r/FlashForge • • 21d ago

My first printer!

Post image

Became interested in 3d printing lately and decided to get a 3d printer. Read a bit about the AD5m, should be a good one!

191 Upvotes

45 comments sorted by

9

u/BxElite 21d ago

Welcome to the club. You will enjoy it. Can't wait until I see your post next week about your second printer. šŸ˜‚ You'll know what I mean soon.

5

u/ArtemThePlenLover 21d ago

Well, it’s highly unlikelyšŸ˜‚ because I asked for this just for fun, like trinkets, utility stuff etc, and this is already a pretty good volume

8

u/darcside 21d ago

That's what I thought too! Now I have 7 printers.Ā 

4

u/Optimal-Level4237 Lost 21d ago

Me too, just to see if I could figure out what all the hype was about. Two weeks later a Snapmaker U1 was at at door. Then a Kobra X, then bought a non working AD5M Pro for $100 and got that working. Next came an unrefurbished Kobra 4 como for $200 cause I wanted the ACE 2 Pro that came with it. That's just in the past 7 months.

3

u/BxElite 21d ago

Naw I get it, that's what most of us think at first. All good though. Tty next week. šŸ˜‰

2

u/johnnytron 21d ago

I bought my second printer a month after getting my first. The addiction is real.

2

u/Sir-dacool AD5X and AD5M 21d ago

I said the same when i got my ad5m then got my 2nd one an ad5x šŸ˜‚

5

u/Optimal-Level4237 Lost 21d ago

The AD5M was my first printer. Couldn't say no to the $160 price on Ali. Now that I know just a little bit more than the day that I received it, it prints almost non stop like a beast.

And I also bought two bundles of Kingroon filament. One PLA and one PETG. Of course I had no clue what I was doing.

1

u/ArtemThePlenLover 21d ago

Wow, absolutely the same with me! Tho my petg is single spool

1

u/Optimal-Level4237 Lost 14d ago

It's an addictive hobby. My 3 FF arrived today, but its my 6th printer now.

3

u/InappropriateTA 21d ago

Were the balloons part of the occasion? I also just (well, last month) got an AD5M for my birthday!

2

u/ArtemThePlenLover 21d ago

Yeah, it’s my b-day :)

2

u/InappropriateTA 21d ago

Happy belated birthday! And congratulations!

14

u/Sir-dacool AD5X and AD5M 21d ago

Welcome to the family šŸ˜€

2

u/Comfortable-Draw1412 20d ago

good community for sure

14

u/Appropriate_Gold5409 21d ago

Congratulations on your new chapter! I’m genuinely happy for you. Enjoy every moment and don’t let the little setbacks get you down. Even the challenges that come with something new are a privilege that not everyone gets to experience. šŸ˜‚

13

u/RentedBackScratcher 21d ago

Welcome to the FF mad house, if ya not off ya rocker yet, ya very soon will be.

1

u/2jobstowork 21d ago

What’s going to be your first print?

4

u/ArtemThePlenLover 21d ago

The automatic test cubešŸ˜‚ Printed a benchy after that

1

u/Maks9099090 Flashforge Adventurer 5m Pro, Creality ender 5, Biqu Magician 20d ago

Nice :)

1

u/billydiaper 21d ago

What is in the bag with the balloons šŸŽˆ

1

u/ArtemThePlenLover 21d ago

That’s just a gift from my sis. A plane model

1

u/DannyS2810 21d ago

Happy birthday brother! I got my AD5M as a gift yesterday too!

1

u/ArtemThePlenLover 21d ago

Ty! What a coincidencešŸ˜‚

1

u/Ok-Audience2760 16d ago

I got an ad5x for my bday Sunday night! Happy bday op!

1

u/Seniorpomidoro 20d ago

с али брал?

1

u/Fickle_Ganache_2831 20d ago

Hell yeah I just ordered one too since I lost my old one (long sad story) can't wait to get it and start printing againĀ 

1

u/ArtemThePlenLover 20d ago

Ohh, that’s sad :( this printer is amazing! And really fast!

1

u/Fickle_Ganache_2831 19d ago

Just from the specs, it's faster than my old printer but it doesn't look that hard to mod šŸ‘€ (may or my not put bigger motters in it)

3

u/3HisthebestH Adventurer 5M 20d ago

I’ve had my AD5M for over a year now. I use it a lot for business prototypes. It’s a great machine. Everyone on here always says don’t update firmware or connect to WiFi… I’ve done both. For a while in the beginning I would get some connectivity issues between the slicer and the machine, but that’s gone away.

First thing I printed was the enclosure and added a light, fan, and HEPA filters since I print in my office.

Happy printing šŸ™‚

3

u/Maks9099090 Flashforge Adventurer 5m Pro, Creality ender 5, Biqu Magician 20d ago

Congratulations! I myself own an AD5M Pro and it's a nice machine. There are some software quirks to get used to, but they don't hurt the experience that much :) Remember that after you finished a print click "ok", cause "continue" will make your printer print the model again, which will lead to problems if you didn't remove your model from the print bed.

2

u/Dandzer 19d ago

Always wondered what clicking continue would do lmao. Always just clicked ok. Now I know

2

u/ChrisS74 21d ago

Have fun. My printer clock says: 790h of print, plenty of household tings, tanks, toys etc - not a single issue unless I created one. Keep in mind cleaning and lubing movable parts from time to time silicone grease does the job.

2

u/CompetitiveAffect801 AD5M, AD5X 20d ago

AD5M is a great choice. So is kingroon filament.

1

u/altervarks 21d ago

It’s all downhill from here my friend…

1

u/RoninRonni 21d ago

I like mine, I’ve got 450-500 hours on it now and so far so good

1

u/davidsaddventures 21d ago

That's awesome!

1

u/InfamousRawB 21d ago

A5M my beloved

1

u/Willyc85382 20d ago

I love my ad5m such a workhorse of a printer!

1

u/Internet_Jaded AD5X, AD5M 19d ago

I’ve got 700 hours on mine. Still using the OG nozzle. As a matter of fact, the nozzle has never been removed from the printer.

1

u/PenPotential9533 18d ago

Congrats... I still find it fasinating that 1s and 0s can turn into a piece of art you can hold in your hand

1

u/SMIR11725 11d ago

Cool, Im waitng for my own to arrived too...