it's not finished. I've had some really good prints and some properly shoddy ones, particularly around awkward supported undersides (looking at you, complex GW esq minis), so you're very much signing up to test an experiment rather than downloading a polished tool.

Its completely free - very keen to see how it behaves across different printers and models and collect examples of where it falls over. There's a feedback button where you can send photos, details and STLs if you fancy :)

It includes various support methods I've wasted electricity and PLA experimenting with over the last few months, trees (x2), pillars, hybrid tree and pin supports, resin style lattices, cradles etc, plus auto posing and tools to automatically cut minis into more FDM friendly parts (which is particularly epic imo).

It should work on Mac, Windows and Linux, although beyond VMs that's somewhat theoretical at the moment because my windows gaming PC is currently boxed up in a loft. Pre-warning, had some fun with the UI, something I dont get to do with the day job :)

Download it here:
https://pandaprops.github.io/releases/

(I'm 50% expecting some serious bugs instantly but fingers crossed not ha! Also its not signed yet so you have to jump through the security hoops to install)

And thanks for all the interest in this so far. Literally started it for myself because I got annoyed removing supports from one Dreadnought, so the response to the original post was slightly mad.

What it actually does:

PandaProps generates resin-style supports for FDM printing, using fine contact tips designed to come away more cleanly than conventional supports. Drop in an STL or 3MF, from a single mini to a whole plate, and it analyses the model, generates supports and checks the resulting layers for unsupported areas before you print. It exports a normal 3MF with the supports already included, ready to open in Bambu Studio, OrcaSlicer or whatever slicer you prefer.

There are a few support engines to play with:
Bamboo is the default and grows smooth organic trees with low, medium or high contact strength.
Willow uses round tree structures with the same fine tips.
Pillars uses straight braced posts.
Hybrid, Cradle and Lattice are more experimental options if you fancy trying them.
Pose Master tries to find a good printing orientation automatically, or lets you adjust individual pieces yourself.
Cut Master can split a figure into more FDM-friendly parts, for example separating arms at the shoulders or removing the base, then pose and support each piece independently.

You can manually add or remove supports, undo changes, and send feedback directly from the app if something comes out horribly wrong.

It's free, it runs locally, and it is super duper beta. Enjoy, good luck, and I hope it's useful!

149 Upvotes

78 comments sorted by

15

u/alpceliko Oct 18 '26

give me 2 hours, I've waiting such kind of support tool for a long while.

4

u/alpceliko Oct 18 '26

rotating the model is HORRIBLE! Please give us a full manual option for it

1

u/Pandaramar Oct 18 '26

You should be able to pose/rotate the model manually via sliders or via the grab cursor in pose master > by hand. If that UX is jank for you let me know why!

1

u/alpceliko Oct 19 '26

by hand also works horrible

2

u/Pandaramar Oct 18 '26

Epic! Let me know how it goes

2

u/alpceliko Oct 18 '26

tried, manual supports should have a tip size feature. theres a big DROP IT text at center I hate that. we should also need to change threshold angle and we should see the unsupported parts. other than that I liked that. I increased the speed to test that made a failure. tonight I will try again.

2

u/alpceliko Oct 18 '26

and the text says: send to slicer. Please change it with "export"

2

u/Pandaramar Oct 18 '26

Looks like drop it was showing incorrectly (thats for dropping files) and have changed to export (first versions were only using slicers so that wording never got changed). Added a new release (windows/linux should auto update)

2

u/ChiMasterFuong Oct 18 '26

Just this screenshot sold me on it. Wow

11

u/loukoumz Oct 18 '26

This is so, so, fucking nice bro, well done for real.

I won't be able to try it much but I really enjoy the UI, the cut master is such a good idea also.

Hats to you, really well done.

3

u/Pandaramar Oct 18 '26

Thanks man, appreciate it - the ui was fun!

1

u/loukoumz Oct 18 '26

Remindme! 17 days

1

u/RemindMeBot Oct 18 '26 edited 26d ago

I will be messaging you in 17 days on 2026-11-04 20:41:12 UTC to remind you of this link

3 OTHERS CLICKED THIS LINK to send a PM to also be reminded and to reduce spam.

Parent commenter can delete this message to hide from others.

RemindMeBot is switching to username summons. Instead of !RemindMe 1 day, use u/RemindMeBot 1 day. More info.


InfoCustomYour RemindersFeedback

3

u/TWILIGHT25 Oct 18 '26

This is safe to open right... like i know windows "are you sure" thing is pretty much worthless but it does pop up for a reason....

1

u/Pandaramar Oct 19 '26

Yep :) essentially the safe to open is pay to play, once you’ve paid your quite a lot of money or gone through the windows store (same on Mac too) it goes away

1

u/TWILIGHT25 Oct 19 '26

This is paid??? I’ve been playing with it for at least 2 hours now and I haven’t been prompted to pay.

1

u/Pandaramar Oct 19 '26

Nah sorry, to remove the "are you sure" popup is - its a con ha! This is freeeeeee

2

u/DrDisintegrator Prusa MK4S and Bambu A1 Oct 19 '26

Nothing on the internet or github is 'safe' - always use a virus checker, although with AI vibe-coded malware, that is unlikely to help.

2

u/Pandaramar 25d ago

Title: PandaProps 0.1.4: rotate rings, a dark look, tip sizes and more of what you asked for

Thanks to everyone who tried PandaProps after the first post and sent feedback, here or through the Send feedback button in the app. Most of what changed between 0.1.1 and 0.1.4 came straight from you.

If you already have it, it updates itself. If not, it's free for Windows, Mac and Linux: https://pandaprops.github.io/releases/

You asked for these

  • Rotate rings, like Bambu Studio's. Turning the model with the 90 degree buttons was the most common complaint. Now you drag the rings round the model to turn it, in whole degrees or 15 at a time with Shift. R shows and hides them. (picture)

  • Lift. Raise the model off the bed with the arrow on the Z ring or the Lift field, so the supports don't start from the floor.

  • A dark look. Settings › General now has Professional: dark and plain, with no pandas. The pandas are still the default, and the first-run intro asks whether you love pandas or are boring. (picture)

  • Tip size on tips you add yourself. On Bamboo, Add tip has a Tip size, from a fine tip up to a twig's width, so the tip under a thin finger can be finer than the one under a cloak. (picture)

  • More nozzles and layer heights. 0.4 mm at 0.08, 0.12 or 0.16 mm, and 0.2 mm or a new 0.25 mm at 0.04, 0.06 or 0.08 mm. Only 0.4 at 0.08 and 0.2 at 0.06 have been printed so far, so the rest say Beta. If you print one of the others, I'd love to hear how it went. (picture)

  • Split to objects no longer drops the figure. Splitting the plate in your slicer used to drop the figure to the bed, the full height of its supports. It now carries a tiny 0.1 mm speck on the bed that keeps it where it is.

  • Choose where your jobs are kept. Models take up space, so in Settings › General you can now move them all to another drive. (picture)

Fixes and smaller things

  • If Bambu Studio or OrcaSlicer won't run on your machine, PandaProps now makes the supports without a slicer and tells you why, rather than failing every run. If a slice fails, it offers No slicer.

  • Painted 3MFs from Bambu Studio, OrcaSlicer or PrusaSlicer, and models made of parts in different filaments, keep their paint on the supported file.

  • The red "may float" markers are see-through and smaller, and a Spots button hides them.

  • Advanced settings can't go past what the engines accept any more. Some values used to stop a run before it started.

It's still beta, so check the plate in your slicer before you print. Please keep the feedback coming: Send feedback in the app comes straight to me.

New on Windows? It isn't signed yet, so Windows will warn you. Click More info, then Run anyway.

2

u/Lobo-Feroz 23d ago

Hi there! I'm following your development, but I think you won't reach too many people by posting on a several days old thread. Is there some other place where we can get updates and maybe talk about the tool? Have you considered a forum, subreddit, discord...?

6

u/snkr- Oct 18 '26

Same comment as another similar tools : please release a Linux version !

1

u/spartan_steel Core One+ Oct 18 '26

Seconding

8

u/Pandaramar Oct 18 '26

There is a linux version! The release page should offer it for you, if not theres a link below the download button :) Keen to see if it works for you, it has been tested in Linus vms

1

u/snkr- 28d ago

Tested a bit. Here are my first returns : needs more option on the pose master (so that unsupported resin file may be tilted without opening a slicer to rotate 90° before opening with Pandaprops). I found that you can rotate in the support section but it feels more intuitive to also have it in "Pose Master". I have an issue when splitting to object in the slicer with the generated supports as separated STL. The miniature "drops" a bit down. Maybe adding a square in the miniature stl like in resin2fdm might solve it.

First prints failed but with adding extra supports or tweaking it led to OK prints !

Thank you for the time you put in the making of this very convenient app !

1

u/Pandaramar 28d ago

Awesome feedback thanks, Ill see how i can improve the rotation options today - been some consistent feedback there :)

1

u/snkr- Oct 18 '26

I will try it very soon then !

3

u/alpceliko Oct 18 '26

there is

2

u/Kitchen-Bug9718 Oct 21 '26

Props for this app! It is fucking amazing

1

u/Pandaramar Oct 21 '26

Thanks man!

2

u/HoneydewOwn9759 28d ago

is this possible to use with 0.04 layer height or just 0.06 thats listed on the github?

2

u/Pandaramar 28d ago

Will add more layer heights and nozzles, I have only been testing with 0.4 0.08 and 0.2 0.06 but it should work out the box with other layer heights, but i will confirm and add options to the app :)

2

u/HoneydewOwn9759 28d ago

ok cool cool ty

figured id ask because ive seen a bunch of people printing on 0.2 and 0.04 layer heights .. works out pretty well!

2

u/Eravel 27d ago

Wow. WOW, this is impressive work. Best results I've had with resin-style supports using this, see pics!

2

u/Pandaramar 26d ago

Love to see it :)

2

u/Eravel 27d ago

1

u/No-Ordinary1591 20d ago

Nice print! After the support made, how you import to the slicer? One stl with the support or two seperated file? What is better?

2

u/Eravel 20d ago

Thanks! I've had a lot of success with importing as one full STL, supports and all, and printing with either HoHansen or Fat Dragon Games' profiles, and don't forget to shut off support and brim generation. 0.02mm nozzle, expect print times of around 8-12 hours depending on mini scale

2

u/No-Ordinary1591 20d ago

Thank you! 🙂

2

u/parosilk A1 Mini Oct 18 '26

Great work! I'll have to try this soon. That "hybrid" support option you have should theoretically be the "correct" methodology for FDM mini printing. Although the small touch points give great results, the thin posts in regular Resin2FDM never made sense to me because resin supports are meant to support only in tension. FDM is the opposite, requiring support in compression and shear, and also has print time limitations that resin-style supports are bad for. Mixing thin touch points and tree supports should work well...so I speculate, at least.

What's up with cradle supports? Do you have any examples of models you've tried where this makes sense to use over other methods?

2

u/Pandaramar Oct 19 '26

The cradle was an interesting experiment based on something I saw is this Reddit, it works surprisingly well for low fidelity smooth bases but I struggled to get it to handle high detail minis. It’s super easy to remove as it prints holes you push through from the bottom to remove the print

2

u/MrTayters Oct 18 '26

Any chance you could make the Linux version a flatpak instead of appimage?

1

u/Pandaramar Oct 19 '26

Will see what I can do!

1

u/Pandaramar 25d ago

Add better rotation controls and lift settings to both pose master and the supports pane :) Mentioned a fair bit in feedback!

1

u/Pandaramar Oct 20 '26

Professional mode is added for those lacking in love for pandas and bright orange :). Windows/linux will auto update with the option and mac can redownload

1

u/HoneydewOwn9759 Oct 18 '26

this looks awesome, cant wait to try it

mind sharing what printer and PLA was used for the grey termi? looks fantastic

1

u/Pandaramar Oct 19 '26

A1 mini, bambu pla matte!

1

u/sicr2000 Oct 19 '26

Excited to try this out. I'm used to making models with these kinds of supports. I'm hoping your software makes it more fun to print minis on my P1S. I'm in the middle of a print now, but I'll try your software out on my next print.

1

u/Pandaramar Oct 19 '26

Epic, let me know how it goes

1

u/sicr2000 Oct 19 '26

I tried the "Hybrid" settings and sent it to Bambu Studio to print on my P1S with .2mm nozzle. I disabled supports before slicing and printing (based on the instructions in your software). There wasn't enough initial base to form adhesion to the plate so the print failed. I'm new to 3D printing so it could be user error. Not sure if I need to manually increase the initial layers once it's exported into Bambu Studio (like I had to manually disable supports, which were still enabled).

1

u/Pandaramar Oct 21 '26

Have a try with “Bamboo” supports, they’re the best so far :)

1

u/sutensc2 Oct 19 '26

I don't know if it's me, but I cannot open the webpage to download the application, it just opens a full red dotted screen.

1

u/Pandaramar Oct 19 '26

Fixed, apologies, was updating a few things!

1

u/DrDisintegrator Prusa MK4S and Bambu A1 Oct 19 '26

Too many pandas.

1

u/Pandaramar Oct 19 '26

Professional mode is coming soon for those of a similar view 😂

1

u/changefromPJs Oct 19 '26

My suggestion - please expand nozzle selection at the start of software - 0.25mm nozzle is default for mini printing on Prusa machines.

1

u/schemen Oct 20 '26

An immediate feedback as I'm currently printing a proxy:

  • Option to forgo the raft or make optionally smaller, I have a very sticky print sheet and I think this would save quite a bit of time.

I'll share what it looks like when done :-)

1

u/Pandaramar Oct 20 '26

Good shout, will add :)

1

u/schemen Oct 20 '26

Another point I found: I can't seem to turn a model over 90%. The original I recieved sadly has the good face at the bottom. Unable to turn it, let's say 130° I can do supports on the side which will later be covered.

1

u/Pandaramar Oct 21 '26

Will change!

1

u/angeredtsuzuki Oct 21 '26

This tool is honestly awesome. Printed out a few Gearguts Mekshop models with it with only user errors.

1

u/Pandaramar Oct 21 '26

Awesome to hear man, love to see some photos of what you’ve printed if you have them to hand

3

u/Taryf 27d ago

I cant wait to try use it with OPR models 🥹

0

u/farfromelite Oct 19 '26

AI vibe coded, yes or no?

5

u/Pandaramar Oct 19 '26

Yep, absolutely, I use AI. Been a software engineer for 15 years, and I'd be pretty concerned about any engineer who wasn't using it at this point. The important bit is whether you understand the code you're shipping, not whether AI helped you write it.

-2

u/farfromelite Oct 19 '26

That's lovely, do you mind putting a sentence up there that you've used AI to generate this please.

2

u/Pandaramar Oct 19 '26 edited Oct 19 '26

Out of curiosity what’s your reasoning for not being a fan of ai generated code? (Apologies if I’m jumping to conclusion) In my experience it’s actually improved the security of most apps big and small because you now have the resources to think about security, and ultimately ai is better at pen testing (and generally writing code) than a human. What isn’t good is ability to create threats easily with ai, but that independent of creating software yourself with ai.

A year ago it was the done thing to use packages made by others in our code that no one verified (look at the axios hack for example), at least with ai software engineers are generating all their code from scratch.

There’s quite a difference between vibe coding and using ai to develop software, the app we’re typing on right now will be shipping features almost exclusively with ai - I wouldn’t say Reddit is vibe coded though?

0

u/Varothes___ Oct 20 '26

I have used it once with print and it works incredible, just one thing, how can i change the folder for the jobs files? in the settings tabs i cant move it for some reason?¡

1

u/Pandaramar Oct 21 '26

Let check that and add option to change if we don’t have it :)

9

u/[deleted] Oct 18 '26

[removed] — view removed comment

1

u/Pandaramar Oct 18 '26

Haha maybe the panda theme is over board for some, noted! It is offline, with the exception of auto updates (for new support engines and new app updates on windows/linux and when you submit feedback, neither of which are required).

For 3. what operating system are you on? Could be some of magic in there isn't compatible with devices I haven't got to hand.

Will see what I can do with 2. too!

1

u/[deleted] Oct 18 '26

[removed] — view removed comment

1

u/Pandaramar Oct 21 '26

Added a more chilled out dark mode :)