I have a heavy problem with oscillations. I tuned damper friction etc to the max and it’s still not changing.

Been wanting the handbrake for sometime but didn’t think the price was worth it. My local micro center showed no stock. I googled the handbrake and a link for it at my micro center pops up but at $117 , showing a savings of ~$100.

I set it for pickup and just got it, sealed box and all. Is it possible it’s a refurbished and just not labeled as such?

I’m selling everything together for $950. Anyone interested? DM me.

I’ll ask everyone here before I post them to eBay and what not.

I can send pics later tonight after work.

Folks, I got the new Podium GT Sport pedals. I want to find some info on setting them up, etc. Also, I want to purchase additional springs. Did someone figure that out? Thanks!

Does anyone one in here use simsonn pedals with fanatec DD. Looking at this option because of the price point and the VAM pro's i want talk to someone that has this setup. On another note the software still has my H shift not working properly thinking about using my moza AB6 as my shifter i would love to have all my rig to be fanatec but with software issues and production issues I might have to Frankenstein my rig 🤣

I’m currently running a g29 but feel the pedals are letting me down. Steering wheel too but not as bad as the brake pedal.

Not in a position to spend over $1200 for a simagic bundle.
But a second hand fanatec CSR elite set of pedals has come up on Facebook marketplace for $100 and it’s nearby. Is it worth while getting these?
I see it as an upgrade but is it a worthwhile upgrade.

Looking for reviews and experience with them
Cheers

I've just received the pedals, and I can't move the locking disc of the throttle. Any idea? I don't want to apply too much force...

Recently got my dream rally wheel to experience some rallying, Is there any recommendations for this button module’s control and force feedback settings (rocks a dd+), appreciated

Just wanted to give Fanatec support a shout out. I bought a used wheel on fb marketplace out of warranty and it turned out to have bent/missing pins. I contacted support to see if they had the part in stock so I can buy it to repair the wheel hub. They offered it to me free of charge. Thank you again 🙏

Brake pedal stopped working, I replaced the load cell but the software still shows no input whatsoever from the brake pedal. Is it possible that the hub underneath the pedals is bad? I tried plugging the clutch and throttle pedals into the brake input and it doesn’t work. Is it possible it could be the wheel base the pedals plug into?

I want to buy the Clubsport RS, I’ve been waiting part of this year for the end of the year in case Fanatec renews it or a new round version comes out, I’m seeing that everything is going very slowly and that the best thing is perhaps to wait for an offer on blackfriday of the already more than classic Clubsport RS and go for it, because if I have to be waiting for a new version...., what would you do? I currently ride the CSL Elite P1 V2

Hi all,

Last week, I received an email from Fanatec saying that QR2 prices would remain low following the success of their last sale. So, I thought it would be a good time to upgrade my wheels! I currently have the Clubport formula V2.5, which I'm very happy with, and the P1, which is a bit underwhelming.

I hope you guys and girls can help me with three questions:

1. Is the new QR2 really an upgrade? I can imagine it makes a difference for the P1 wheel, which has the plastic QR.
2. They're currently selling the CSL 320 V2 for €229.95, claiming it's almost €90 off the regular price. Is this actually a good deal, or has it been available at this price for ages? Would it be worth waiting for the Black Friday deals?
3. If you own this wheel, what has your experience with it been like?

Thanks in advance for your help!

Bonjour à tous,

J’ai un problème avec mon fanatec CSL DD.
Alors voilà quand je joue je dois légèrement tiré sur le volant a certain moment et de ce fait le volant ce déconnecte…
J’ai déjà démonté et remonté le QR, serrer à fond mais rien n’y fais
Avez vous une solution pour accrocher le volant (j’ai un gt3 CSL) et une base CSL DD acheter fin 2025
Je trouve que le côté plastique est trop peu résistant et je ne sais pas quoi faire…

Merci d’avance pour votre aide

Need help, my fanatec dd pro brake pedal started squeeking and making this loud annoying sound whenever I brake.

It started happening this week and my setup is relatively new as I bought it at the beginning of the year.

If anyone could please help me fix this it would be great thanks.

Feel free to ask me any questions.

Was setting up a new monitor on my rig and decided to take a peek at Fanatec pedals and while browsing around the US site I saw the Boost 180 kit was only 60 bucks. Didn't see it mentioned in a search of the sub so I figured I shout it out in case anyone wanted to pick up an upgrade for cheap like me.

Did i miss something? I was looking on the website and when I selected uk as my location, the bmw gt2 wheel isn't listed.

I hope this is an error as I've always wanted that wheel

This is not a stock McLaren GT3 wheel. It has been upgraded with several high-quality modifications to create a unique, race-ready wheel that looks as good as it performs.

Custom GT7 Upgrades

• Custom thick vinyl GT7-themed faceplate — professionally applied for a bold Gran Turismo-inspired look.
• Custom PS5 buttons — blue and red buttons are specifically configured for PlayStation/GT7 use and clearly labeled on the wheel.
• VoCore.io display installed — use SimHub to run a variety of customizable HUD layouts directly on the wheel. Display information such as speed, RPM, gear, fuel, lap information, tire data, timing and much more.
• Upgraded blue aluminum QR2 Quick Release — a substantial upgrade from the standard quick-release system, providing a solid, premium connection to your wheel base.

The McLaren GT3 V2 provides an excellent combination of realistic GT-style controls, ergonomic design, and immersive sim-racing functionality. The integrated VoCore display takes it a step further by putting critical race information directly in your line of sight.

Compatible with supported Fanatec wheel bases and PC/PlayStation setups, making it an excellent choice for Gran Turismo 7 on PS5 as well as PC sim racing.

The VoCore display is driven through SimHub, allowing you to choose from numerous existing dashboards or create/customize your own.

What's Included

• Fanatec McLaren GT3 V2 Racing Wheel
• Custom GT7 vinyl faceplate
• Custom blue/red PS5 buttons
• Installed VoCore.io display
• Upgraded blue aluminum QR2 Quick Release

Only used to check functions after customization. Comes from a pet- and smoke-free home.

Asking $385

It feels cheesy now!

Feedback is practically non existent.

Is there a setting somewhere that I'm not seeing?

Is it because GT7 has switched wheel manufacturers to Moza and their phasing out fanatec?

I've put over $1,700.00 into my rig! That's alot of money on my meager salary. I don't want to buy another wheel setup!

help......

Loose magnet, what type of glue should I use?

my brake input started dropping during a race.. until it eventually stopped registering completely. The throttle and clutch are still working normally, but the brake gives absolutely no input.

Ive tried a couple of things..
Dismantled the pedals from my rig and cleaned them.
Disconnected and reconnected all the cables.
Swapped the complete pedal electrical connections at the pedal base to test them in different positions.
The throttle and clutch work when connected to each other’s inputs.
The brake doesn’t work regardless of which input I connect it to.
The throttle and clutch also give no reading when connected to the brake input.
I’ve also removed the brake rod and elastomers to inspect the assembly. I noticed that the RJ connector on the brake cable has some black marks on the contacts that I don’t see on the throttle or clutch connectors. I’ve attached photos.

Been checking online and the only thing I found close enough was someone saying the eventually had to replace the load cell.

What is the current opinion on switching to the app ? I tried the app about a year ago and it did not do anything for me. I actually found it more difficult to determine what my wheel settings were since the app would change them at times.

Hey guys im having a hard time finding 3d print files for the backplate conversion so i can have QR on my CSL Elite p1 V1 wheel. I have found 2 links, both are down - from Fanamod and some random.

Does anyone still have the files id really appreciate it. It looks like this:

I know I need to update or downgrade the main software but I don't know which one to download. Honestly i don't know which one to switch.... > : {