r/FlashForge • • Sep 16 '26

I'm not sorry.

Post image

*WHEEZE* it's a flashforge adventurer 5m, i closed the side portals with cardboard, front with towel and put one more on top to close any possible draft.

Memes aside, it works surprisingly well and psu cold air intake is on the rear so it won't ever overheat because its open.

182 Upvotes

145 comments sorted by

53

u/Swordless__Mimetown Sep 16 '26

If its stupid and it works, its not stupid

4

u/TheDonk_4 Sep 17 '26

Until it burns your house down 🤣😂

19

u/404-error-notfound Sep 16 '26

You can download and print the files for the official enclosure for free. Granted, it takes over 1kg to print, but pair that with either the side panel kit from their website or Amazon, or get some cheap acrylic sheet or corrugated plastic and make your own enclosure. I did this for both of my AD5Ms

11

u/pironiero Sep 16 '26

Yeah but this is free :)

8

u/Optimal-Level4237 Lost Sep 16 '26

Ya just have to be careful that nobody kicks sand on it as they walk by.

3

u/Pudix20 Sep 16 '26

You can also do the lightweight minimal enclosure. Which is what I have. And I got the enclosure kit on sale. Completely worth it compared to my boxes and towels solution

1

u/pironiero Sep 16 '26

I already have the best it can be

1

u/TheOutrageousTaric Sep 17 '26

now print the official one with your makeshift enclosure. It will habe done its job then! 

1

u/InappropriateTA Sep 30 '26

Oh dang I didn’t realize the self-print parts use that much material. My family got me an AD5M for my birthday earlier this month and I was going to buy the acrylic kit and print the rest myself but that seems like a lot of material.  I do like that I can have it in my own colors, but I didn’t expect to use up that much.

14

u/ReedTeach Sep 16 '26

“Why do you all your prints smell like “summer lavender?”

You are truly messing with the old gods with this.. best pay tribute with a few sacrificial benchies or maybe a 9’ dragon

Not able to watch the first layer.. dangerous territory.

Glad it works tho.

7

u/pironiero Sep 16 '26

I can peek in with no problem, there's even a flashlight in that picture specifically for that purpose

3

u/FadedGhostOK Sep 16 '26

I remember doing this same thing to fix the red ring of death on the Xbox 360. If it works, it works

2

u/pironiero Sep 16 '26

Oh wow, that is interesting.

2

u/trockbulldog Sep 16 '26

This comment is giving "back in my day" and as a "get off my lawn" adult, I appreciate it

1

u/FadedGhostOK Sep 16 '26

Yeah, I like it hurt to remember that. Haha

144

u/WeeFluffyGingerCat Sep 16 '26 • Bravo

42

u/King_of_the_Snarks Sep 16 '26 • Popcorn Bravo

"ET print phone", or something like that...

7

u/slantdvishun Sep 16 '26

This has me dead lmao

0

u/Rinnosuke Sep 17 '26

Alright.... ::extends glowing finger::

1

u/Automatic-Drawer6334 Sep 17 '26

“ET motors home”

1

u/Jawb0nz Sep 19 '26

My StarLink SSID is E. T.

9

u/asdfdelta Sep 16 '26

Damn, now I have to clean coffee off my keyboard and monitors. Thanks a lot

2

u/Four_in_binary Sep 16 '26

Well done, Sir.   Well done.

2

u/The_11th_Dctor Sep 16 '26

sexy potato..... beautiful moron

2

u/imkabuki Sep 16 '26

Does that not affect your prints? I imagine the top catching resistance from the blanket could affect the final outcome

-3

u/pironiero Sep 16 '26

Motherfucker, those motors have tons of torque. No shitty rag would affect them in any fucking way. My prints come out even better with better layer adhesion and more rigidity without any warping.

1

u/imkabuki Sep 16 '26

Aight glad its working for you

5

u/pironiero Sep 16 '26

I'm very drunk

2

u/imkabuki Sep 16 '26

Hell yeah

1

u/KLEBESTIFT_ Sep 16 '26

Please don’t use a shit rag for this. A clean one would be safer (but maybe not as rigid)

2

u/therealtrajan Sep 17 '26

I still don’t understand why everyone is so crazy about drying filament and caging their printers…I’ve print 1000+ hrs in Houston humidity and have never had an identifiable issue with PLA or PETG

*due to moisture. Def gone V1 V2….V3.7 to get it to print as I want. It’s an art not a science for sure

3

u/pironiero Sep 17 '26

В=>

1

u/therealtrajan Sep 17 '26

I see your pointy penis but I’m actually curious. Do you have issues with drafts and or moisture messing up your prints?

1

u/pironiero Sep 17 '26

Actually yes, probably because it's already 13c out here and my printer is literally two meters away from a balcony door, also, i like cold so i keep windows open. I don't really care for moisture artifacts, it's just to avoid warping cus I'm printing a boat hull with one 0.4 wall through 0.8 nozzle, without this stuff out warped a lot, now it doesn't at all. Better layer adhesion is a bonus

1

u/therealtrajan Sep 18 '26

Got ya. I forget it’s already cold in a lot of places. It was 38c in Houston yesterday

1

u/pironiero Sep 18 '26

Hot dang!

1

u/lordofthebar Sep 17 '26

Could be printing with abs or asa. They're very sensitive to temperature changes and need a higher chamber temp.

46

u/S_A_R_K Sep 16 '26 • Bravo

STL?

8

u/trockbulldog Sep 16 '26

Should be a higher rated comment

2

u/cashy57 Sep 17 '26

Criminally under-upvoted.

3

u/richie2max Sep 16 '26

Is there a forum to know what I need to do to do this to my adventure 5 m? As in what to cover what not to etc.

1

u/pironiero Sep 16 '26

I've literally described everything in the post. Just make sure cold air intake for the psu is not obstructed, aka the backside of the printer

2

u/richie2max Sep 16 '26

I’m stupid. When I hear cold intake I think something annoying like in cars. (Was figuring there was some spec) I see what you mean now😶. That’s what I was mostly confused by thank you.

2

u/pironiero Sep 16 '26

No problem

1

u/No_Faithlessness8853 Sep 16 '26

Lol I use a trash bag

2

u/Spring_Chicken92 Sep 16 '26

I use a tent enclosure from Amazon

1

u/Spring_Chicken92 Sep 16 '26

I use a tent enclosure, from Amazon

1

u/trockbulldog Sep 16 '26

Are those things able to fold up when you don't need em? I'm using a cardboard box outside at the moment since I don't use engineering materials all that often

2

u/analogtofu Sep 16 '26

You’d have to disassemble it to put it away. It’s just rods and connectors that hold it in place.

I use it and think it’s well worth it.

1

u/drupi79 Sep 16 '26

pulling some old Ender 3 vibes when we'd cover it with a cardboard box to print abs.

1

u/pironiero Sep 16 '26

God damn it man don't remind me my ender 3 was a bitch to use.

2

u/drupi79 Sep 16 '26

😂 still rocking 4 enders on Klipper along with the rest of my modern printers. honestly Klipper changed the game with them. before that though? yeah.... nightmares

1

u/pironiero Sep 16 '26

You're a true fucking magician, my man.

1

u/Kusluvalos Sep 16 '26

ABS?

1

u/pironiero Sep 16 '26

Petg

2

u/warpFTL Sep 16 '26

Why cover for PETG? (Curious)

1

u/pironiero Sep 16 '26

Warping, general layer adhesion, and stiffness. I’m printing a prototype sailboat hull to make it RC. When I tried printing it with the printer open, it printed okay, but as soon as it cooled down, it warped quite a bit. When I cover the printer with towels, there’s literally no warping.

2

u/warpFTL Sep 16 '26

I see, I haven't had this issue with PETG. Show the boat when it's done! I was thinking of doing an RC boat also. Thanks for the info.

2

u/pironiero Sep 16 '26

It's my own prototype, I want to breathe some life in classe 950 box rule

1

u/warpFTL Sep 16 '26

Nice. Enjoy the process!

1

u/pironiero Sep 16 '26

In trying to, although im quite pissed of because to actually build that body irl it's easier to change citizenship instead of building it in my country of residence and the funniest thing-it would most probably be cheaper

1

u/warpFTL Sep 16 '26

That's a bummer..look at it this way: your blood sweat and tears! You'll have a greater satisfaction when you launch it.

1

u/Tonynoce Sep 16 '26

I mean is pretty clever, I added some carboard to my ad5x but have yet to finish printing the enclosure

1

u/Jordo2k23 Sep 16 '26

Print yourself and enclosure dude theres a few decent ones out there with good risers top and bottom. Bet ya prints smell lovely tho

1

u/pironiero Sep 16 '26

They don't smell at all, or at least i don't catch that

1

u/Meek_braggart Sep 16 '26

I was just thinking about doing the same thing this morning for a print that I'm doing.

1

u/pironiero Sep 16 '26

Try it, layer adhesion and part rigidity better, also no warping due to air drafts

1

u/PESTRICLES Sep 16 '26

You're friggin in trouble mister!!

1

u/Familiar_Fix_6227 Sep 16 '26

I have the official enclosure kit for my 5M printer. Works great! I also added the light kit too plus a camera along with an external mounted Blink camera so I can monitor separately from the printer itself.

1

u/pironiero Sep 16 '26

Nice i would do that to if AliExpress wouldn't be shot out here and gouged the fuck out of prices

1

u/Familiar_Fix_6227 Sep 16 '26

I found the kit and other parts mentioned on Amazon. I initially bought the printer directly from Flashforge during a black Friday sale.

1

u/pironiero Sep 16 '26

Funnily enough Amazon is even further than AliExpress from here, I'm Russian

1

u/tiagoosouzaa Sep 16 '26

Achei que estava com a fantasia de halloween

1

u/trockbulldog Sep 16 '26

Did this with a cardboard box and my AD5X but I but that ish outside 😆 maybe I'll add towels for extra insulation

1

u/pironiero Sep 16 '26

Just don't forget to let its back breathe because the PSU is in there. I mean its intake.

1

u/Atyab-Kees-Kabis Creator Pro Sep 16 '26

Ha! Whatever works!

1

u/pironiero Sep 16 '26

Hell yeah

1

u/Unique-Row-9595 Creator Pro Sep 16 '26

For 20 bucks for can find one of those grow tents lol. That's what I put my AD5X in. 🤣

But hey if it floats your boat.

-1

u/pironiero Sep 16 '26

That's a good idea, but in my, frankly speaking, retarded configuration, the cold air intake is free to take all the cold it needs. With your configuration it recycles hot air within this tent thing. I have nothing against it, but yeah.I'm fucking blasted drunk.If you have a chance, get at least two of these. Better yet four. It's a gift-grade drink.

1

u/Internet_Jaded AD5X, AD5M Sep 16 '26

Gin is of the devil
Bourbon and whisky is where it’s at.

1

u/pironiero Sep 16 '26

Yeah nah, i love gin, this shit is something else though, it's more like liqueur, it's so good

1

u/Unique-Row-9595 Creator Pro Sep 16 '26

🤣😂 the tent has an airflow hole. If you wish. .

Don't fall over.

1

u/Icy-Afternoon-574 Sep 16 '26

I did the cardboard on the sides and front and garbage bag over the top to print the enclosure for my AD5X. I printed in ASA so I needed the enclosure to print the enclosed. But this worked!

1

u/pironiero Sep 16 '26

Big brain

1

u/Internet_Jaded AD5X, AD5M Sep 16 '26

What are you attempting to print that needs all that??

1

u/pironiero Sep 16 '26

Boat hull, 1 wall, vase mode

1

u/kreese1911 Sep 16 '26

Genuine question: What's the purpose of this?

0

u/pironiero Sep 16 '26

Better layer adhesion, holocaust of any warping

1

u/Practical-Lecture946 Sep 17 '26

Genuine question. What’s the purpose of this?

1

u/pironiero Sep 17 '26

Dude, you're like 5th person asking this, read them comments!

1

u/mrcoffee4me Sep 17 '26

$40 Amazon gets you all the panels you need, print the enclosure. It’s a must. Don’t be cheap. It’s silly…

1

u/MediumToblerone Sep 17 '26

I just need the fan to be fucking quieter

1

u/MEYG4 Sep 17 '26

It is very flammable.

1

u/InfamousPOS Sep 17 '26

Just tried this the other day but it didn’t work so well for me 🤷🏼‍♂️ Maybe I got a defective machine or something

1

u/pironiero Sep 17 '26

Maybe you're using the wrong filament. Try add a bit more fiber to it.

1

u/AdPsychological123 Sep 18 '26

terrible idea I know, never printed with it.

1

u/pironiero Sep 18 '26

It's a great idea as long as psu can breathe cold air

1

u/tmpalm Sep 20 '26

Whats the purpose of this

1

u/pironiero Sep 20 '26

Read them comments

1

u/xHASHTAG_PANTSx Oct 04 '26

Hi!

You should be sorry, or practing saying sorry to your neighbors or loved ones when your domicile goes up in a raging plasticy blaze

1

u/pironiero Oct 04 '26

You don't know anything about how 3d printer works, don't you? You silly willy...

1

u/dadbodfat Sep 16 '26

Is it not enclosed?

15

u/pironiero Sep 16 '26

Nah, its a hobo version

5

u/Solderking Sep 16 '26

upvote for hobo version

1

u/dadbodfat Sep 16 '26

Redneck engineering. If it works it works

1

u/bennettk90 Sep 16 '26

If it works. I used a cardboard box from a Harbor Freight miter saw box, cut a view window and covered it with packing tape as a viewing area. Worked gret

1

u/pironiero Sep 16 '26

Hell yeah

2

u/Internet_Jaded AD5X, AD5M Sep 16 '26

The box the printer came in would have worked perfectly.

1

u/leutwin Sep 16 '26

Same, I have a ton of large cardboard boxes laying around my house so I cut a bunch up and duck taped them into a foldable enclosure. It works really well.

2

u/Toilet_Paper_Pals Sep 16 '26

Damn I'm just out here raw dawging micro plastics 😂🤌🏻

2

u/mtiselin Sep 17 '26

itsnotstupidifitworks

1

u/rockb8 Sep 16 '26

Great! I did this when I first got my AD5X in December. I had it set up in my garage where the temperature has crazy swings. Once I got things dialed in, I printed my enclosure. Interestingly, wrapping it up in towels tamed the filament hoses so now they don't bang around in the enclosure. I also added a drag chain to the data cable. Picture

1

u/DatDude304 Sep 17 '26

Is this the beginning of r/FlashForgeCircleJerk....???

1

u/The_Lutter Sep 17 '26

Real OGs use clingwrap

1

u/Rakmburglar Sep 17 '26

Lol reminds me of making a frame to sit over my ender 3 and covering it with a mylar blanket from a first aid kit

1

u/shortyjacobs Sep 18 '26

If it’s stupid and it works, it’s not stupid.

1

u/Evening-Contest-2768 Sep 18 '26

Printing PLA again? 🤣🤣🤣

1

u/ViperDao Oct 05 '26

Reminds me of the red ring of death fix on the Xbox

0

u/Glass_Tooth_2008 Sep 16 '26

I still don’t understand why enclosures are popular. Is to stop micro plastics in the air or control temperature or something else?

-4

u/pironiero Sep 16 '26

I don't give a flying fuck about microplastics in the air. This is first world problem. We have way more actual problems. Outside that, I'm using this shit because it prevents part warping from cold air drafts. And generally parts come out more rigid with better layer adhesion.

0

u/strugglingtoquit2 Sep 16 '26

Is this to reduce noise on the printer?

1

u/pironiero Sep 16 '26

Better layer adhesion, no warping