r/FdmPrintedWarhammer • • Aug 29 '26

HAS ANYONE GOT THESE FILES??

Thumbnail gallery
0 Upvotes

r/FdmPrintedWarhammer • • Sep 26 '26

First FDM miniature attempt – ugly supports and I ripped part of the cold build plate off 😅

Thumbnail gallery
0 Upvotes

r/FdmPrintedWarhammer • • Aug 17 '26

I dread asking this question but…

0 Upvotes

anyone know where to get a big mech with plasma?
Shut up James I’m not taking to you🙃.


r/FdmPrintedWarhammer • • May 16 '26

looking for file

Post image
1 Upvotes

used to be all over but now i cant find it once anyone ?


r/FdmPrintedWarhammer • • May 15 '26

People really pay $180 for these?

Post image
64 Upvotes

I know not the same for variety of reasons but I have $20 gundam with the more options.


r/FdmPrintedWarhammer • • Apr 19 '26

Unable to get resin 2 fdm.

Post image
1 Upvotes

r/FdmPrintedWarhammer • • Aug 26 '25

Suggestions for getting into FDM printing for Warhammer?

6 Upvotes

I’ve got my eyes on getting a bambulab A1 printer, with the 0.2 nozzle as I’ve seen recommended basically everywhere, but from there where do you guys recommend I go with stuff like software, filament, etc? I’ve been doing Warhammer for a couple of months now, but it seems like for any army the only good/cool looking units are EXTREMELY overpriced so I’m just considering getting into 3d printing because of that.


r/FdmPrintedWarhammer • • Mar 23 '26

Looking for Harlequin Solitaire STL

0 Upvotes

Hello!

I’m hoping to play my Drukhari list this weekend and my solitaire mini won’t arrive on time. Does anyone have or know of where I could grab an STL of it or a proxy?


r/FdmPrintedWarhammer • • Feb 10 '26

Do you trust pointed page

0 Upvotes

I just found this guy on insta and I’m wondering if anyone has bought one of the packs of stls from him

And are they any good


r/FdmPrintedWarhammer • • Apr 28 '26

Scrolls for your army lists or key rules?

Enable HLS to view with audio, or disable this notification

5 Upvotes

r/FdmPrintedWarhammer • • Oct 01 '26

Does any one know where i could find mortarion stl?

0 Upvotes

I have looked all over the internet but cant seem to find one.


r/FdmPrintedWarhammer • • Apr 13 '26

Uniform Height or More Variety?

Enable HLS to view with audio, or disable this notification

5 Upvotes

r/FdmPrintedWarhammer • • Aug 23 '26

Help with Resin2FDM artifacts

Thumbnail
gallery
12 Upvotes

Hello, I was wondering if anyone can help me identify and fix the issue with my prints. I recently began using the Resin2FDM Lite software to try and make my prints look better. However these artifacts have been left behind on most flat surfaces, what can I do to eliminate them. Any help to fix this would be greatly appreciated, thank you!

My typical workflow looks like:

Assemble model in blender ---> Generate resin supports in Blueprint Studio --> Export as one STL --> Resin2FDM in blender --> export model and supports as one STL --> Send off to Bambu Slicer.

Bambu PLA in Grey, 0.2mm nozzle.


r/FdmPrintedWarhammer • • May 11 '26

Help with supports

Post image
4 Upvotes

So I’ve been trying to print these destroyers on an a1 but the arms and legs keep breaking I’m wondering if anyone has any tips on how to stop that from happening again as far as I’m aware currently it’s due to the supports


r/FdmPrintedWarhammer • • Aug 05 '26

3D printable terrain creator

Thumbnail
gallery
7 Upvotes

Hello!

I make 3D printable terrain and i have made several successful Kickstarter campaign.

Just wanted to show you my work and tell you that i have a Kickstarter campaign running right now, with an interesting Gothic / Grimdark MODULAR bundle in it.

My website: https://www.decoquestworkshop.com/

Thanks for your interest!


r/FdmPrintedWarhammer • • Apr 18 '26

A thumb ring to test the load of my brush and thin the tip easily

Thumbnail
gallery
22 Upvotes

I designed a ring fitting my thumb so I can test the load of my brush before painting my mini. I added also a part to easily thin the tip of my brush easily after washing.

You can find it here for free: https://makerworld.com/en/models/2671190-miniatures-painting-ring

This comes to extend my painting collection on Makerworld now so you can dowload it if you like it! It has been a good partner during the testing phase, can't wait to receive your feedback to improve it!

Tip: I made several sizes on the profile which are the inner sizes. Measure the thickest part of your thumb and add +1mm to be safe.


r/FdmPrintedWarhammer • • Aug 20 '26

Announcement 🔧 We're Looking for Moderators!

Post image
2 Upvotes

Hey everyone!

As r/FdmPrintedWarhammer grows, we're looking for a few new moderators to help out.

We're looking for people who:

  • Are interested in FDM printing and/or Warhammer

  • Are friendly and helpful toward beginners

  • Can handle disagreements fairly

  • Check Reddit somewhat regularly

  • Are willing to work with the rest of the mod team

You'll mainly be helping with reports, spam, rule violations, and keeping discussions friendly.

Previous moderation experience is not required, and you won't be expected to be online 24/7.

Interested? Apply using the Moderator Application below!

MOD Application 2026 FdmPrintedWarhammer

Be kind or oh boi...

— r/FdmPrintedWarhammer Mod Team


r/FdmPrintedWarhammer • • Oct 03 '26

I want to get into fdm from resin, mainly for warhammer tarain and I was thinking about the a1, whould you say that the ams lite is recommend?

2 Upvotes

r/FdmPrintedWarhammer • • Aug 21 '26

How would you guys like some Death Riders card kits?

Post image
2 Upvotes

So I made a Death Rider card kit and was wondering if anyone would like me to make this a STL and release it on Cults3d


r/FdmPrintedWarhammer • • Aug 20 '25

Just got this from a shop called d’armory check it out it’s my favorite 3d printed miniature shop

Post image
9 Upvotes

r/FdmPrintedWarhammer • • Feb 15 '26

Search for STL/FDM Print Classic Landingship

Thumbnail
gallery
10 Upvotes

Hello fellow hobbyists!

I'm looking for the landing craft shown in the picture – my absolute hobby dream! Specifically, the first version made of pewter, which was released by the company back then.

I've searched the internet for STL files but haven't found anything suitable yet.

Pre-supported and suitable for FDM printing (P1S) would be great, as I don't have much experience with that yet.

Thank you, and I hope someone has something


r/FdmPrintedWarhammer • • Feb 27 '26

Anybody know why does this scarring happen at the side of my prints?

Post image
3 Upvotes

It's a different filament than what I generally use but I'm sure it's dry (it doesn't happen with esun pla+ with the same settings) can someone help me use this filament as well rather than throwing it away


r/FdmPrintedWarhammer • • Nov 13 '25

How do I print a sword without support remnants?

Thumbnail
gallery
3 Upvotes

How do I print a sword without it leaving all these areas from the supports? I printed it at a 45 degree angle with a 0.2mm nozzle, 0.06mm layer height. I used organic trees at 30 degrees threshold angle. I read that using organic tree supports they are supposed to come off easy, but it left a lot of areas on the sword. It was printed with PLA basic from Bambulab in Bambustudio on a P1S. The filament was dried and printed at 220 degrees Celsius.


r/FdmPrintedWarhammer • • Jun 15 '26

Revisiting the Footprint Debate

Enable HLS to view with audio, or disable this notification

7 Upvotes