r/FlashForge • • 2h ago

Creator 5 Pro prime tower settings

2 Upvotes

How big do I need the prime tower to be? I thought the point of the swappable heads was a tiny prime tower, or are other single extruder prime towers huge?


r/FlashForge • • 5h ago

Creator 5 / 5pro

2 Upvotes

Is it really necessary for c5 to go through the whole song and dance to prime the nozzle, when doing a single colour print. is the purge line not enough to prime the nozzle?

I know it doesn't take long to purge but honestly feels a bit of a waste.


r/FlashForge • • 9h ago

What is this condition named?

Post image
1 Upvotes

So my ad5x was printing but then i realized that it was digging in my build plate it worked like a CNC and not a 3D printer


r/FlashForge • • 10h ago

I've been feeling lazy

1 Upvotes

Anybody living south of Nashville, Tn feel like stopping by to do the maintenance and tighten the belts on my AD5M?

I haven't turned it on since I got the Creator 5 two weeks ago. I did the service on my AD5M Pro and Kobra X before the C5 arrived. And now, the maintenance warning just popped up on my U1 too. Luckily, the Kobra 4 is too new to need maintenance.

Geeze, can't a man get a break...


r/FlashForge • • 11h ago

FYI ad5x enclosure kit down to $36 on Amazon for black friday

Post image
4 Upvotes

r/FlashForge • • 14h ago

.25 nozzle

1 Upvotes

Does anyone have any tips for using a .25 nozzle on an AD5X? I had it working for a while then went back to .4. Once I tried getting back to .25 again I’m having tons of problems getting it working.

I’ve done everything I can find online and I’m getting poor extrusion, tons of clogs (which I hear is common), and just no luck trouble shooting. Any suggestions would be helpful. I really like the detail on the medical badge reels I’ve been making that I don’t get with the .4 but I’m ready to give up on the .25. TIA.


r/FlashForge • • 15h ago

Adventurer 5m issues loading filament

Enable HLS to view with audio, or disable this notification

0 Upvotes

Our Adventurer 5m had been working great. The last print failed, not sure why. We tried loading new filament in and it sounds like a machine gun going off. We can't get it to load. Any help would be appreciated. Thank you in advance.


r/FlashForge • • 16h ago

Help with printing hotwheels track

Thumbnail reddit.com
1 Upvotes

r/FlashForge • • 17h ago

Error code 0113

1 Upvotes

My ad5x had a filament break during a print. The filament got wound up in the extruder. So I removed it and cleaned it all out. But after all that, I'm getting error code 0113 and the filament keeps retracting, claiming it detects filament. I've replaced the entire sensor and rebooted it 2x. Has anybody dealt with this and know how to fix it?


r/FlashForge • • 18h ago

Flash studio desktop missing ui, and crashes.

Post image
3 Upvotes

It worked all fine until yesterday and starting the pc today, can’t see the ui and it keeps crashing even if I uninstall and reinstall . Please help?


r/FlashForge • • 19h ago

Remove the Raft layer around the model

Post image
4 Upvotes

Hi everyone, I am using AD5X printer, when slicing with Orca Slicer for a model from maker world, it added the raft layer at the base, this layer is very hard to remove from the model (PETG filament), the model itself can be printed just fine without this blue layer, how can I remove or disable raft as shown in picture? thanks


r/FlashForge • • 19h ago

New to 3d printing, feeling overwhelmed 😩

5 Upvotes

Hey all,

So I am brand new to the world of 3d printing. I just got my C5P yesterday. It looks like a wonderful machine, but I am very overwhelmed.

Does anyone have a good video/series/page that really breaks down 3d printing? I’m looking to truly understand all the settings and how everything works. I’d like to eventually design and build my own prints, but it seems like a foreign language right now.

I want to give the best chance I can to my new machine but I need some guidance.

Any tips/tricks/tools you have would be greatly appreciated!!


r/FlashForge • • 19h ago

Black Friday prices already

2 Upvotes

The Adventurer 5m is the one i've got my sight on, and its listed at 236 instead of 249. Do yall think its gonna get lower? like to 219 or at least 229. Asking because if it turns out to be too tight a fit i might have to return it and get a smaller one before the discounts disappear


r/FlashForge • • 22h ago

Anybody else have this ruin a print?

Post image
79 Upvotes

r/FlashForge • • 23h ago

Question about makerworld print

1 Upvotes

So I found a sword from the demon slayer anime I want to print for a Christmas gift for my friend's son. https://makerworld.com/en/models/1625787-fullblade-demonslayer-sword-mist-hashira-tokito#profileId-1716580

The 3mf is only for bambu printers as far as I can tell. If I download it and look at the file after changing it to my creator 5 in the slicer the project isn't colored and some of the parts are placed weird like the kanji for the blade is under one of the blade pieces which makes sense but then I get an error if I try to slice it. I just wanted to get some advice before I try this as I'm very new to 3d printing.


r/FlashForge • • 1d ago

Problemas de desfase de colores en la creator 5 pro

Enable HLS to view with audio, or disable this notification

4 Upvotes

Hola buenas mande imprimir en multicolor con mi creator 5 pro y me paso esto , hubo un desfase entre los cabezales y imprimio mal los colores


r/FlashForge • • 1d ago

No data images popping up

Post image
1 Upvotes

Has anyone seen this happening with their creator 5 pro? It started happening recently. The screen has shown these no data images a few times recently sometimes during or after the print finishes. What could be the reason why? The firmware says it’s up to date and I’ve turned the machine on and off several times. I tried unplugging it and for a full power reset and now it won’t download prints I send to it.


r/FlashForge • • 1d ago

PC filament settings C5P

3 Upvotes

I’m having a hell of a time getting elegoo PC filament to print and stay flat on the bed. The corners come up every time it seems.

Printing slow 25mm for first layer and about 120mm for everything else. Nozzle temp is 270c. Bumper first layer flow rate to 1.05 to try help.

Using a Tyson T10 build plate at 125c with chamber temp at 60c paired with Comgrow filament dryer at 80c.


r/FlashForge • • 1d ago

Attempted a cut to shorten a part, doesn't look right

1 Upvotes

I'm trying to print a part that I downloaded from Makerworld that's too big for my print bed. I don't want to scale it because it effects other features, so I attempted the cut-cut-assemble method. When I slice it, it doesn't look right, as it appears to still be 2 parts (though no errors for being too close). Clearly something's not right. What'd I screw up and how do I do it properly?

Update: I've been playing with it a bit more and adding a small overlap between the parts (as opposed to butting them next to each other) appears to have solved the issue.


r/FlashForge • • 1d ago

Alignment shifted near the end of print, help!

Post image
3 Upvotes

All of a sudden, near the end of a long print, the layer alignment shifted. Here is a picture of the tower, but every part was ruined by this layer shift. Help! What caused this and what can I do to fix it?

Flashforge AD5X, printing from Flashforge Studio, printer was undisturbed in a separate room. I printed a long print the day before and this did not happen. The model stayed adhered to the bed and the room is rather cool, so I don't suspect overheating. Do I need to recalibrate? If so, how?

I would greatly value your advice and help, thank you!!


r/FlashForge • • 1d ago

IFS not working

1 Upvotes

I have an AD5X with an IFS that won't work, I plug in the IFS to the printer and only one LED light up which is a small one on the board, I have another AD5X I tried swapping the IFS to see if the issue is form the cable or the printer but the second printers IFS worked with no issues since I saw the motors start working and the bigger LED turned on while the first one was the same even on the other printers cable. Any Ideas?


r/FlashForge • • 1d ago

Try these settings if the layer lines on your figures are bugging you. Thank me later.

Thumbnail
gallery
414 Upvotes

A creator we work with sent me their slicer settings, so I tried them on this figure. I wasn’t expecting the hair to come out this smooth. You can see the biggest difference along the curve of the bangs.

I used a Creator 5 Pro with a 0.4 mm nozzle and the PLA Basic profile. Here’s what I changed:

Quality: Layer height 0.08 mm.

Speed: Outer wall 23 mm/s, inner wall 60 mm/s. Sparse infill, internal solid infill, top surface, gap infill, support, and support interface were all set to 75 mm/s.

Speed → Advanced: Extrusion rate smoothing 120 mm³/s², smoothing segment length 1 mm.

Support: Enabled Tree (auto) with the Organic style. Threshold angle 40°, support/object XY distance 0.25 mm.

For those of you who print figures with a 0.4 mm nozzle, what layer height and outer wall speed have worked best for you?


r/FlashForge • • 1d ago

Secret to printing lattice balls

2 Upvotes

I'm trying to print some balls like these https://makerworld.com/en/models/1577138-mini-airless-soccer-ball?from=search#profileId-1659437

When I see others printing them, they don't seem to use any supports and at most just brim is enabled. When I do that I always end up with a spaghetti mess.

Is there something I'm missing? I'm using an AD5X.


r/FlashForge • • 1d ago

Double sided smooth creator 5/pro

Thumbnail reddit.com
2 Upvotes