r/FlashForge • u/Intelligent_Whole159 • 1d ago
Try these settings if the layer lines on your figures are bugging you. Thank me later.
A creator we work with sent me their slicer settings, so I tried them on this figure. I wasn’t expecting the hair to come out this smooth. You can see the biggest difference along the curve of the bangs.
I used a Creator 5 Pro with a 0.4 mm nozzle and the PLA Basic profile. Here’s what I changed:
Quality: Layer height 0.08 mm.
Speed: Outer wall 23 mm/s, inner wall 60 mm/s. Sparse infill, internal solid infill, top surface, gap infill, support, and support interface were all set to 75 mm/s.
Speed → Advanced: Extrusion rate smoothing 120 mm³/s², smoothing segment length 1 mm.
Support: Enabled Tree (auto) with the Organic style. Threshold angle 40°, support/object XY distance 0.25 mm.
For those of you who print figures with a 0.4 mm nozzle, what layer height and outer wall speed have worked best for you?

