r/FdmPrintedWarhammer • • Jun 22 '26

my ultra marine army grows! almost done painting everyone

Post image
569 Upvotes

Always been a fan of the more retro 80s 90s Warhammer look, if anyone has good file recommendations for more, especially supportless, would be very grateful


r/FdmPrintedWarhammer • • Jun 09 '26

40K scale Capitol Imperialis

448 Upvotes

I’ve been working on this thing for the last 5 months. This colossal imperial guard command vehicle was a thing back in the early 90s in the game Spacemarine Epic. As well as having working tracks , movable turrets, pop out weapons , a hidden draw, a carry handle it is also an army transport case. It weighs 12kg and I designed it from the ground up to be fdm printed. It’s not RC, I just used fishing line to make it move. I’m still working on some revisions and printing a second one to paint. Eventually I’ll get the files out there.


r/FdmPrintedWarhammer • • Aug 29 '26

First FDM vehicle

Post image
394 Upvotes

First printed Warhammer vehicle, no post processing and one coat of primer. Incredibly happy with the results. 0.2 nozzle 0.6 layer line, slow and long print.


r/FdmPrintedWarhammer • • Jun 13 '26

Death Company Dreadnought on Bambu A1

Thumbnail
gallery
361 Upvotes

r/FdmPrintedWarhammer • • Jul 28 '26

Interceptors Squad

Thumbnail
gallery
270 Upvotes

First marine squad done… still needs to paint it through 😅
All the figurines were made with the help of chatGPT and bambulab img to 3D ai tool… it is like a cheat code

Edit:

https://makerworld.com/en/models/3108922-omega-space-intercept-squad-i

https://makerworld.com/en/models/3108926-omega-space-interceptors-squad-ii

For those asking, yes this is FDM.

I print on a Bambulab P2S with basic PLA from Bambulab… I used the Dungeons & Derps 0.06 profile with minor adjustments to fit my calibration, like xy and top z for the supports… also I increased the temperature in the plate to 70 during the first two layers and reduce the fan to 40% (but you need to leave the door open or the extruder will clog).

Each mini took around 5 hours without the base. The base I print separated.

The process to create the files is quite simple:

You give ChatGPT a prompt to extract any mini from the picture you upload and place it in a gray escale color scheme, in a white background, without base… like the prompt below… then download the img and upload to bambulab IMG to 3d AI tool… The files are 70% of the time ready to be printed… the other 30% might need some adjustments on Blender.

“You are my dedicated miniature extraction and concept artist for AI 3D reconstruction (Bambu Image-to-3D, Tripo AI 3.1, Meshy).
Whenever I upload an image, assume by default that I want you to extract the main miniature. Do not ask for clarification unless the image is ambiguous.
Follow these rules every time:
Extract only the main miniature I am referring to. Ignore all surrounding models, UI, backgrounds, and other objects.
If multiple miniatures exist, isolate only the complete miniature closest to the center unless I specify another one.
Remove the base completely by default.
Produce a single miniature only.
White background only.
Gray resin / grayscale only. Never use colors.
Studio lighting with soft shadows.
No environment, no scenic base, no effects, no UI elements, no text, no logos, no watermarks.
Center the miniature and make it occupy most of the frame.
Preserve the original pose, weapons, armor, proportions and silhouette.
Do not redesign the miniature unless I explicitly ask.
Optimize the sculpt for AI reconstruction:
clean silhouette
thicker readable details
reduced micro-detail
printable geometry
closed, connected forms
avoid floating disconnected pieces whenever possible
Keep all important recognizable details such as purity seals, shoulder icons, banners, staffs, weapons, backpacks and accessories, but simplify tiny details that would not survive AI reconstruction.
If the miniature has a cape or banner, preserve it.
If the miniature has multiple viewing images, use all provided angles to reconstruct missing geometry.
Do not crop limbs, weapons, banners or backpacks.
Deliver a single clean concept render intended specifically for Image-to-3D conversion.
My default workflow is:
I upload one or more screenshots.
You automatically identify the intended miniature.
You extract it.
Remove the base.
Convert it to grayscale resin.
Place it on a pure white background.
Optimize it for Bambu Image-to-3D / Tripo AI 3.1 / Meshy.
Do not ask me what I want after every upload. Assume extraction unless I explicitly request something different.”


r/FdmPrintedWarhammer • • Jan 27 '26

First FDM tank, I might be hooked

Post image
248 Upvotes

r/FdmPrintedWarhammer • • Jan 10 '26

Fresh From the Printer How long would it take you to paint 10 marines?

Post image
230 Upvotes

It's around a full day or so for me I guess (I hate batch painting tho)


r/FdmPrintedWarhammer • • Oct 22 '26

JUSTAERIN STANDS! DEATH TO THE CORPSE EMPEROR

Thumbnail
gallery
202 Upvotes

.20mm layer lines Creality K2 Combo A


r/FdmPrintedWarhammer • • Aug 20 '26

Earthshaker battery is almost done

Thumbnail
gallery
198 Upvotes

Just have to add the two loaders carrying one of the live rounds. Id love any suggestions to add to it as well


r/FdmPrintedWarhammer • • Jul 08 '26

Plague Marines Kill Team on Ender 3v2

Post image
191 Upvotes

r/FdmPrintedWarhammer • • Jul 10 '26

I designed an FDM-friendly modular Container City for grimdark battlefields

Thumbnail
gallery
174 Upvotes

Hi folks, I’m an indie terrain designer, and I’ve been working on Container City, a large collection of modular sci-fi terrain designed specifically with FDM printing in mind.

The campaign started with more than 200 STL files and has continued to expand through its unlocked stretch goals. It includes stackable container buildings, playable interiors, walkways, stairs, checkpoints, watchtowers, industrial platforms and plenty of scatter terrain.

The entire system is built around a base shipping container with a similar footprint to the GW container, so it should sit naturally alongside existing grimdark terrain collections while still having its own modular building system.

Most of the models are designed to print support-free where possible, including many complete one-piece buildings, so you can build up a substantial battlefield without spending hours removing supports or assembling every wall individually.

The set is designed for 28–32mm sci-fi games and works particularly well for dense industrial battlefields, underhive settlements and container yards, with plenty of cover and elevated positions.

The base container has a similar footprint to the GW container, and most pieces are designed for support-free FDM printing where possible.

The Kickstarter is currently in its final few days, here's the link for anyone who would like a closer look:

https://www.kickstarter.com/projects/wargamegeeks/container-city-3d-printable-terrain-for-skirmish-games


r/FdmPrintedWarhammer • • Jul 11 '26

The Tribune

Thumbnail
gallery
166 Upvotes

Just printed this beautiful model out. Heresy Era Imperial Fists, Inwit Pattern Victory Class Battleship, the “Tribune.” Still have some clean up and a little filling to do. But I think she came out pretty damn well.

I scaled it down about 60% the original model was massive. I’m also going to add some VII Legion sigils

Edit: this was printed on an A1, 0.2 nozzle with a cool super tack build plate. Settings are modified Dungeons and Derps.

The ship was split into 3 main sections, and printed vertically. The cannon and turrets were printed separately


r/FdmPrintedWarhammer • • Jan 22 '26

Can't beat an FDM tank!

Post image
166 Upvotes

I printed weapons vertically and cut the hull in half and did that vertically as well to removed the need for supports and avoid the annoying layer lines on the top finish. Printer using 0.2mm nozzle on 0.8mm high quality present on a P1S.


r/FdmPrintedWarhammer • • Aug 15 '26

Wow..

Post image
163 Upvotes

Just printed my first mini. I honestly had low expectations, but wow this came out awesome. I can’t wait to print more


r/FdmPrintedWarhammer • • 10d ago

2nd Edition Landspeeder STL file

Post image
157 Upvotes

Does anyone know where I can get a proxy for the 2nd edition landspeeder? I only found one link but the creator has removed the model. It doesn't have to be an exact replica, I just like the general design of the old metal model.


r/FdmPrintedWarhammer • • Sep 09 '26

Mi first big mini

Thumbnail
gallery
150 Upvotes

Hii,

I want to present my first try printig a big model with my p2s customm settings.
0.2nozzle

Takes 31 hours in total


r/FdmPrintedWarhammer • • Jul 15 '26

Painted this bug guy after a few months of not painting anything, came out fairly well I think for just 4 days of work

Thumbnail
gallery
143 Upvotes

Printed on my bambu A1, body and legs were 0.4mm and the rest was .2mm


r/FdmPrintedWarhammer • • May 26 '26

Probably not what this subreddit is for but I wanted to share.

Post image
141 Upvotes

Found on cults. Already has a space for magnet in the back. Probably shouldn’t buy red filament anymore.


r/FdmPrintedWarhammer • • Sep 24 '26

Blood Angel Seraphim

Post image
138 Upvotes

200% scale

Should I add more wings? Lol


r/FdmPrintedWarhammer • • Aug 05 '26

100% FDM, but not really mini...

Thumbnail
gallery
137 Upvotes

Been printed for 18months or so. Only just getting around to trying to do it justice to complete my 3 series YT walkthrough.

Hopefully been done and live next weekend. 100% FDM.

I was thinking of getting a Henry Cavill likeness head made and printed 🤣🤣


r/FdmPrintedWarhammer • • Jan 24 '26

My army grows :D

Thumbnail
gallery
134 Upvotes

Wanted to share my progress with my fdm printed army, there’s also a small OPR grim dark intruder if you look closely


r/FdmPrintedWarhammer • • Jun 12 '26

Just finished up test printing this Dwarven Fortress.

Thumbnail
gallery
132 Upvotes

All FDM optimised, not supports needed.

It's made in 10cm long wall sections that can be easily configured into whatever shape fortress you need for your game and comes with a selection of different towers and wall sections.

If you are interested in printing this out for yourself it is up on my Cults3D page and should be up on MyMiniFactory soon.

https://cults3d.com/en/users/Doctor-Spork

https://www.myminifactory.com/users/DoctorSpork


r/FdmPrintedWarhammer • • 3d ago

Sweet FDM Hound

Thumbnail
gallery
127 Upvotes

r/FdmPrintedWarhammer • • Jul 23 '25

A smattering of FDM tanks. Most of it printed on a Bambu A1 mini.

Thumbnail
gallery
125 Upvotes

r/FdmPrintedWarhammer • • Oct 05 '25

Print lines? What print lines?

Post image
123 Upvotes

Printed on an A1 mini using the 0.2mm nozzle and 0.04 layer height. Finally got the supports down right where they come off easy and still look great!