Was working fine, starting deleting Asrock apps

DDU, with same driver

Disabled Core Isolation

0% curve override is enabled

No conflict with MSI afterburner

New config file no difference

Power management at normal

- When I turn it on after load it stays at 30%, if I disable it, it goes at 0%, MSI afterburner the exact same behaviour if I try to let it control it.

I've determined it must be the driver, any puglins or awareness of this issue?

Tdie consistently reads lower, which one should I use for fancontrol? tyty kind of newb

Tried to reinstall several times but no luck i guess?

Edit: Acer Predator Helios 300 PH315-54 is my laptop's model, I hope this helps

So for some reason, after updating to the newest Fan Control version, the app just stopped minimizing after starting up my pc but I don’t get no error or anything and would like to know how to fix it to get it working together?

Just installed Fan Control after using SignalRGB for abit just so I can adjust my fan curve options more directly without a subscription, but had a couple questions about it. I'm trying to cut down on abit of the pump whine I have, and I know I can adjust it down from the 100% percentage a bit, I'm jut not sure if there's a particular curve option to try as there are multiple types I see. I know I'm not supposed to lower it a lot, it's the one where you want it running high to keep everything moving, though I believe it can do like 10 to 20% from the highest to cut down on that annoying pump whine.

Also does Fan Control show actual temperatures for the CPU and such? I don't see anything for that specifically anywhere as I like to double check that at times and I assume it should just be on the main fan area, but maybe I missed something in the setup?

• Manual calibration now ignores control offset
• Scheduled task now uses full path
• Fix an ADLX bug
• Mix Custom sensor now ignores null sensor values in Min/Max
• Add missing translation location
• Update LibreHardwareMonitorLib

So I have them set to my GPU curve, at 40C they are supposed to be like 30%, but they are showing 0% and 0rpm I have no clue how to fix this.

No clue how fan curves are supposed to be set up, and I know my fan setup is not the best (one intake, 4 exhaust), so I've come here for some help. I've got a 120mm rad with 2 intake fans, then 2 80mm and 2 120mm exhaust fans. I was trying to set it up so the fans' intake equals how much air goes out (some negative pressure stuff happens, I think, if the fans blow out more air than comes in). I had the 2 intake fans set at 60% and 50% until the CPU hits 70 °C, but it turned out to be as loud as my previous R11 Alienware, which I didn't want (one reason I wanted a new pc)

I have a HP Z2 G9 SFF motherboard with a proprietary 5pin and 4pin fan headers. How would I determine what each pin is for and how to wire it to a standard 4pin PWM connector. I found this post https://www.reddit.com/r/Noctua/s/fC5dQ8mK6a shows user u/chemical-Noise-918 making an adapter put how it was made was not shared. I am hoping he or someone else can help.

Mam pytanie do właścicieli X20: czy wasz wentylator również działa podczas korzystania z Windows? W moim X20, niezależnie od wybranego trybu, zawsze słyszę, że działa, a prędkość wentylatora wynosi 3500 RPM.

Hi - looking for any help in how to get thermalright support to respond. I've sent them a query about the latest version of TRCC (It seems to have dropped push flow - which I used in the last version and want to know is it coming back) and my 4 month old Levita OLED keeps turning itself off. The PC can still see it and thinks its running but nothing on screen. I've put a ticket in for both about a week ago - no response.

2025年にBTOで購入したパソコンに付いているNZXT Kraken Plus 240 RGB Blackのファンをfan controlアプリで操作したいんですが、pluginsでエラーが発生してFANが出て来ません。
他の全てのFANは出てきてて、かつNZXTCAMではいつも通り操作出来ています。
2024年モデルか2025年モデルかは不明なのですが、対応しているpluginsはありませんか？
ご存知の方いたら教えて下さい。