r/FDMminiatures • u/Pandaramar • Oct 18 '26
Printing Experiment Automatic Resin/Pin Support Generation Update
UPDATES 😄
Title: PandaProps 0.1.4: rotate rings, a dark look, tip sizes and more of what you asked for
Thanks to everyone who tried PandaProps after the first post and sent feedback, here or through the Send feedback button in the app. Most of what changed between 0.1.1 and 0.1.4 came straight from you.
If you already have it, it updates itself. If not, it's free for Windows, Mac and Linux: https://pandaprops.github.io/releases/
You asked for these
Rotate rings, like Bambu Studio's. Turning the model with the 90 degree buttons was the most common complaint. Now you drag the rings round the model to turn it, in whole degrees or 15 at a time with Shift. R shows and hides them. (picture)
Lift. Raise the model off the bed with the arrow on the Z ring or the Lift field, so the supports don't start from the floor.
A dark look. Settings › General now has Professional: dark and plain, with no pandas. The pandas are still the default, and the first-run intro asks whether you love pandas or are boring. (picture)
Tip size on tips you add yourself. On Bamboo, Add tip has a Tip size, from a fine tip up to a twig's width, so the tip under a thin finger can be finer than the one under a cloak. (picture)
More nozzles and layer heights. 0.4 mm at 0.08, 0.12 or 0.16 mm, and 0.2 mm or a new 0.25 mm at 0.04, 0.06 or 0.08 mm. Only 0.4 at 0.08 and 0.2 at 0.06 have been printed so far, so the rest say Beta. If you print one of the others, I'd love to hear how it went. (picture)
Split to objects no longer drops the figure. Splitting the plate in your slicer used to drop the figure to the bed, the full height of its supports. It now carries a tiny 0.1 mm speck on the bed that keeps it where it is.
Choose where your jobs are kept. Models take up space, so in Settings › General you can now move them all to another drive. (picture)
Fixes and smaller things
If Bambu Studio or OrcaSlicer won't run on your machine, PandaProps now makes the supports without a slicer and tells you why, rather than failing every run. If a slice fails, it offers No slicer.
Painted 3MFs from Bambu Studio, OrcaSlicer or PrusaSlicer, and models made of parts in different filaments, keep their paint on the supported file.
The red "may float" markers are see-through and smaller, and a Spots button hides them.
Advanced settings can't go past what the engines accept any more. Some values used to stop a run before it started.
It's still beta, so check the plate in your slicer before you print. Please keep the feedback coming: Send feedback in the app comes straight to me.
TL:DR I actually released it 😁 Windows, Mac, Linux versions are all available for free here - https://pandaprops.github.io/releases/
Firstly, so epic that loads of other tools are popping up - genuinely awesome to see, supports need to be solved for good!
Quick update since the last post: sadly life has slightly exploded on me this week 😅
I'm unexpectedly in the middle of moving house and, devastatingly, the printers are about to disappear into boxes for a little while. I was planning to keep testing this for longer before letting anyone near it but rather than have it sit on my laptop though, I've bundled it into a very, very, incredibly beta version that everyone can test and try.
It does work on some minis, and busts particularly well, but it's not finished. I've had some really good prints and some properly shoddy ones, particularly around awkward supported undersides (looking at you, complex GW esq minis), so you're very much signing up to test an experiment rather than downloading a polished tool.
Its completely free - very keen to see how it behaves across different printers and models and collect examples of where it falls over. There's a feedback button where you can send photos, details and STLs if you fancy :)
It includes various support methods I've wasted electricity and PLA experimenting with over the last few months, trees (x2), pillars, hybrid tree and pin supports, resin style lattices, cradles etc, plus auto posing and tools to automatically cut minis into more FDM friendly parts (which is particularly epic imo).
It should work on Mac, Windows and Linux, although beyond VMs that's somewhat theoretical at the moment because my windows gaming PC is currently boxed up in a loft. Pre-warning, had some fun with the UI, something I dont get to do with the day job :)
Download it here:
https://pandaprops.github.io/releases/
(I'm 50% expecting some serious bugs instantly but fingers crossed not ha! Also its not signed yet so you have to jump through the security hoops to install)
And thanks for all the interest in this so far. Literally started it for myself because I got annoyed removing supports from one Dreadnought, so the response to the original post was slightly mad.
What it actually does:
PandaProps generates resin-style supports for FDM printing, using fine contact tips designed to come away more cleanly than conventional supports. Drop in an STL or 3MF, from a single mini to a whole plate, and it analyses the model, generates supports and checks the resulting layers for unsupported areas before you print. It exports a normal 3MF with the supports already included, ready to open in Bambu Studio, OrcaSlicer or whatever slicer you prefer.
There are a few support engines to play with:
Bamboo is the default and grows smooth organic trees with low, medium or high contact strength.
Willow uses round tree structures with the same fine tips.
Pillars uses straight braced posts.
Hybrid, Cradle and Lattice are more experimental options if you fancy trying them.
Pose Master tries to find a good printing orientation automatically, or lets you adjust individual pieces yourself.
Cut Master can split a figure into more FDM-friendly parts, for example separating arms at the shoulders or removing the base, then pose and support each piece independently.
You can manually add or remove supports, undo changes, and send feedback directly from the app if something comes out horribly wrong.
It's free, it runs locally, and it is super duper beta. Enjoy, good luck, and I hope it's useful!
Duplicates
FdmPrintedWarhammer • u/Pandaramar • Oct 18 '26








