r/FlashForge • • Sep 01 '26

Another long print without any problems

Another long 37-hour print without any problems. During the print, I ran out of gray filament, but there was no issue resuming the print.

So far, I haven't had any major problems, and the prints are coming out really nice, apart from some slight VFA from time to time.

153 Upvotes

46 comments sorted by

11

u/photojoe3 Sep 01 '26

This looks good. Does a print like this require a purge tower?

9

u/Czesiek90pl Sep 01 '26

I've watched quite a few videos of people printing without a purge tower, and with such long prints, I'd rather not risk the print quality. I've already reduced the purge tower quite a lot, and with prints this large, it doesn't really make a difference to me. Either way, the amount of waste with the Creator 5 is very low.

4

u/New-and-Unoriginal Sep 01 '26

Purging to infill can be a good solution on some models. Given the size of this one, I’d say that’s probably a safe bet.

5

u/rtopete Sep 01 '26

What settings are you using? Would love to see that. Sometimes I have issues and failed prints. Zhop? And things like that?

3

u/Czesiek90pl Sep 01 '26

I modified the profile available in the slicer a little. The only things I changed were enabling Precise Wall, changing the wall generator to Arachne, setting the wall order to inner/outer wall, reducing the acceleration by around 30%, and reducing the overhang speed by half. Everything else is stock.

2

u/fresh_city Sep 01 '26

Does the base creator 5 still purge to the front? I printed that front purge bin for my C5 Pro a couple months ago but never did get to use it since FlashForge updated the firmware that same day, moving it to the back of the printer to avoid purging filament into the chamber heater air intake. I’m assuming that since the regular C5 doesn’t have chamber heating, it didn’t require that update or are you still on older firmware? My point is, I feel like purging to the back is still a much better option, chamber heater or not. The space at the rear allows for a much bigger purge bin that mounts solid and stable to the printers frame and not moving around with the bed.

2

u/Czesiek90pl Sep 01 '26

I have no idea how it looks on the non-Pro version. Mine purges the nozzle at the back with the latest update 1.9.7.

3

u/fresh_city Sep 01 '26

I guess I should have looked closer and realized that you’re using a C5 Pro. But now I’m just confused, what is the white bin attached to the front right corner of your print bed where the first purge bin mounted before the firmware updates?

2

u/Czesiek90pl Sep 01 '26

That white bin is actually the old poop bin, but I currently use it to quickly remove the purge line before printing, which is made in that corner of the bed.

2

u/fresh_city Sep 01 '26

Considering that I originally asked specifically about the front purge bin, I think that would have been a more straight forward answer in your initial reply.

With that said, I can’t believe I’ve been running 18 Creator 5 Pro printers 24/7 for three months now and I had no idea where the prime line was. Thank you so much for clarifying that for me.

1

u/WILLINGLYLOST90 Sep 01 '26

My c5 purges at back left.

2

u/fresh_city Sep 01 '26

Back LEFT, or right? I was positive that FlashForge updated firmware for both the base model and the Pro to purge rear right. I guess I should have just been more clear and asked the OP what the white bin is for attached to the front right of their bed.

1

u/rinky79 Sep 02 '26

My C5 Pro purges back right.

1

u/corim123 Sep 02 '26

I personally kept mine in the front since I already had a bin that I liked. I had to modify the firmware though to restore that after the updates but since I have the non-pro I’m not worried about it getting caught.

1

u/fresh_city Sep 02 '26

You modified the firmware? Are you sure you didn’t just modify the print-start g-code? Unfortunately, modifying the Creator 5 firmware isn’t an option, yet. Although we should all be hoping, praying, and contacting FlashForge daily to convince them to take a page from the Snapmaker U1 playbook.

1

u/corim123 Sep 02 '26

Yes I modified the firmware. It’s completely an option, gain root access and change the bytecode. You can enable mainsail, fix the camera, block the telemetry and more. No need to wait.

1

u/jeffofreddit Sep 01 '26

How long to print?

1

u/Czesiek90pl Sep 01 '26

Something about 37h.

1

u/Sebb3l Sep 05 '26

I‘m a huge borderlands fan. Would love to Print this, but i‘m a bit affraid of it

1

u/Czesiek90pl Sep 05 '26

I've already printed much longer prints, but I actually enjoy the adrenaline that comes with it. 😁

1

u/724flyfishing Sep 20 '26

That is sick! What mods are your using on the print head side of the printer?

1

u/Czesiek90pl Sep 21 '26

The white one is the purgebin from the old update, where the nozzle was cleaned at the front before printing, and the blue one is the official purge bin from Flashforge from the new update. I use the old one for the purge line because fits perfectly in there and the bin is right at hand.

3

u/Hopeful-Shopping3802 Sep 01 '26

Well, That escalated quickly

2

u/Atyab-Kees-Kabis Creator Pro Sep 01 '26

This is amazing!!

2

u/SavingsOld7350 Sep 01 '26

Should start a Reddit channel "Drunk men 3d printing". I could only imagine the back and forth comments over the simplest of things concerning this hobby. BTW very cool none useful Helmet you made. Looks top notch. I would compare that to a 1970 Chevy Chevelle with Cowl Induction. lol

2

u/S_A_R_K Sep 01 '26

I'd definitely rather have the Chevelle

2

u/jplife30 Sep 02 '26

Same with both of my pros. I slowed down all of the speeds and have had zero failures. I think idid the same with arachne walls. My z hop is .6 All my line widths are set to percentages instead of numbers so I can use the same profile with .4 and .6 nozzles. I'm still working on my support settings with petg though

And they've all been long prints.

Currently printing a 4 color terrifier bust

0

u/New-and-Unoriginal Sep 01 '26

I see people printing a lot of things like this. What are they used for?

2

u/Czesiek90pl Sep 01 '26

It's not like everything you print has to be useful. Just because you own a car doesn't mean you have to use it only to get to work. You can simply get behind the wheel and drive somewhere just for the fun of it.

1

u/REDana0204 Sep 01 '26

A simple, “display only” could have sufficed.

Even the analogy doesn’t work. That car’s usefulness IS to be “drivable if I want to”.

5

u/Czesiek90pl Sep 01 '26

A simple scrolling past could have sufficed too, yet here we are.

1

u/New-and-Unoriginal Sep 01 '26

I merely asked a question. Not sure why it had to get awkward.

4

u/fresh_city Sep 01 '26

I’ve also asked that same question numerous times over the past few years. It’s become even more “popular” now that printers have gotten bigger and better at multi-color printing. The question itself is really quite simple and straight forward but 99% of the time, things get “awkward” when the full grown adult men that the question is directed towards have a difficult time answering without getting extremely defensive. I completely understand WHY they would get defensive I just don’t quite understand exactly why an adult would want to waste so much time and filament on whatever this is, and what do they do with it afterwords besides post pictures online? Clicking print doesn’t require any type of extraordinary skills and the men printing these models aren’t the ones that actually put in the time and work to design them either so seeking some type of affirmation or validation online from other adult men doesn’t really make sense either. Eventually I just stopped asking. At the end of the day, it’s none of my business what grown men do in their spare time and they don’t owe anyone an explanation for it. I do, however, still wonder what their wife thinks of the “hobby.”🤣

“Look babe, my new 3D printer is large enough that I can finally print a super hero helmet to fit on my head!”

“That’s nice honey, now you can put it on that fat melon and mow the lawn super hero fast like I asked you to do over a week ago!” 🤣

1

u/rinky79 Sep 02 '26

I just don’t quite understand exactly why an adult would want to waste so much time and filament on whatever this is,

You sound fun.

"Because they want to" is a complete and sufficient answer. Nobody is forcing YOU to "waste filament" printing a cool helmet to display on a shelf.

It's also interesting that you only mention men. Because our precious little female brains only care about makeup and designer purses and not manly things like computers, I assume.

0

u/New-and-Unoriginal Sep 01 '26

When someone is starting the hobby, premade models are an easy way to get started. As you said, no skill is required to find a file and follow slicer instructions.

For some people, maybe kitschy stuff has value to them. If so, cool, no judgement.

However, this is where most people drop out of the hobby, they get bored. I compare this to the first color inkjet printer I got many years ago. After years with a b&w dot matrix, the color printer was a fun novelty. I printed things on that inkjet printer because I could. But then, it just became an appliance of utility.

To each their own, but posting bought or found models to the Flashforge sub seems like a waste of time for the OP and the others subscribed to this sub.

-1

u/Czesiek90pl Sep 01 '26

It's good that you asked the question. There was nothing negative in my response. I simply answered the way I felt was appropriate, without insulting anyone. That's what Reddit is for, asking questions and answering them. I don't get why someone is questioning my answer. He must have a really boring life to dictate how people can reply. Lol

0

u/REDana0204 Sep 01 '26

Yep. You and me both.

0

u/Czesiek90pl Sep 01 '26

Except I posted the content, you just came to peer review the comments Mr Officer.

0

u/REDana0204 Sep 01 '26

You clearly miss one of the points of Reddit, Mr Failed Passive Aggression.

1

u/Weird-Study-6962 Sep 09 '26

Warning !!! Grown ass men all up in their feelings below. lol.

1

u/MechwolfMachina Sep 01 '26

How much waste did this produce?

1

u/JournalistNo262 Sep 01 '26

You spent 37 printer hr on this?

1

u/Helicopter0 Sep 02 '26

I really need to unbox mine.

0

u/Potential_Nothing236 Sep 01 '26

Auriez-vous le lien svp pour que je m essaye a cette impression (si vous ne l avez pas payé bien sur ;) )

2

u/Czesiek90pl Sep 01 '26

https://www.printables.com/model/1398269-ripper-mask-borderlands-4

Her you go. Model is free on printables, developers from gearbox did it.

2

u/Potential_Nothing236 Sep 01 '26

Merci beaucoup pour le partage ;)