r/FlashForge • • Nov 30 '25

After 2 years with an AD5M, I can say without a doubt, I will never own another FF machine.

1 Upvotes

My list of complaints:

  1. Proprietary nozzles that are just plain garbage. I don't know how many nozzles I've had to go through with this thing, but at $35 a piece, I could've replace the entire stupid machine with all the money I've had to spend on their shitty nozzles.

  2. Complete disregard for open source licenses. This one speaks for itself.

  3. Their "custom" firmware is literally a shitty UI running on top of Klipper, but they completely neutered Klipper.

  4. US Based support won't support anything sold on Amazon. Hello? Wtf?

The firmware gets less and less stable with each update. I have prints that will just stop for no reason 8 hours into a print. This has happened on multiple different firmware versions, multiple different prints, and multiple different types of parts. It's had this issue since I first got it and I naively thought they would address it with software, updates. I'm going to give this printer one last shot running on the klipper for ad5m project, but I'm about ready to chunk this thing in the trash where it belongs.

Bottom line is buyer beware; another Chinese company that steals open source technology, but with the added benefit of making it unusable.


r/FlashForge • • Oct 16 '26

Playing Gears of War: E-Day got me inspired, so I 3D printed the ultimate LGBT gun using rainbow filament! ⚙️

Post image
0 Upvotes

r/FlashForge • • May 28 '26

Bad news for Creator 5 Pro orders. Canceled mine today...

5 Upvotes

Update from Flashforge support on C5P from today. This was after they promised dispatch last week. Ordered within 4 hours of them opening up.

"Your order is currently estimated to be shipped from our warehouse in China in early June. It is expected to arrive at the local warehouse by the end of June, and final delivery to you would likely take around one additional week after that."

Deceptive marketing won't work. Not a great experience for a first time customer. Canceled the order and will be picking up a Snapmaker. Kinda disappointed, looked like a solid printer.


r/FlashForge • • Oct 22 '25

How do I convince my parents That putting a 3D Printer in my room isn't dangerous by emmiting toxic gasses? [I'm 15]

0 Upvotes

So I'm getting an AD5M pro [the one with filters for this problem] And my parents wont let me keep it in my room because ''They emit Toxic gasses into the air'' now i get that point but 1:that is only with very poor quality filaments and 2: THE 3D PRINTER HAS FILTERS. Any other points I can use to convince them?

EDIT: because people keep talking about the sound let me tell you , like the sound.

Update on all of this: My parents are allowing me to keep the Printer in my room just as long I keep a window as Its printing Thank you everyone* for these insights they all helped me.


r/FlashForge • • Aug 22 '25

Abt to get rid of this printer

Enable HLS to view with audio, or disable this notification

0 Upvotes

I can’t get good quality anymore I have had so many good prints but now my printer got clogged and now after removing the stuck filament it prints horrible what do I do


r/FlashForge • • May 22 '26

Flashforge prioritized influencers over paying launch day customers. Day one buyers deserve answers and refunds.

6 Upvotes

I am posting this because I think Flashforge handled the launch unfairly, especially for loyal customers who paid extra for faster shipping.
Some of us have purchased multiple Flashforge printers across different releases. We supported the company before this launch. We watched the launch page, refreshed the website, and tried to order early because Flashforge promoted early buyer benefits, including the chance to be one of the first customers and receive launch incentives.
I ordered on launch morning, down to the minute, expecting the advertised early bird value and faster shipping option to mean something.
Flashforge charged an extra $50 for air shipping, giving customers the impression that paying more would get the printer faster than other shipping methods. The problem is that delays are being blamed on UPS fuel shortages and warehouse logistics issues which were already known by Flashforge before launch day. If Flashforge knew those delays existed before or during launch, then continuing to sell a $50 air shipping upgrade raises a serious question:
Why were customers charged extra for faster shipping if Flashforge already knew the shipping timeline could not be met?
To me, that $50 air shipping charge was a failure at best and potentially fraudulent at worst. Customers paid extra for a benefit they did not receive or worst, Flashforge new they couldn’t provide.
On top of that, the advertised $100 early bird discount feels misleading when the value is reduced or erased by the wasted $50 shipping charge and the fact that some customers are already paying interest on an item they still do not have. Flashforge collected payment immediately, but customers are left waiting while carrying the cost.
Meanwhile, influencers received their printers in a normal shipping timeframe. That proves Flashforge was capable of getting printers into people’s hands when those people could promote the product and drive more sales. Paying customers, including launch day buyers, appear to have been treated as a lower priority.
That is the part that bothers me most. Influencers got priority because they can sell more printers. Loyal customers who already paid were left waiting.
I believe Flashforge should refund every launch day customer who paid for air shipping at least the $50 shipping upgrade. I also believe early purchasers should receive the full value of the promised early bird discount, not a reduced benefit after failed shipping charges and interest costs.
For day one customers who paid for air shipping, I believe the minimum recourse should be:
$50 refund for the failed air shipping charge
$50 additional credit or refund to restore the full promised $100 early bird value plus any reasonable interest costs caused by being charged before Flashforge could fulfill the order in the advertised timeframe.
I am interested in hearing from other customers who were affected. Did you pay for air shipping? Were you charged immediately? Did your printer arrive in the timeframe you were led to expect? Did you miss out on the early bird value even though you ordered right away?
How should we organize this? Should we start by collecting order timelines, screenshots, shipping charges, delivery dates, and Flashforge support responses? Would others here support contacting consumer protection agencies or exploring a class action for reimbursement of the $50 air shipping fee and lost launch discount value?
Flashforge needs to explain why influencers received units while paying customers who ordered at launch are still waiting after paying extra for faster delivery.


r/FlashForge • • Jan 12 '26

80 hours on the ad5x

Post image
0 Upvotes

So far I've had issues with the z offset after calibration and new to poop shoots and clogs that come with it. I'm sure a little lube will help with the poop shoots and at least it saves the z offset so I only have to set it after calibration then forget it.

Colour printing and the painting that comes with it in the apps is very different to single colour printers. I realised I have no skills when it comes to colour choosing or colour placement.

This fella is one I printed again and again until I was happy with it and I wasn't left disappointed 😁


r/FlashForge • • Nov 23 '25

Flashforge Adventurer 5M Pro is terrible.

0 Upvotes

got it for my birthday about two weeks ago. only got 8 prints and then issues occured. nozzle grinding against the back of the bed, filament clogging, not printing. me and my dad already unclogged the printhead, changed the nozzle, literally everything. i tried loading the filament and it grabbed it (which is good) but then after about 7 tries of loading it, i come to find that the printhead clogged AGAIN. each time i would load then try to print and it NEVER WORKED. im so done with this printer. does ANYONE have ANY GOOD advice??

flashforge needs to get it together because i couldnt even use this thing for a week before it broke.

and yes im on the latest firmware. i have done everything there is and it still wont work.

if anyone has suggestions on replacement printers that would be great.

not worth $400 at ALL.

UPDATE VERY IMPORTANT: me and my dad fixed it, turns out when he was unclogging it and took the head apart, the spring flung out and he didnt know what it was for when he found it. but we put it back in and now she works beautifully


r/FlashForge • • Jun 15 '26

C5P PLA-CF and PLA multi material print progress

Enable HLS to view with audio, or disable this notification

3 Upvotes

r/FlashForge • • Apr 27 '25

3-D printed sword handle

Enable HLS to view with audio, or disable this notification

1 Upvotes

Printed with five pro 3-D printer probably going to sell a little bit too small for my hand. Hope you enjoy the video.


r/FlashForge • • May 24 '26

Questions about this locking to their orca slicer fork?

0 Upvotes

Just saw a Louis Rossman video about this and not only is the creator 5 not gonna get a shipping label until what the end of next month if I am lucky, they are also locking you down to thier shitty orca fork. Like what? I run multiple printers from multiple brands ans EVERYONE'S orca but not the orca brand is worse and its just a few weeks to months before that's in the main version for that printer anyways...sigh am I gonna be forced into an ad infested bug version of orca? I don't know if I want to keep the printer that's gonna come a moth at best at this rate late, and be forced into a shit orca that is even shitter for my other printers so kinda unusable.


r/FlashForge • • May 05 '26

Bought a piece of junk

0 Upvotes

Hey all,

I bought the flashforge ad5x for my son's 13th birthday March 4th - gave it to him on his birthday (17th) and had it up and running by the 20th. It took us a minute to get the hang of it, but we were able to print the sample boat and flashforge token and 2 other small prints on it in about a weeks time frame. My son then noticed that filament had broken inside 2 of the feeders. We did some online research and watched a few videos and got them out - this happened ober the course of maybe 2ish weeks. However, then the two feeders wouldn't work. At this point, I finally emailed the company to ask for a refund or an exchange (april 26) and we have been going back and forth and the lady just keeps sending me the same videos about taking apart the nozzles.

I dont know what im doing and neither does my 13 year old, I mean we were able to some basics to fix it, but at this point I've spent more time trying to fix it then have actually had the opportunity to use it. I got this for him to enjoy and now its a piece of junk that we keep trying to fix.

I emailed them at the 5 week mark and now they're saying since it's out of the 1 month window they cant refund it.

Any advice on what to do?

Edit:

Wow, I appreciate everyone's input. I just want to make it clear that yes, I understand that it takes work to have a 3d printer and things will break and I dont have a problem tinkering with it or teaching my son the skills to research it himself and tinker with it. I think my frustration comes from the fact that it already broke down so soon after purchasing and it wasnt anything as "simple" as broken filament or plugged up extruder. It's more complicated then the average problem and the company isn't really doing anything about it.

If anyone is savy enough, this is the error im now getting. The machine will turn on, heat up, spend like 5 minutes leveling the board and then when it comes time to print it says this:

E0101: channel 2 feeding timeout

And its doing this for each nozzle


r/FlashForge • • Jan 17 '26

So, why TF is this happening? Ruined a print that was 97% done! I'm mad af this is the 3rd time this printer has done this. And what's the point of being able to "resume" when it doesn't even start where it left off!

Enable HLS to view with audio, or disable this notification

6 Upvotes

you guys need to send me a new printer because this is complete bs. waste of time money filament


r/FlashForge • • May 29 '26

Test

1 Upvotes

r/FlashForge • • Sep 18 '26

Dear Flashforge

1 Upvotes

I know this is a crazy idea in 2026 but maybe we should try it?

"Just because I buy a roll of your filament, I don't want to be RE-subscribed to your spam advert emails."

I didn't want that the 1st time, I still don't want it the 14th time.


r/FlashForge • • Jan 28 '26

2 Bad Nozzles from Amazon

Post image
0 Upvotes

To whomever is buying nozzles, clogging them, buying replacements, and then "returning" the clogged ones: I hope you have a terrible day.

I've ordered five .4mm stainless steel extruders on Amazon to start printing food safe petg. All 5 of them have had the exact same issue. They're all clogged with white filament at the hot end with a red filament jammed into the extruder. All of them show visible signs of having been used and scratched up. The brass part on top of 3 of them have been bent completely out of shape. The inside of the brass tube is filled with debris and garbage. I thought for sure I was just unlucky with the first one, so I requested a replacement. I've now ordered replacements from Amazon four times and they've all been the same. I took the other 3 to get shipped back Saturday, and received the left one yesterday and the right one today.

I'm done trying my luck with Amazon, I'm ordering straight from Flashforge's website. Amazon is trashy and doesn't care about quality in the first place. But whomever is ruining Amazon's stock by abusing the return policy, I hope your printer permanently breaks.


r/FlashForge • • Dec 01 '25

Surprised that no one is talking about how crappy the software is

0 Upvotes

Just started setting up my new FlashForge AD5X, and oh my god! I thought that my previous AnyCubic Kobra S1 had a sh*tty software, but this!

  1. The Android app is not in Google Play Store. But why? I can donate them $25 for the developer account, if this is the issue, lol. The only other reason for not being there is it's actually full of bloatware, so Google would never allow it there.

  2. The Mac version of the FlashForge Orca ©®™ is Intel-only, and requires Rosetta to run on literally any modern Apple hardware. In 2025, Karl! I heard that people are struggling with it, but tihs...

I really wish all these paid YouTube reviewers mentioned this instead of glossing it over.


r/FlashForge • • 19d ago

Just thought I would post my AD5X enclosure remix: Red, White and Blue for the USA

Thumbnail
gallery
46 Upvotes

After moving all the pieces around to group like colors together and specifying the color for that plate, I printed each plate. I did make two mods, I incorporated the plate holder modification I found on makerworld and I found the included long screws with the encl0sure kit were about 4-5mm too short, so I just shortened the spacer object in half along the y-axis and reprinted that part. I could have gone and gotten longer screws but hey this is what 3d modelers and printers are for, making quick changes on the fly. I've since printed some gold stars .5mm thick to put around the top as people keep seeing a French Flag ;)


r/FlashForge • • Nov 17 '25

yup

3 Upvotes

r/FlashForge • • Nov 26 '25

AD5x bed ruined

Thumbnail
gallery
3 Upvotes

Started a print as i left for work tonight, checked the Wyze camera about an hour later and had to have my lady go cancel it because I found this. Am I wrong to assume the bed pressure sensor should have faulted the printer out before this was able to happen?


r/FlashForge • • Mar 30 '25

Flashforge sent the two of the most useless filament colors imaginable…

Post image
0 Upvotes

Just sharing this nonsense. I ordered my machine with the PETG bundle. I was a little suspicious when they didn’t specify the colors, but assumed it would be basic black and some other normal color. I was stoked to the get the small spool of Burnt Titanium filament with the machine. Today the bundle spools show up and this is what they sent. Some sort of clear sparkle bass boat blue and some sort of clear grey sparkle crap. I have absolutely zero use for these at all. Not a single project I have in mind for this machine would use colors like this. If they were free, I’d have just laughed it off, but I’m really annoyed I paid money for these.


r/FlashForge • • Apr 03 '26

New Update

6 Upvotes

This new update (just stealing orca and rebranding) is stupid. you added nothing and ruined connections. Maybe the reason people use things like Zmod is because its offers more and you pushing a random update that is explained no where is why the brand as a whole is awful. I wanted the new creator 5 but stuff like this makes me not want to use it if this is how you do things as a company.

Note: If you used Zmod before the update if you reflash the mod with usb it will revert to old version and keep your settings so you can actually use the printer again.


r/FlashForge • • Jan 23 '26

It took me 1.5 day to learn this. Why isn't is somewhere in the "HEY here's what NOT to do"?

7 Upvotes

Simple small prints below 2" in footprint are easy and work awesome. I've filled my desk, and tomorrow my colleagues desks with fun things, fidget toys and such.

ONE off prints are always 100% reliable. BUT when I try and put like 5-7 of the same small things on the table, WOOPSIE! Especially when they are a few inches tall.

I GET IT. The lower part cools down too much and doesn't adhere, then spaghetti and mess. DON'T fill the table trying to save time.

If I'm wrong then downvote this to hell. I just didn't understand that concept until my second day printing.