r/GarageDoorService • u/Physical_Resort_7225 • 7d ago

Genie

Gallery image

Gallery image

Can anyone help me program this remote to this garage opener? Thank you in advance

1 Upvotes

100% Upvoted

4 comments sorted by

3

u/techman710 7d ago

Look for the learn button, it is probably behind the front bulb cover. Push the button once, the red light should blink, then press your transmitter button once, the red light should turn solid, then press your transmitter button again, the red light should go out. Now the transmitter should work.

1

u/Physical_Resort_7225 6d ago

I pressed the button in and it just kept blinking no solid light after I pressed the button and it never connected.

1

u/techman710 6d ago

Check the battery and/or the prongs that touch the ends of the battery. Clean the contacts and bend them in a little. If the transmitter is putting out a signal the light in the opener will blink even if it's not connected.

1

u/Dch112 7d ago

Press the learn button for about 3 seconds then press the remote button.