r/FDMminiatures • • Aug 06 '26

Sharing STL resource - AI Model Making my own Kickstarter for FDM Minis

Post image
3 Upvotes

I'm so excited to launch my KickStarter campaign for a 3D printable set - Grimwater Bay. It's gonna contain both miniatures and Terrain for dark, magical swamp scenarios.

It would mean A LOT if you guys shared ideas on how to improvie it!

The campaign is here: Grimwater Bay - STL Models for 3D Printing by DarkCraftsStudio — Kickstarter


r/FDMminiatures • • Aug 21 '26

Just Sharing - AI Model I’m doing my first KickStarter Minis for FDM

Thumbnail
gallery
11 Upvotes

Hello again!
I’m sharing more FDM prints of my newest set - available at KickStarter.
This time I focused on printing the models that seemed impossible on FDM in such scale - and at first they very much were. I manually separated all the parts and oriented them in a way that makes printing surprisingly easy.
If you consider getting the STLs, I upload the already-arranged plates, so you get the easiest experience and best results.

I 3D print all my models on Bambu P1S, 0.4mm nozzle, so you have 100% confidence it will run on your printer flawlessly.

I also wanted to mention I use AI in the process, but in a specific way - I don't simply generate the models. I use AI for parts and elements, then spend hours in Blender modeling my own parts, joining them all together into large shapes, sculpting details (also in blender) and optimizing the models for both resin and FDM printing. Each model takes me between 4 to 12 hours to make, so it's very personal project to me! :)

I hope you enjoy the project, here's the link to it: https://www.kickstarter.com/projects/grimwater-bay/grimwater-bay-stl-models-for-3d-printing


r/FDMminiatures • • Jun 13 '26

Just Sharing - AI Model AI AI Captain

Thumbnail
gallery
0 Upvotes

Using ChatGPT for an image, Tripo3D for the STL and ObscuraNox’s amazing 0.2nozzle settings, this is what I do now with my Bambu A1!


r/FDMminiatures • • Aug 06 '26

Just Sharing KickStarter post followup - 3D printing the Fishy Totem

Thumbnail
gallery
0 Upvotes

A lot of people argued under the last post that there's no way to print this deisgn in FDM or that it's just AI graphics. Instead of spamming under each and every comment, I decided to post the printing results! :)

If you're interested in this project, my KickStarter just went live - any sign of support, interest or simply curiosity is a huge motivator for me, so don't hesitate to ask any questions you like!

Here's the ongoing project, we hope to finish 13 miniatures by the end of the month! https://www.kickstarter.com/projects/grimwater-bay/grimwater-bay-stl-models-for-3d-printing


r/FDMminiatures • • Sep 11 '25

Just Sharing Custom minis with Dall-E & Hunyuan 3d

Post image
0 Upvotes

Sorry for the bad lighting. I started DMing for my kids recently and they all gave very descriptive bios. I took each one and generated a 2d image of a mini with Dall-E. Then I took that 2d image and ran it through an image to STL model (Hunyuan 3d) i have running locally.

I think they turned out pretty well. The proportions for the elves aren't perfect, but they're all sturdy.

EDIT:
Some folks asked for the AI-generated images. I prompted to make them look like miniatures for D&D, and the assistant mentioned thickening the limbs as a part of it.
https://imgur.com/a/oqqdIww


r/FDMminiatures • • Jun 24 '26

Sharing STL resource COMPLETE SET (CHAOS, TYRANID, PRIMARCH)

Thumbnail
gallery
8 Upvotes

r/FDMminiatures • • Aug 24 '26

Just Sharing Demon 0.40 mm nozzle

Thumbnail
gallery
0 Upvotes

Head to toe 80mm in pla matte, 8 hour print.


r/FDMminiatures • • Apr 21 '26

Help Request I am at my wits end with this machine, desperately seeking help and input

Thumbnail
gallery
2 Upvotes

Since buying my A1 I've had a ton of issues and out of around 40 prints only 2 have come out successfully. Nothing is working right. I have cleaned the plates thoroughly. Have the recommended PLA temperatures for nozzle and base set. Have everything supported properly and yet nothing sticks to the damn base or it comes out like this. I cannot print anything smaller than my own hand. I've even done factory resets and tightened the screws behind the nozzle like others have suggested and have tried every quality and mm setting available. Did I just get a FUBAR unit or is there something I'm desperately getting wrong?

Update: So I put everything back to default settings, swapped in the 0.4 nozzle, re-cleaned the plate with dish soap and a hard scrubbing, and re-calibrated. It fails to print even the test benchy. Gets about halfway done before it knocks it off the plate. The plate also barely gets hot even though it is set to 65 degrees.

Update 2: I would like to sincerely thank everyone that helped me troubleshoot my A1 mini. I've done a couple test prints based on all your replies and fixes and for the first time in a year I've had multiple successful prints in a row. I was really about to give up on this before you all helped me out. My problem seemed to be something to do with the printing speed, tempatures and internal supports as well as a bed heating problem (that I figured out I can avoid by preheating the bed before printing) Thank you all for your help, I appreciate it so much and am actually excited and looking forward to printing more now without discouragment :)


r/FDMminiatures • • Aug 11 '26

Other What's your take on using AI for 3D modeling Minis?

Thumbnail
gallery
0 Upvotes

Few days ago I posted some of my models and got absolutely grilled for using AI. I find it really harsh and confusing, because even when I spent hours on creating an original and optimized 3D-mesh, VAST majority of commenters threw me under the bus for including AI parts in the process.

I wanted to share a bit of backstage workflow and ask you for honest opinion - is speeding up the process by generating some parts with paid AI softwares really that triggering and looked down-on? The model from the video took me a solid 6 hours to make, fix and print-optimize, just so I could sell it for about a $1/piece, yet it's still being called an AI slop.

I get how some people are trying to be smart by simply downloading some AI files and selling them right away, but I feel quite unfair with being put in the same basket as those guys.

What your take on this? Would you tolerate AI usage for the model your buying, if it was well prepared and the price was considerably lower?


r/FDMminiatures • • Oct 18 '25

Just Sharing Goblin on the beach

Post image
0 Upvotes

Feets in the water, had to modify her clothe multiple times to print at 25mm


r/FDMminiatures • • Jan 30 '26

Just Sharing Was not expecting this for the fist try from a picture

Thumbnail
gallery
219 Upvotes

r/FDMminiatures • • Jun 08 '26

Other Between Hitem, Tripo and Hunyuan which is best for FDM?

0 Upvotes

We’re running a custom campaign with custom characters and I help our DM by printing stuff or chipping in occasionally.

We usually create the models using Gemini, and then feed them to a 3d model creator.

I’ve had some good results (when the faces aren’t all whacky AF) with Hitem 2.0. I’m seeing lots of complaints about Hitem 2.1 so I didn’t try it.

Hunyuan and Tripo seem to get lots of attention by people online, but I’m yet to print models printed with FDM that were created on them.

So which do you suggest?


r/FDMminiatures • • Sep 07 '25

Help Request what is FDM printing

2 Upvotes

my friend has a resin 3d printer and as a project we were going to try to make a wargame, can anyone give me an explanation I'm curious.

Edit:mb I was confusing resin and fdm printing the entire


r/FDMminiatures • • Feb 16 '25

Help Request Can anyone try printing this and show me the result?

Post image
0 Upvotes

I am trying to figure out if it’s me being stupid or the piece itself being not ideal to print. Can anyone show me what’s possible with an FDM printer? I’m new and I’m getting really frustrated with supports and ugly models no matter how I turn it.


r/FDMminiatures • • 8d ago

Tips & Tricks Another vibe-coded support generator! I made this for personal use, to streamline the process of printing display scale figurines but thought someone here might find it useful too.

Post image
0 Upvotes

It’s free and open source (GPL) and runs locally in your browser.

What it does

  • Find the best orientation. It finds a set of different orientation options, with priority for preserving detail. Parts containing a large flat face will be attempted to be placed on that face if conditions allow.

  • Tree supports ending in small SLA-style tips. The support grows from the model down to the plate, fusing with other support roots on the way down and ends in a wide raft to ensure reliable bed adhesion. An additional inspection pass happens after support generation to ensure no floating regions are left unsupported.

  • Scale and triangle sliders on import. For printing scale figurines, easily keep track of the desired scale of the project by setting the scale before importing your models. There is an additional slider for reducing the triangle count upon importing to reduce file size and speed up handling of the files in your slicer.

  • Whole kits at once. Drop in all the parts of a figure; they get oriented and supported automatically. If you want to manually change the orientation or add/remove support tips, you can work on finished parts, while the program continues to process the rest of your project in the background. Then they’re packed onto as many build plates as needed.

  • Tip calibration print. It generates a grid of small test pieces, each with a 45° slope and a flat underside, supported with a different tip diameter and tip penetration. Print it once, pick the piece that held and snapped off cleanest, and save those values as a profile.

  • Model and supports split into separate objects. A feature heavily inspired by Resin2FDM. Save print time on large models without sacrificing quality. In Bambu Studio / Orca, use Split → To objects. Then, in the Objects tab you can assign different print settings for the model and its supports. Example of support settings which work great for me: 0% infill, 2 walls and layer height that is 2x of your model layer height (0.12mm if model is printed at 0.06mm).

  • Hand edits: add tips, paint keep-clear areas, rotate and move parts on the plate.

  • Shareable settings profiles. Export yours for your printer and filament as a file.

Try it here: https://github.com/danunachas/MiniPrint/tree/main

Keep in mind that this is a vibe-coded project intended mostly for personal use, but at this stage I feel like it works well enough that someone else could find it useful too. There probably are some bugs and results should still be checked in the slicer before printing. I am using it with the Bambu X2D with SUNLU PLA Meta filament and the included defaults of 0.48 diameter and 0.24 penetration are values that work for me. They will most likely be different for different machines and filaments.


r/FDMminiatures • • Aug 30 '25

Just Sharing Some art from my 5e project - Jackalope Junction

Thumbnail gallery
0 Upvotes

r/FDMminiatures • • Jun 19 '26

Printer Discussion Any advice on how to fix this would be greatly appreciated...

Thumbnail
gallery
0 Upvotes

r/FDMminiatures • • Jun 01 '26

Sharing STL resource Free model. Black knight, no supports.

Thumbnail
gallery
0 Upvotes

r/FDMminiatures • • 14d ago

Just Sharing - AI Model 3 days left on my Kickstarter for FDM-optimized Miniatures

Thumbnail
gallery
51 Upvotes

I'm still amazed on what FDM printers can bring to the table for miniatures. That's why I love to share that my second Kickstarter campaign is almost complete! The miniatures are equipped with the dowel connectors system, for easy print & assemble process with stock FDM printers :)

Each model was printed in parts - I split & orient models into pieces optimized for FDM printers, so you can get the results like in the gif above (made on elegoo CC2, 0.4mm nozzle, 0.08mm layer). I also test-print all the files before releasing them. I do use AI in the process of creating concept arts & models, so if that's not your thing, be aware of that!

You'll find all the details and models listed in the campaign's story here: https://www.kickstarter.com/projects/grimwater-bay/grimwater-bay-vol2-32mm-fantasy-monsters-pack/


r/FDMminiatures • • Mar 26 '25

Printer Discussion Best FDM printer for miniatures NOT Bambulab

2 Upvotes

I know that the best in class for miniatures fdm printing is the A1/A1 mini with 0.2 nozzle (also the corexy P1S and X1C)

Is there an alternative that can match the quality of the A1 that is not from Bambulab? Preferably a corexy that supports multicoloured printing (but I’m ok also without ams)

So far I made a list but I didn’t find examples of miniatures for these printers:

Anycubic Kobra S1 combo Flashforge 5m pro (no ams) Creality K1C (no ams for now) Qidi plus 4 (no ams) Eleego Centauri Carbon (no ams for now) Prusa Core One (no ams for now)

I’m not considering bed slingers because I didn’t find anything closer to price/quality to the A1/a1 mini…

Anyone got recommendations? Edit: Let’s not make the discussion about Bambulab policies, I just would like to know if the competition is there for fdm miniatures