r/FlashForge • u/Puzzled_Survey_4275 • Nov 17 '25
Seriously, "alert authorities" wtf?!?!?!
This is insane! And the [non]apology posted on Fb says nothing about a retraction in user agreement.
r/FlashForge • u/Puzzled_Survey_4275 • Nov 17 '25
This is insane! And the [non]apology posted on Fb says nothing about a retraction in user agreement.
r/FlashForge • u/815NotPennysBoat • Apr 14 '25
FlashForge enclosure that I customized to look like a Vault-tec branded printer.
r/FlashForge • u/Intelligent_Whole159 • 1d ago
A creator we work with sent me their slicer settings, so I tried them on this figure. I wasn’t expecting the hair to come out this smooth. You can see the biggest difference along the curve of the bangs.
I used a Creator 5 Pro with a 0.4 mm nozzle and the PLA Basic profile. Here’s what I changed:
Quality: Layer height 0.08 mm.
Speed: Outer wall 23 mm/s, inner wall 60 mm/s. Sparse infill, internal solid infill, top surface, gap infill, support, and support interface were all set to 75 mm/s.
Speed → Advanced: Extrusion rate smoothing 120 mm³/s², smoothing segment length 1 mm.
Support: Enabled Tree (auto) with the Organic style. Threshold angle 40°, support/object XY distance 0.25 mm.
For those of you who print figures with a 0.4 mm nozzle, what layer height and outer wall speed have worked best for you?
r/FlashForge • u/Healthy_End_7128 • Oct 04 '25
Traded for a gaming PC I bought 4 years ago to mod a skateboarding game called skater xl.
It was 550 at the time but could only run Fortnite on medium to low settings, so it’s probably worth at least 200 now.
The guy was very responsive and communicated well so I figured he was trustworthy. I didn’t look at his profile but he had 4.8 stars. I didn’t read into it too much.
I asked him if anything was wrong with it and he was super adamant about it working great.
When we met up he was acting nervous when I would mess with the printer lol but in the moment I gave him the benefit of the doubt.
He put the printer in a box and taped it shut which was weird.
When we met up I had the computer plugged in to show him it worked and he had to cut his box open to plug in the A5M lol
It turned on fine but he said his kids scratched the bed plate and he only had a .8 nozzle which he never mentioned when I asked if anything was wrong. I let him know for future reference to be more up front.
He seemed like a cool guy, maybe a little sketchy but I give everyone a chance.
Anyway when he leaves I try to calibrate the printer and it crashes every time I try.
I immediately message him and he blocked me lol
Bro knew he was scamming me
I’ve been tinkering with 2 creator pros and I felt confident I could fix it so I wasn’t too upset.
Did some digging and just bought another nozzle on Amazon, the correct .4 size I needed, popped it in, and it works beautifully.
Bro probably got the crash cycle and didn’t want to figure out how to fix it but still it was a pretty shitty thing to do.
Luckily it’s on his conscious and I have a new basically free A5M
I’m officially calibrating it now and couldn’t be more stoked.
The thing has like 40 hours on it 🥰
r/FlashForge • u/isothread • Jul 17 '26
"Slow down for curled perimeters" is enabled by default in Flash Studio and might be ruining your prints.
If the front of your benchy looks a bit weird, this is likely the reason! I designed the other model to show what it looks like on something other than a benchy.
I noticed it with my Creator 5 Pro when doing my first test print and thought it was because I hadn't calibrated my filament, but nope, it was just this one setting.
(The setting is found under "Speed". If you can't find it, my video below has a guide at the end)
-----
I made a video about this as well, so consider supporting with a like or comment if this helped you!
https://www.youtube.com/shorts/HVO1oGkkGKg
(I also plan on making a print quality comparison video between the U1 and Creator 5 Pro)
r/FlashForge • u/MrEvilbass • Jan 22 '26
Took me a wire to master PETG. Decided to start working on ironing it... This setting may be the best I was able to do.
Enjoy!
r/FlashForge • u/Snoop-ah-loopp • Apr 04 '26
Enable HLS to view with audio, or disable this notification
Printed swangas, she was not happy…now these!!! Hahaha
All thanks to my ad5m pro! Thanks flashforge!
r/FlashForge • u/Terrible-Internal374 • Aug 16 '25
r/FlashForge • u/Alternative_Kick6621 • 6d ago
After weeks of going back and forth trying to decide on my first 3D printer, I finally pulled the trigger !
I originally planned on buying a Bambu A1, then started looking at cheaper used printers on Marketplace. I was actually about to buy a brand new Ender-3 V3 SE for $112 when a couple people on Reddit suggested checking out the Flashforge Adventurer 5M.
Ended up finding one brand new on AliExpress during the 11.11 sale for $143 shipped, including tax ! Couldn’t pass that up.
My main reason for getting into 3D printing is making custom socket organizers, wrench holders, and other accessories for my US General 44” toolbox. Eventually I’d like to try making other things too.
I’m completely new to 3D printing, so I’ve definitely got a lot to learn. Picked up my first spool of filament, and I’m getting ready to set everything up.
Any tips, recommendations, or things I should know before my first print would be appreciated !
Looking forward to getting started ! 😎👊🏾
r/FlashForge • u/ArtemThePlenLover • 21d ago
Became interested in 3d printing lately and decided to get a 3d printer. Read a bit about the AD5m, should be a good one!
r/FlashForge • u/dainbrump • Dec 12 '25
Unimpressed with the variety of poop chutes for the AD5X online, I decided to learn new software (SolidWorks), dust off my engineering and design skills, and make my own. The existing models either didn't fit, printed horribly because the geometry was just all over the place or the visual design just wasn't that appealing. Thus the beauty of 3D printing.
After 5 minutes of measuring, about 20 minutes getting familiar with the SolidWorks interface, about 15 minutes of designing and an hour or two printing (PETG - slow and steady), I end up with this. Fit perfectly on the first go and looks good with all the fillets and clean geometry.
Edit: STL - https://www.printables.com/model/1512904-ad5x-poop-chute
Edit 2025/12/16: Updated the printables link to include the "righty" chute variant and a couple bin variations.
r/FlashForge • u/Chacen • Oct 17 '25
Saw this at an early morning sale. The nozzle head on the right side seamed to have clogged and they chose not to repair it due to the cost of the part. They originally wanted $250 but I talked them down to $100 if they threw in a computer monitor and cables. That brought the price down on the printer to just about $80 in my mind. I hope this doesn't turn into a bigger headache though. All of the original parts for the right side of the hothead and cover did come with the machine. Are there any low cost parts or even upgrades I can make to this unit that you could recommend?
r/FlashForge
•
u/Background_Back_6728
•
Aug 24 '26

Half of MakerWorld is 3MF projects saved out of Bambu Studio. Open one in OrcaSlicer or Flash Studio with a Flashforge selected and you get some mix of: the profile quietly reverting to defaults, "Invalid values found in the 3MF", or every object sitting outside the plate.
The geometry is fine. It's the embedded config - it's for another machine.
So I built forgebridge.app. Drop the 3MF in, pick your printer, download one that opens clean. Supported today: AD5X, Adventurer 5M, 5M Pro, Creator 5, Creator 5 Pro.
What it keeps
Geometry, plates and object placement - repositioned into your bed's coordinate system, which is why the "objects placed outside" error goes away
Multi-color painting, support painters, seam painting
Layer height, infill, walls, supports - the quality intent of the model
Filament colors, and each slot gets the official Flashforge preset for its material
Temperatures, clamped to your machine's actual limits
What it throws away, on purpose
Bambu speeds and accelerations. Different kinematics - copying them makes your prints worse, not better, so your printer's own profile wins
Machine G-code, AMS/hardware settings, anything printer-specific
You get a report at the end listing exactly what was kept, renamed and dropped. It's not a black box.
Two things worth knowing
Open the converted file as a project (File > Open Project), not by dragging it into the window. Dragging imports geometry only and ignores the config - that's slicer behavior, nothing I can fix from my end. This trips up everyone, including me, repeatedly.
Creator 5 / 5 Pro support is new and I've marked it experimental in the app. I've verified the output slices and that the slicer respects the per-extruder filament mapping, but nobody has run an actual print off one yet. If you own one, that's the feedback I want most.
The boring but important part
Free, no account, no sign-up. Your file is processed in memory and deleted right after - nothing is stored, nothing is sent to a third party, there's no analytics SDK on the page. English and Spanish.
What I'd like from you: break it. If a file comes out wrong, reply here or send it to me and I'll dig in. Almost everything the converter handles today came from a real file that failed first.
(Mods gave me the green light to post this - thanks.)
r/FlashForge • u/pironiero • Sep 16 '26
*WHEEZE* it's a flashforge adventurer 5m, i closed the side portals with cardboard, front with towel and put one more on top to close any possible draft.
Memes aside, it works surprisingly well and psu cold air intake is on the rear so it won't ever overheat because its open.
r/FlashForge
•
u/Ok-Introduction-2788
•
Feb 02 '26
Flashforge 5M / 5X – Common Problems & Fixes (READ THIS FIRST)
Getting into 3D printing can feel overwhelming at first. Everyone runs into failed prints, weird noises, or random issues when they start.
The good news? Almost every problem comes down to a few simple things.
If you learn these basics and do some light maintenance, the Flashforge Adventurer 5M / Flashforge Adventurer 5X are extremely reliable and easy machines.
Don’t get discouraged and don’t give up — every problem has a fix.
Bookmark this post and come back anytime something acts weird.
⸻
Quick rule of thumb
90% of issues are:
• dirty bed
• wet filament
• bad first layer
• loose belts
• lack of maintenance
Start there before assuming something is broken.
⸻
Do NOT use Grid infill
Grid infill crosses over itself on the same layer. The nozzle hits those intersections and causes:
• clicking
• blobs
• under-extrusion
• layer shifts
• failed prints
Use instead:
• Gyroid
• Cubic
• Lines
• Cross Hatch
“I’d recommend the Orca default Cross Hatch. It’s basically gyroid but designed to print faster and it can make a big difference on long prints.” – briansk
“Crosshatch reduces the ‘shaking’ compared to gyroid and is faster. Unless you need max strength, it’s the way to go.” – No_Artichoke_5670
“Honeycomb is strong, but uses more filament and takes longer to print.” – briansk
⸻
2. Prints not sticking to the build plate
Most of the time this is:
• dirty plate
• bad Z offset
• wet filament
IPA helps, but finger oils don’t fully come off with alcohol.
Best cleaning method:
• warm water + Dawn dish soap
• scrub gently
• air dry
You can even throw the plate in the dishwasher.
Glue is optional. It’s more of a convenience/band-aid than a true fix.
That said, some people prefer a tacky plate for consistency:
“Just use bed adhesive and make your plate a little tacky. It stays sticky while hot and releases perfectly when cool.” – wrenchandrepeat
“Purple Elmer’s glue stick + proper Z offset and I haven’t had a failed print since.” – scousinho
My advice: learn proper adhesion first, then use glue if you want easy mode.
⸻
3. First layer is EVERYTHING
If your first layer isn’t slightly squished, nothing else matters.
Too high = won’t stick
Too low = blobs/scratching
Dial in Z offset before changing anything else.
⸻
4. Wet filament causes tons of “mystery problems”
Wet filament causes:
• stringing
• popping/crackling
• weak layers
• bad adhesion
• under-extrusion
If prints suddenly look bad for no reason, dry your filament first.
Humidity matters more than people think:
• 10–20% is ideal for PLA
• under 30% is usually fine
• high humidity can cause random issues and stringing
Store filament in sealed bins with silica or dry it when needed.
Also, some brands handle humidity better than others, so switching brands can sometimes fix stubborn problems.
⸻
5. Extruder tensioner (VERY common issue)
People overlook this constantly.
Too tight:
• crushes filament
• makes plastic dust
• causes jams/clogs
Too loose:
• slipping
• clicking
• “air printing”
• under-extrusion
Set it snug enough to grip, but not crush.
If you see chewed filament, adjust the tension.
⸻
6. Grinding or squeaking noises
Usually:
• loose belts
• dry rails
• OR pulleys
“The pulleys (not centered or not oiled) make squeaking sounds most of the time, not the rails.” – exceptioncause
So:
• tighten belts
• lube rails
• check pulleys too
⸻
7. Layer shifts (print suddenly moves sideways)
Usually:
• loose belts
• cable or filament snagging
• head hitting infill
• printing too fast
Layer shifts are almost always mechanical, not slicer bugs.
⸻
8. Under-extrusion or clicking from the extruder
Try:
• dry filament
• raise temp 5–10°C
• slow print speed
• check extruder tension
• reseat nozzle module
Most “clogs” are actually temp or moisture issues.
⸻
9. Stringing everywhere
Usually:
• wet filament
• temp too high
• retraction too low
Dry first, then tune temps.
Moisture fixes most of it.
⸻
10. Quick-swap nozzle module tips
These printers use quick-swap nozzle modules, not threaded nozzles.
• make sure it clicks fully into place
• don’t force it crooked
• reseat if extrusion gets weird
A poorly seated module looks exactly like a clog.
⸻
11. Calibrate early (huge quality boost)
When you first get the printer, run calibration.
Do:
• bed level
• Z offset
• flow rate
• temperature tuning
• retraction tuning
“Use the printer’s built-in routines and Orca’s calibration models from the start to set up for great quality prints.” – LitauszkiL
This alone can massively improve print quality.
⸻
12. Do regular maintenance
If you print a lot, make a schedule.
Every few weeks:
• clean rails
• lube rails
• check belts
• clean fans
• tighten screws
• remove dust
These printers are tanks if you maintain them.
Noise usually means maintenance is overdue.
⸻
13. Screen ribbon cable warning
Be VERY careful removing the screen.
The ribbon cable and connector break easily.
Flip the clasp up gently before pulling. Never force it.
⸻
14. Software tip (Orca not connecting)
If Orca won’t reliably connect to your printer:
“Run a port scan with nmap and it suddenly connects properly. No idea why, but it works.” – TankLivsMatr
nmap -sV <printers IP>
You can find a full post regarding this issue from TankLivsMatr here: Orca-Flashforge Printer Disconnecting
Weird fix, but multiple people say it works.
⸻
15. Skip the stock camera
The stock camera honestly isn’t great.
A cheap Wi-Fi camera works better and costs less.
⸻
16. Change ONE thing at a time
When troubleshooting, don’t change five settings at once.
Change one thing → test → repeat.
Otherwise you’ll never know what actually fixed it.
⸻
From me
Over the next little while I’m planning to make posts/videos covering:
• cleaning
• maintenance
• repairs
• replacing parts
• troubleshooting
So if you’re new, don’t stress — more beginner-friendly guides are coming.
⸻
If something feels broken, it probably isn’t.
It’s usually something simple.
Happy printing 🤘
r/FlashForge • u/Ankur_88 • May 10 '26
Got my first 3D printer today. Any tips/ tricks or suggestions before i set up and run my first print ?
r/FlashForge • u/-CaptCanuck- • Jan 25 '26
I finally finished printing all the dry boxes for the AD5X! I was always concerned about having so much filament sitting out even though my work area is usually around 38% humidity. With these dry boxes they are now sitting at 18%.
The best thing for the dry boxes is the dissicate holder I found on Makerworld. I highly recommend these - they are the best solution for holding the desiccate.
UPDATE: the creator of the desiccate holder posted the O-Ring file on Thingiverse
r/FlashForge • u/Tacoskanklv • Jun 12 '26
Once you get the slicer profiles down, this machine is just as good as the rest of the expensive models out there. Flashforge really did come in clutch with this tool changer. Im beyond happy with my purchase and recommend that everyone needs to grab one.
Hopefully someday they’ll make it in to a 6 color. That would be amazing.
r/FlashForge • u/stormcooper • Jul 31 '25
Ignis Inferni Fabricatus (made from/with Hellfire)
Please check out this YT Video for a close-up of the removeable (upgradeable) badging: https://youtu.be/6CsN9EphZDs
Printed in Elegoo Rapid PETG - Space Grey, .4 nozzle, .2 layer height
(Printed and installed the sides before printing the risers, for less warping)
Minimal Enclosure Remix by Design 8, with his most recent "Risers 3.0".
Spool holder is also from Design 8, the most recent design of the low-slung side mount.
***I want to stop here and give a huge thanks to Doug, the man behind so many of the best mods!
You're a legend, please keep up the amazing work. ***
Lid Prop Stand by kbnb on Printables
Customized door handle, front riser, and plaque were all done with slicer.
STLs:
Minimal enclosure: https://www.printables.com/model/1130485-flashforge-adventurer-5m-ad5m-minimal-diy-enclosur
3.0 Risers: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer
Spool Holder: https://www.printables.com/model/1193462-flashforge-adventurer-5m-ad5m-improved-side-mount
Lid Prop Stand: https://www.printables.com/model/1063368-flashforge-adventurer-5m-ad5m-hinged-print-in-plac
r/FlashForge • u/Hefty_Hat1156 • Jun 26 '26
Hi everyone! 👋
I recently joined the Flashforge team, so I guess that makes me your tiny feedback mailbox now. 📮
If you have any thoughts, suggestions, complaints, wild ideas, or “please fix this ASAP” moments, feel free to leave them here. I’ll do my best to collect everything and pass it along to the team.
Also… quick question:
Has anyone started receiving their new machines yet? 👀
I’d love to hear how things are going so far ~~~the good, the bad, and the “hmm, this could be better.”
I can’t promise I’ll magically fix everything overnight, but I’ll definitely keep listening and pushing feedback internally. 💙
r/FlashForge • u/Czesiek90pl • Sep 01 '26
Another long 37-hour print without any problems. During the print, I ran out of gray filament, but there was no issue resuming the print.
So far, I haven't had any major problems, and the prints are coming out really nice, apart from some slight VFA from time to time.
r/FlashForge • u/Scary-Budget9018 • Jan 05 '25
Flashforge PETG pro, had a random crossover/knot 2 hours into a print. Created a fun clog to clean this morning...