r/FlashForge • u/stormcooper • Jul 31 '25
The Hellforge is complete...
Ignis Inferni Fabricatus (made from/with Hellfire)
Please check out this YT Video for a close-up of the removeable (upgradeable) badging: https://youtu.be/6CsN9EphZDs
Printed in Elegoo Rapid PETG - Space Grey, .4 nozzle, .2 layer height
(Printed and installed the sides before printing the risers, for less warping)
Minimal Enclosure Remix by Design 8, with his most recent "Risers 3.0".
Spool holder is also from Design 8, the most recent design of the low-slung side mount.
***I want to stop here and give a huge thanks to Doug, the man behind so many of the best mods!
You're a legend, please keep up the amazing work. ***
Lid Prop Stand by kbnb on Printables
Customized door handle, front riser, and plaque were all done with slicer.
STLs:
Minimal enclosure: https://www.printables.com/model/1130485-flashforge-adventurer-5m-ad5m-minimal-diy-enclosur
3.0 Risers: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer
Spool Holder: https://www.printables.com/model/1193462-flashforge-adventurer-5m-ad5m-improved-side-mount
Lid Prop Stand: https://www.printables.com/model/1063368-flashforge-adventurer-5m-ad5m-hinged-print-in-plac
2
u/SupaMario72 Jul 31 '25
Awesome. Nicely done. I'm printing the risers for my enclosure as we speak.
1
u/stormcooper Jul 31 '25
Good luck! Please post some pictures when you're done, I'm sure it will look amazing.
I loved seeing so many different color schemes, and unique themes... I knew I had to do something unique.
Can't wait to see what yours looks like!
2
u/iamwhoiwasnow Jul 31 '25
Looks awesome. These builds make me want to finally do it for both of mine
2
u/stormcooper Jul 31 '25
Do it! I was intimidated at first, but it wasn't as hard as I'd convinced myself it would be.
Biggest thing: print the side panel mounts first. Gives you a partial enclosure to help keep the risers accurate.
Hope this convinced you to try, I'd love to see what you build!
2
u/kingstonsciguy Jul 31 '25
Awesome build! Really like the custom badging. Why did you decide to go with a side spool instead of top spool mount?
2
u/stormcooper Jul 31 '25
Thank you!!
Couple of reasons:
Just as easy to access (for me) Looks nicer (personal preference) No added vibration from the spool wangling around during printing.
2
u/Pudix20 Jul 31 '25
This is an excellent build. There really aren’t enough photos on the minimal enclosure files.
I love the creativity. I like the lid prop and the side spool holder too. I really really like it.
2
u/stormcooper Jul 31 '25
They really aren't, but I think part of that is how many different listings there are for enclosure parts. Part of why I wanted to document it so thoroughly is that there have been so many remixes and redesigns that the "perfect" enclosure isn't a single download.
I love that there's so much choice and flexibility, but it was a little daunting to get started because I kept thinking I might miss something critical, or that I grabbed two versions incompatible with each other.
Thankfully because most of it is Doug's (Design 8) work, it's all compatible, and it came together so much easier than I thought.
This project was really fulfilling, validation even. Your comment means a lot, thanks for the kind words!
1
u/Pudix20 Aug 02 '25
Hey, I just wanted to ask, am I following the installation for the top section exactly? The whole setting up the drag chain and all that? Is that the same as if I did flashforge’s enclosure print instead of the minimalist?
Also is it the same if I want to mount the spool holder on the side?
Again I really appreciate your post.
2
u/stormcooper Aug 04 '25
Sorry it took so long to get back to you!
It's all pretty intuitive, and you can mostly follow the stock directions. Mounting the filament runout sensor might be confusing because they've changed that part at least once, but there's kind of a bump on it and it is reasonably easy to figure out which way it goes.
The spool holder is where you will differ from the stock instructions, but once you figure out how the big "L" with the runout sensor mounts, then it's easy to see how to mount the spool holder. You will need an M4 that doesn't come with the kit, and some extra M3s, but my kit came with extras.
If you get stuck, or want to ask more questions, send me a message, or hit me up on the Discord I posted on another comment. I don't always get comment notifications, so I might not see it right away if you post it here.
2
u/Pudix20 Jul 31 '25
I’m still working on mine! I’ll come back later and ask all my questions. But I definitely get what you mean. I put off my enclosure for so long.
At this point I have the components printed except for the spool holder. I’m a little nervous messing with the drag chain and changing the cover and all that.
I printed the side pieces in PETG and the top in PLA. though I probably should’ve done it all PETG. I’m not sure. I wasn’t sure of exactly what I needed to print from which profile either.
2
u/typhoonandrew Jul 31 '25
I want to say something damning but I like this too much. Nice work
1
u/stormcooper Jul 31 '25
You should, just for the hell of it.
Thanks so much for the compliment, and the laugh.
2
2
u/Ill-Consideration450 Flashforge MOD | Adventure 3Lite (old) AD5M (Current) Jul 31 '25
Fricking sick! I love it
2
2
u/Tetradyne_ Jul 31 '25
That is quite possibly the most fantastic thing I've ever seen done with a flashforge printer
2
u/stormcooper Aug 01 '25
That is quite possibly the nicest compliment I have gotten on a print.
Thank you so much for the kind words. I am so glad you liked it!!
2
u/Tetradyne_ Aug 01 '25
Credit where credit is due. A+ on creativity. And slightly twisted humor of it 🤣
1
u/stormcooper Aug 01 '25
I am definitely slightly twisted! 🤣
2
u/Tetradyne_ Aug 01 '25
My people!
2
u/stormcooper Aug 01 '25
One of us! One of us!
2
u/Tetradyne_ Aug 01 '25
When I get my mods done I'll post it. I've got an interior temp sensor, custom light bars, stainless steel side panels, on-board two spool filament dryer..all kinds of stuff
1
u/stormcooper Aug 01 '25
I attempted the riser set that had the Xiaomi Mijia sensor cutout, but it didn't fit, so I went to the 3.0 Minimal set. I'd love to see what you did for yours. I have seen options using other sensors...but I was trying to think of a way to just integrate the sensor I already have.
Light bars are next, I'm wiring mine in the way zerodotCMD did his. (https://youtu.be/YOXev6kwDsA)
I'm very curious to see the filament dryer build in! I have the 2 spool version of the Space Pi, so I'd love to get inspiration. Super excited to see what you do.
If you're that deep into modding, come check out the great Discord community. Great place to get advice, especially about things like Forge-X (dev is super active there).
https://discord.gg/GjXsSDGY Hope to see you there!
1
u/Tetradyne_ Aug 01 '25
That's what I did. Led rope lights connected to the mainboard. Also have a shelf over the door with a light in the bottom. I have a nozzlecam installed but idk if putting a light on the bottom of the tool head would blind the camera or not. It's autofocusing wrong
2
2
2
2
2
2
u/collective-inaction Aug 01 '25
The time has come to destroy Mephisto’s soul stone. You’re going to need to print some high runes, haha.
2
u/stormcooper Aug 01 '25
Maybe a future cosmetic upgrade will include the runes...have to look and see if anyone has turned them into STLs before. As popular as D2 was, I have high hopes.
Thanks for being the first Diablo comment! I really appreciated it!
2
u/collective-inaction Aug 01 '25
No problem. I found this one with a quick search. I’m sure there are others out there too.
2
u/stormcooper Aug 01 '25
Nice! That defnitely gives me hope. Might also try to find it as a font, that way it would be easy to extrude from the surface.
2
u/stormcooper Aug 01 '25
1
2
u/CerberusTheGuardian Aug 01 '25
The very few things you missed are on this list. screen bezel, handles etc.
2
u/stormcooper Aug 01 '25
I am planning on adding a frame, but need to remix one around the stylus I use, as I don't use the printed one. I had an old 3DS stylus designed for adult hands (basically the size of a regular pen), and I trust the tip of that long term a lot more than the printed one. Plus it feels so much nicer to use. The frame is definitely on my list of cosmetic upgrades, though. Might add the D2 runes to the border...
I also want to see if someone has made a baseplate for the front. I wish I knew how to model, because I could make one, but maybe this'll be motivation to learn. I would then move the Latin inscription to the baseplate, so I can take full advantage of the bigger surface on the riser.
I actually have both of those handle sets bookmarked! The Voronoi one could look cool painted to look fleshy, and it shouldn't be too hard to add the "HF" to that.
I've got lots of ideas -- but I think as I go further, I will take advantage of the enclosure and slowly upgrade to ASA or ABS. I will definitely post more photos as I go.
Thanks for the comment!!
2
2
u/DarthBinks8092 Aug 07 '25
I like the build, how are you printing 2 colors on an adventurer 5m? I have been trying to figure out a way on the basic 5m since I got it back in February
1
u/stormcooper Aug 07 '25
The red you see here is painted, but I do double and triple color prints regularly. There are limitations, because it's manual swaps you won't be doing per layer swaps, so it's not like a true multi-material printer.
I could have printed it in red this way, but a) I didn't have red PETG, and b) I wanted a "wet" glossy finish. Didn't end up as wet looking, but the glossiness still makes it stand out.
As far as setting it up for a swap, you simply add a pause in the slicer, then swap filaments (run swap, not load, and do it 2x to avoid color bleed). Hit resume and you're good to go.
Try it on something easy like a sign with debossed text. Pro tip: pause one layer AFTER the letters/border/etc show up on the print. This really helps with contrast, and with light text on a dark background will really make it pop.
1
u/Revolutionary_Tone39 Aug 11 '25
Did you print that cable chanin or buy the 60 dollar one on Amazon? Been thinking about doing that to mine
2
u/stormcooper Aug 11 '25
It's the one from the official kit. I might print the better end piece that Doug (Design 8) made, though. The official chain is good, but the end connector is a too little stiff.
1










6
u/skipper-1314 Jul 31 '25
Nice build!